LETSDIG50 to get 50% off your first Factor box at bit.ly/46jVDWe

I'm sure Chris will take a harder look at making sure all his vehicles have updated fire extinguishers after what just happened.

There’s nothing worse then a hydraulic line blowing on a hot machine. Been there a few times myself. But I must say that was scary! Well done chris!

I am sorry about the hose/fire problem. You handled the whole matter very well. Best wishes.

Sometimes you write the script, sometimes it writes itself! I think you handled the situation quite well, and after assessing the need, just went ahead and did what had to be done. Just another day on the job. Well done, Chris.

Glad you are alright after that and it doesn't look like any equipment was damaged.

That was a close call on the fire sir, nice save on the 6 KITTY, that’s one time dirt on machine was your friend. Thanks for the update sir, enjoyed it.

the powder in the ire extinguishers gets caked up after time - you can rap them with a rubber hammer and that will loosen them up - you can check them by holding them in middle and slowly tilting them left to right - you can feel the powder running back and forth - it's a common thing for extinguishers mounted on things that move , the vibrations make the powder settle

Haha! I didn't see the commercial coming. Top quality fire extinguishers are worth their weight in gold.

Hydraulic hoses don't give any warning in my experience, Surely Chris has the same experience. Off to the shop for some hoses AND a working fire extinguisher. The dirt was probably easier to clean off than white chemical dust anyway, so that's the bright side 🙂

I’m glad you were safe during that situation and it shows that staying focused and not panicking allowed you to find an alternate solution to extinguish the fire when the extinguisher malfunctioned.

John over at Farm Craft had a fire extinguisher fail on him while fixing his boom lift. He did a segment on how fire extinguishers need constant maintenance like turning them over to unpack the solids, having them recharged and replacing them when they reach the end of their life, check the bottom. Also, as John found out, mud dobbers love to plug up the tip, which can render them useless in an emergency. I would have all your fire extinguishers checked out by a professional or replace of they are expired.

You know that Volvo’s got the beans. Moving that dozer around like its a toy 🌴👍👍😜🌴

I just love that old 6 glad you saved her life today !!

Try to mount the extinguisher horizontally. Mounted vertically the powder packs into a hard mass into a space of constant volume. Horizontally, th space is wider at the "top" and will break loose easier.

I usually skip adds; watched the factor one. Chris, you are good at that!!

It's always something ain't it? Just glad you got her put out. And no injuries or heavy damage.

Hope damage was minor, quick thinking to use dirt to quell the flames. Quick tip: check dates on all fire extinguishers, once a month turn extinguishers upside down and tap to free up the dry chemicals and rotate the pins slightly back and forth to keep them free since your equipment is outside all the time.

I used to have a saying in my old career. "I can't wait to get to work and see what's going to happen today." Loved that job.

That is the perfect example of Murphy's Law, "Anything that can go wrong will go wrong, and at the worst possible time."

Every time I see that sun-faded fire extinguisher in the video, I always wonder if it would really work if needed, now I know. Glad you got it out.

A valuable lesson to everyone watching and all of the other KZfaq folk.... Fire extinguishers for every piece of equipment, truck, home and some in reserve ! You can bitch about the cost but its nothing compared to what could happen. Besides, it will send out a valuable message and maybe save something much more valuable than a machine ! = )

G'day Chris. Bloody lucky with the fire mate. Some of our rural fire brigades here run a free extinguisher service. They come to your work site twice a year and check your extinguisher and make sure there charged and ready to go. If there dodgy they will replace them for a small donation. Great service.

