FIRST DRIVE! After the Trick Flow top end kit, is the car fast?

No video

FIRST DRIVE! After the Trick Flow top end kit, is the car fast?

Рет қаралды 99,529

Күн бұрын

We take the foxbody Mustang GT out for the first drive after installing the trick Flow top end kit!
WIN PROJECT 4TO8
-Monthly drawings for parts, swag, gift cards, and detail kits
-All KZfaq content pre released
-Exclusive discount codes
-WIN PROJECT 4TO8, or a car build
SIGN UP NOW: : bit.ly/2Fk4GtU
Hot links:
npdlink.com
maximummotorsports.com
lasfit.com
riccardiracing.com
mustangweek.com
buystifflers.com
ourdreamauto.com
pbhperformance.com
jaxwax.com
Stay connected:
Instagram: @foxcast_media
Facebook: foxcastmedia
Website: www.thefoxcast.com
Email: caleb@thefoxcast.com
iPhone & Android mobile app: Search Foxcast Media in the app store, or Google play store

Пікірлер: 267

@dondagy9109 2 жыл бұрын

I have that entire top end on my 94 and she rips. Cam, heads, upper, lower, intake spacer. Also has svo roller rockers, 24lb injectors, full length bbk's, pro m mass air, cold air kit, flowmaster full kit minus cats, 4:10's in the rear, t-5, and she surprises allot of newer cars. Most fun car to drive ive ever owned. Oh and summit billet distributer, my stock one the pickup coil fell apart inside. Mine had real bad hunting issues until i put in a new mass air and took off a faulty msd coil and put a new motorcraft coil back on it. Ngk plugs and motorsports wires. And of course the 255 walbro in the tank.

@davidantiwan930 Жыл бұрын

Thats the perfect most fun fox body set up you can do i hate coyote swaps pushrod Only in fox low end torque is where the funs At id rather ls a fox then coyote it because pushrod is way more compact More low end torque easier and way cheaper to work on and I’m ford guy but ls is by far the best bang for the buck availability and readily available parts second to none. Facts are facts ford Guy or not. Facts not feelings.

@tobyallen2437 4 жыл бұрын

My definition of the perfect car just enough modifications we definitely put LX tail lights if I won the lottery first thing I do is drop a car off see you guys along with a blank check

@erikturner5073 4 жыл бұрын

I've driven coyotes and there nice drivers and make good power. Also comparing my experience with thoes cars to my notch with the nice street N/A combo that I've built for it I don't feel where I'm missing out on not owning a coyote. For some reason people either forget the capability of a nice Windsor build or underestimate our cars with them pushrod engines. These cars with a nice well thought-out pushrod combo are still gapping people on the streets even in today's performance climate.

@Ws6Ms 4 жыл бұрын

the old 302 is nasty... I had a 86 5.0 gt fbo 4.10 gears she was quick

@JoseGonzalez-nc2tw 4 жыл бұрын

Sbf pushrod!!!!

@florimshala1 4 жыл бұрын

The GT is such a gorgeous car

@J1Z06 4 жыл бұрын

every time i see an lx,i superimpose the gt bumpers on,etc! i can't wait to sell my z06 and grab my first gt convertible!

@2003cobramustang 4 жыл бұрын

Glad i found this channel love the old fox bodies! This white fox rips! Hope to see more of this fox!

@alandavis1245 4 жыл бұрын

Jeff Goss. check out 50tussin on KZfaq. also brew2L

@2003cobramustang 4 жыл бұрын

Alan Davis ok thanks

@MissionRestomod 4 жыл бұрын

Momma says he’s angry cuz he gots all them powers and no traction.

@willlloyd7762 4 жыл бұрын

Very nice. Very nice indeed

@nobodyjones3624 4 жыл бұрын

A coyote swap would’ve been the best thing to ever happen to that camaro 😁

@briantowe193 4 жыл бұрын

I like to see that to

@pagosplace3065 4 жыл бұрын

Amazing how you NEVER see that....

@downhilldaddy9346 4 жыл бұрын

💯

@CornFedZ06 4 жыл бұрын

@@pagosplace3065 amazing

@downhilldaddy9346 4 жыл бұрын

Matt birk without intelligence

@kennyellis7961 4 жыл бұрын

Sounds like she is pulling pretty good for sure,them dry rotted tires will have you facing where you just came from,lol.

@i-still-cruz2430 4 жыл бұрын

Glad you got it figured out 👍 Gonna make someone a fun little street car.

@cericj99 4 жыл бұрын

Oh I can't wait to take mine out in the late spring... Cheers from Canada

@6spd85notch 4 жыл бұрын

Sounds pretty good thanks for the update. You guys just gave it another 100k miles of fun

@ultraclassic1550 4 жыл бұрын

Love the white GT, had one like it, but got totaled out, keep the drivetrain...blueprinted & balanced 302 w/GT40P heads, E303 can, GT40 Intake, really strong above idle. Also have a 95 Cobra...would like to see a 6R80 or 10R80 mated to a SBF in a Fox or 95 Mustang. Adapters and controllers are available

@4vchuckles108 4 жыл бұрын

Stang turned out awesome! Cold air and a cold road makes for no traction but a lot of fun 👍

@swing2gether 4 жыл бұрын

How can you not have fun with a fox? Beautiful cars and so fun to be around mustang guys.

