Firewood Stand Repair and Bluetti AC180 Portable Power System Update -E183

Рет қаралды 671

10 ай бұрын

Hi everyone. We had to find another rainy day project due to the recent weather. We've been putting this little repair off for a while but it felt like the right time to get it done! The Bluetti AC180 portable power station continues to amaze us.... we are really enjoying this unit!
Bluetti AC180 Portable Power Station
bit.ly/3PpY8QU
Important Note: All videos on this channel are intended for entertainment purposes only and not intended to be instructional in any way. The creator does not represent or warrant the accuracy, or proper, safe or intended use of any equipment or practices presented in the videos. Viewers should consult their own manufacturer instructional and safety information including any local laws applicable to the similar use or operation of any similar or same equipment before use. These videos are not intended to be relied upon for such correct or safe operation of same or similar equipment or practices.
This video is sponsored.

Пікірлер: 24

@chrisbubar6604 10 ай бұрын

Life is valuable. Great that you can do what you love. Friends memories last forever. Take care

@OakMountainAcotts 10 ай бұрын

Thanks Chris… we are blessed to be able to do what we do!

@billdawson8458 9 ай бұрын

Good call. Enjoy the deer hunt and good luck!

@OakMountainAcotts 9 ай бұрын

Yes Sir, thanks!

@PapaRug.58 10 ай бұрын

Sorry for your loss 😢😢 remember the memories and cherish them Good job on the shelf straightening/support 😊😊

@OakMountainAcotts 10 ай бұрын

That was a good way to put the morning in and reflect a bit!

@larrykerr7712 10 ай бұрын

Sorry for your loss.Another job well done.

@OakMountainAcotts 10 ай бұрын

Thanks Larry. Life is short…

@user-nr2xt9ds8p 9 ай бұрын

Love your background siging at the beginning!

@OakMountainAcotts 9 ай бұрын

Thanks, it is a commissioned original!

@richardbrowne1679 10 ай бұрын

Sorry for your loss Jason.

@OakMountainAcotts 10 ай бұрын

Thanks Richard.

@noelstractors-firewood57 10 ай бұрын

Sorry to hear about your friend Jason. Great power unit to have, great backup. Have a great week. 🪵🪓🇨🇦

@OakMountainAcotts 10 ай бұрын

Thanks Noel.

@savagefirewood 10 ай бұрын

My condolences Jason regarding you’re good friend Todd . It’s always a pleasure to watch you’re channel a fellow East coaster my self born in N.F.l.D cheers to you and family.👌🏻🔥🇨🇦

@OakMountainAcotts 10 ай бұрын

Thank-you, lots of reflection this past week thinking about all of the great times over the years...

@bobfitch607 10 ай бұрын

Jason sorry for the loss of your good friend. Celebrate the memories of the times you had. Prayers for the family

@OakMountainAcotts 10 ай бұрын

Thank-you.

@savagefirewood 10 ай бұрын

@@OakMountainAcotts Happy Thanksgiving!

@welderman1221 10 ай бұрын

Love that new intro song, your father sings it, did he write it as well???

@OakMountainAcotts 10 ай бұрын

Yes he did!

@thetree1994 9 ай бұрын

Hey just a heads up that I don’t think that’s the intended use of the power lifting feature. Power lifting increases usable watts to 2700w continuous but it lowers voltage to be able to do it, which ac motors like your chop saw aren’t a fan of. Power lifting is intended for resistive loads like a hair dryer or toaster or space heater. However, the AC180 should be able to handle the peaks of the chop saw, as the inverter is rated for 1800 watts continuous but 2700 watts peak just as it is.

@OakMountainAcotts 9 ай бұрын

Good information, thanks! It seemed to handle it okay but good to know!

@thetree1994 9 ай бұрын

Yeah I could see it running without trouble with power lifting on. It’s probably not that bad, it’ll just increase the heat produced in the motor from the extra current required to maintain the same power level at a lower voltage, theoretically reducing tool life. But like I said the saw should work just fine with power lifting off.