With ABC powder extinguishers… you have to monthly tip the price extinguishers upside down and shake them to loosen the power inside as the power will compact on itself inside! Even if not stored standing up on on side the power will compact! If need to use before need to shake it turn upside down etc to make sure powder to flow!!!! Or you get what you got cluster F

With dry powder fire Extinguishers, the powder will settle to a hard mass in the bottom of the bottle through vibration. It is good practice to turn them upside down and give them a thump or two and a shake up regularly and check the guage to make sure they have pressure. Quite often they won't work when needed. It pays to have a few around a piece of equipment. They are cheap insurance. Love the D6. Brings back childhood memories. Ran a D4 when I was 6 years old back in the 60s then sometimes the D6 when my Dad wasn't on it. Clearing young eauculipt forest for farming ground. Didn't have fancy gear then but we did have electric start! Cheers from Tasmania

Factor Meals can Also be Prepared on Dozer Motor...🔥

Chris, Pro tip if you don't already know. Put a foam ear plug in the nozzle of your fire extinguishers so dirt dobbers can't build a nest in them. That's another thing that will ruin your day if you go to use it and it won't spray.

Glad the fire wasn’t worse. We had a Big Red Taylor catch fire similar to yours. Hydraulic fluid spraying on the turbo, happened fast. Glad you remembered the 6’ mechanic rule when moving the dozer to where you could work on it 👍🏼

Wow, lucky Chris. I was a faller on a logging job once we used probably 10 fire extinguishers and the entire crew tossed shovel fulls of dirt on the fire, but it wasn't enough and the cat feller bunch burned to the ground. When things are so hot in the engine compartment, it's very difficult to put the fire out and keep it out. Great job with the quick action!

Wasn't expecting the ad spot. I'm not mad about it. You deserve it!

Might be a good time to check ALL the extinguishers on all the equipment. Might also be a good idea to check them at least every year if not every six months.

Wow good save, quick thinking throwing dirt on it.

The old D6 will brush that off! If that had been your Komatsu you would likely have serous issues with slightly singed sensor wires giving the computer a fit! Is there no way you can add a water tank to your service truck for a additional line of potential fire fighting?

When you said “fire in the hole” we didn’t think you actually meant it. At least it didn’t hurt the machine.

Wow. Quick thinking on the fire, glad it didn't do any damage (at least that you can see now). Well, you are the first to inspire me to try Factor. The fact that you have endorsed this when you have someone who makes awesome-looking meals impresses me. Gonna have to look for real. Thanks, Chris. And I love, love, love that ad. A microwave in a bucket is great!🤣

Hi well first thing to say is glad you are OK and safe, now as a first day-back goes you won’t forget that one in a hurry, you first cook your lunch then almost cook the dozer, hope the damage is not to severe, but as long as your well we can be glad. 👍🐝🌞

Volvo pulling a Cat around makes for a great video 🤣🤣

Sure looks great once you rake it Chris, hey are you going to have a video on the dam with Mike( DIRT PERFECT )? Good thing you got the fire out my friend! Yeah, it’s always something but at least you’re safe and the D6 is ok! Thanks for sharing Chris! 🙏🏻🙏🏻🙏🏻

Chris, I think you caught us all off guard with the Micro-Wave, great Video.

Glad you got it out wow that was close definitely seeing you checking the fire extinguishers on everything else now thanks for sharing

'Least it wasn't too bad. Low-cost warning that your fire extinguishers should probably be upgraded. Thankfully you caught it quick, before it could really take hold and screw up the engine!

As much pounding and vibration as the machines take, it's a good idea to turn your extinguishers upside down and tap on them with a dead blow hammer every couple of weeks to make sure the powder isn't compacted inside. Nothing worse than an extinguisher that won't work when you really need it.

Great to have you back my friend. So glad you werable to put the fie out on the D6. A few hoses and will be ready to put in more hard days work.

Is Factor your first paid product endorsement? Well done!

Don't forget to get some new fire extinguishers. Good thing you saved the dozer. Smart use of the dirt.

The problem with dry powder extinguishers is that the vibration of the machine packs the powder so it goes hard. Trick is to have multiples of two each mounted at 90 degrees. For example one mounted vertically and another mounted horizontally and every month or so you swap them over. Bonus with two extinguishers is that you have twice as many chances to succeed. You also have twice as many chances to fail. Such is life.

Sorry about the fire but at least it didn't total your machine. She must have been mad at you for going to the expo and playing with new toys! LOL. Love how you popped up with a microwave in the middle of your work site. Haven't seen anyone else do that. Hope it was tasty. Time to upgrade your extinguishers, or at least have a couple newer ones on your fuel truck or pick up truck whichever is parked closest to your work area. Best of luck!

Reminds me of when my neighbor lit off fireworks and set another neighbor's tree on fire. His wife is going get the hose, I said no time and took off my shirt and beat the fire out with it. Then I got the hose and soaked it. Gotta keep your fire extinguisher maintained too Chris, it's a piece of equipment.

The commercial did give me something to think about but I don't have the set up for a microwave. Glad Chris does though.

That's life! Always something for sure. Wouldn't be dead for quids though :) The fleet looks good on the job site too - stumper revenge - loved it.

"Oh Sh*+ we got fire " enough to make your heart skip a beat or two. Glad it wasn't worse than it was .

If you can find them go with the halon extinguishers. Dry chem will settle out and get hard. Every so many months on dry chem. Remove from holder and turn upside down and shake them up to loosen the chem.

Chris, I hate in-video commercials, but I have to say, the way you did this, I love it. You did some product testing for a leaf blower a while back that I thought would be great so I ordered it and it was ok, but when the batteries died I couldn't find any replacements so the whole thing went into the trash and I bought an AMERICAN made unit. I am still willing to try what you endorse here even though I love cooking, I just hope and pray for your sake that this isn't going to be a disappointment. I'M COUNTING ON YOU CHRIS!!!!!

Momma said there'd be days like this, but you handled it well, Chris.

The dirt slinging fire extinguisher matches the era of the D-6. JS

“Fire in the Hole” 9:55 - talk about foreshadowing…

You kept your cool and are becoming an experienced Equipment Fire Eradicator. First the volvo excavator and now the dozer. You also used the Smokey the Bear procedure of putting out a fire👍👍

hmmm Chris looking at Dozers at C&C and the D6 Blows a hose and gets all fired up over it. ha-ha the D6 is a vindictive machine

Well it turned out all right. Good reminder to check your fire extinguishers and I'm going to get one for my truck and I'm also going to get one for my tractor. You never know. Good stuff. 👍👍🙂🇨🇦🔥

Building a pile of timber is a real science when you do it!

Had an identical hose bust on my D6c during a recent clean up operation. Fortunately no fire. Just like you I decided to change all 4 while I was in there. Also replace the hold down clamps since they were worn. You may want to check yours out. Like you stated, "it's always something".

The small fire didn't do any damage. It's not hotter the exhaust manifold allready was. And the heat is going only up.

Get that dry chem washed off as soon as you are able. It’s very corrosive to metal. I had one go off accidentally in a truck cab. Within a year the metal was rotting out.

Little smoke in the afternoon not a bad bad thing.. Good catch on the fire .

We're is part 2 of you helping Mike dirt perfect

The powder in the extinguisher gets packed down with time and travel. I learned to give then a good shake up and down to feel that the powder was moving inside. Then pull the pin and go.

That hose couldn't have burst in a worse place! Well done with the quick thinking and getting the fire out.

If it is an ABC powder fire extinguisher, you are supposed to put it to your ear and turn it upside down every so often to verify the powder is loose. It can solidify at the bottom and wont spray.

Just a little excitement to get the blood going. Check the dates on the fire extinguisher, and if it is a dry chemical, turn upside down and lightly hit the bottom with a rubber mallet. The powder gets compacted. I learned that as a firearm and working with the inspecting of all our extinguishers. A co2 one might be better. I'm glad you didn't get hurt and the machine is okay. Be safe out there.

I’ve seen lots of bigger machines burned to a crisp from hydraulic or fuel leaks. You got lucky! For which we are all glad! 🔥🔥🔥🔥

well, theres a reminder to check all my extinguishers...

I had a fire in a Ac unit and used the fire extinguisher powder type, was told by the machine agent to wash of with water as it is very corrosive ,hope this helps

its not just a job, its a adventure. glad everything is ok. I work for a bus company & every 6 months we have our extinguishers tested, the guys turn them upside down & couple of hits with a rubber headed hammer to break up the powder as with the constant vibration it settles & packs down.

I think you will need to buy a new Fire 🔥 Extinguisher for all of the machinery would be very useful

good wake up call to check your fire systems in all your plant!

Had the same problem with a small extinguisher that I carried in the cab of my truck. They used these in the shop where I worked, so I know they worked. When needed, turn the extinguisher upside down and rap it against something sturdy for a few seconds before trying to use it.

Chris I would get the next size up fire extinguishers as those little once just aren't enough. Happy to see you could put it out. Have a great day.

Chris glad you were near loose dirt to put out the fire. Quick thinking. Hope D6 doesn't have any major damage. We feel your pain and frustration.

Hey Chris, gives new meaning to fire in the hole! Betty says her fire extinguisher needs to be shaken quite often to keep the powder from packing inside from vibration! Even extinguishers that don't ride around in equipment need to be shaken before use or once a month. Bang them hard against something before use! It's why fire

That’s a pretty skookum looking “raker blade” on the dozer. Looks like the right tool for the job. 👍🇨🇦

Man, I love the ripper bucket on the big excavator. That’s fun to watch!

Dry powder extinguishers have one flaw- the powder settles and cakes when subject to vibrations long term. Once a month or so, pick up your extinguishers and give them a good turning upside down/ shaking. Odds are you'll feel the thump as the caked powder inside dislodges. For machinery like this with lots of oil and vibrations, I would consider foam extinbguisters. Also, you can't have too many/ too big an extinguisher!

Never a dull moment eh Chris......All in a days work....stay safe

Cool quick meal, but now you need a toilet under the truck seat

I bet Clinton will install a new fire extinguisher on a D7 for you. Good thinking on throwing dirt on the fire. Always good to turn the extinguisher upside down monthly and check the charge gauge.

Ok so I usually FF the ads but that factor ad was great, good on you for taking on a sponsor.

Well, Damn Man... That sucks first day back , and the damn hose blows !! Like ya said, always something... But, Great as always Chris !! Have a great Evening, And, On too the Next....

I always just rolled up a sub in foil and stuck it on the exhaust manifold about a half hour before lunch. If you're crafty, you can do pizza that way too. Don't sweat the hoses, new ones fail too. Good to replace them all, they're probably factory. Good move on the endorsement deal, get it while you can. Best regards from Indiana.

Well, that’ll get your blood flowing. Remember, you can always piss a fire out if you got some handy

The microwave on the bucket! 😂😂😂

I never thought you would put ads on your videos just makes me skip thru them.

...a good tip with fire extinguishers is once a year take them out, turn them upside down & tap the bottoms with a rubber malet. The cem powder can become compacted & this "fluffs" it back up. Of course, always check the pressure gauge too

As you know yourself todays Hydraulic hoses materials are so advanced, compared the 1900 years hose materials. We know Hydraulic hoses aren't cheap . But are necessary. Probably a good idea to change if possible. But hoses are hoses and it is wat it is. Good luck Chris, ps - glad to see you have excellent adatude for repair and replacement. Maintenance is generally the key issues. Thanks for videos

We had the same hose blow on a D6 back in the day. We said at the time running a hose above a manifold wasn't vey clever of CAT. Greetings from the UK

Tough break Chris. It happens. Main thing is that you were not injured.

Another day with sneaky surprises. Hopefully the damage was limited to just a couple of hoses. You will work it out quickly.

Geez Chris, you were lucky it would have been a bugger to see old Betty burn up. 👋

7:27 😂😂 not going to lie that’s so smooth came out no where 😊

Sorry about the D6 sir. Thank goodness the oil didn’t saturate the whole engine compartment with oil. Could have been a real big problem. Nice to see you back moving the earth. 👍

MM77 Approved 👍🏼👍🏼…………………………………………………………………A LetsDig18 infomercial AND a fire! Will wonders never cease!