@charliesierra6919 4 жыл бұрын

Sounds sick! 93' Reef blue notch 5 speed in progress.

@19coyote5oh9 4 жыл бұрын

Love those old 🦊 bodies!!

@travisevans7502 4 жыл бұрын

That's all my car has is Trick flow heads stage 1 cam performer RPM intake 70 mm accufab throttle body 76 mm BBK MAF long tubes with 373 gears with t5 trans and Dyno tune not tones of power but tones of fun for a street car.

@dangerousfreedom4965 4 жыл бұрын

Travis Evans makes a very fun street car. I have the same setup I wish I had 3.55 gear vs the 3.73

@travisevans7502 4 жыл бұрын

@@dangerousfreedom4965 I kind of do to. If you want to do a burnout you have to use second gear because you're bouncing off the rev-limiter immediately in first and very little smoke but 2nd plenty of smoke.

@travisevans7502 4 жыл бұрын

Only ended up using 373 because everybody said it will work better for the quarter mile and I don't even drag race it.

@Multi68stang 4 жыл бұрын

Travis Evans I had practically the same setup in my ‘89 Fox but with 4:10 gears. Figured about 300 to the wheels & it was definitely a fun car to drive on the street. Hated the 4.10’s though & will be going to a 3.55.

@travisevans7502 4 жыл бұрын

@@Multi68stang yeah that's about what mine has right around 300 had it dyno tuning I think it was 292 hp 305 tq I don't necessarily hate the 373 could just be better with 355 on the street

@FastLanePros 4 жыл бұрын

Guy has one down the street just sitting in his lot next to his place and won't sell it. Love the GT

@bradleyhadden5057 3 жыл бұрын

Nice I have a 5.0 sn 95 only 80ths on it love these cars old muscle cars love working on them.

@Naipaul66 4 жыл бұрын

Is there a video of putting the top end kit together ? This is my next move on my 89 Gt

@reynaldorivera7641 4 жыл бұрын

I had a few mustangs like that. All of them manual, carb and built to race. Wish I still had at least one of them

@josephleonardi8977 4 жыл бұрын

If that car got you to school girl giggle then you know it'll put a smile on anyone's face!!!! Luvin it bro!😁👊👍

@Ls3guy 4 жыл бұрын

Lol I don't think there is room in a 4th gen for a coyote shit you can hardly change the spark plugs with a ls1

@GrumpyMJK 4 жыл бұрын

Totally agree! And the Camaro here is an LT1 so it’s even worse than an LS1. I’ve had both and in my opinion the LT1 is even tighter than the LS1. Its a real knuckle shredding experience to do a simple plug swap!

@erikturner5073 4 жыл бұрын

The LT1 is still a nice motor. People are still using that as well as the Windsor engine family.

@GrumpyMJK 4 жыл бұрын

Erik Turner Yes. I had a 93’ Z28 and even stock that thing was lots of fun. Also a very sweet sounding engine! Haha loved it!

@1991tommygun 4 жыл бұрын

Erik Turner lt1 is fine when working good and not leaking like a basket, that optispark shit blowsss

@Poohdaddymagic 4 жыл бұрын

TFS has been making foxes fly since the Fox came out. Proven performance...

@joe5.097 4 жыл бұрын

Good run for BREW2L

@dennisakers9672 4 жыл бұрын

GREAT BUILD YOU GUYS !!!!!EXCITED ABOUT THE SHOW!!!!!!!

@93stang19 4 жыл бұрын

Run the same combo in my 🦊. It isn't the fastest car on the street but def one of the funnest to drive.

@berardoferrari 11 ай бұрын

too bad he didnt tell us the cost.

@twinturbocoyoteftw 4 жыл бұрын

Walmart sponsoring you guys with those never start batteries???? Got em!

@disegnosys 4 жыл бұрын

Wow! She’s looking and running great!

@RadDadisRad 4 жыл бұрын

Sounds like a fun car. Looks like a fun car too.

@jasonjones281 Жыл бұрын

That top end kit is great.

@meatpopsicle4801 4 жыл бұрын

Do you answer questions regarding issues we may have with our foxes? You seem to know you stuff. 👍🏻

@meatpopsicle4801 4 жыл бұрын

ARTURO After install my idle gets stuck at a high rpm and will not come down, sometimes I have to turn it off then on again. That happens even while driving. I’ve adjusted timing nothing seems to help.

@GearHead704 4 жыл бұрын

The only tway she smokes now is by burning the tires! 😁

@corykinane2898 3 жыл бұрын

Am I the only one who thinks a coyote swapped early 3rd gen Camaro would be badass?

@romeoalphafoxtrot9517 4 жыл бұрын

That baby rips!

@RPJs-Cuisine 4 жыл бұрын

Nice and stout indeed!!! Love it!

@mikegay8511 4 жыл бұрын

I need a Fox Body Mustang. May is my deadline.

@trystian8539 4 жыл бұрын

Just wait for the right deal. You’ll find it.

@mikegay8511 4 жыл бұрын

For sure!

@columbiariverdetailing1943 3 жыл бұрын

There goes my credit card was debating on the trickflow heads and this made my mind up

@ironlife783 4 жыл бұрын

Camaros always make great boat ankers.

@konnerkramer329 4 жыл бұрын

I promise you if he did the same mods on that camaro it would absolutely whoop that foxs ass

@Theydotheharlemshake 4 жыл бұрын

@@konnerkramer329 it is also a LT or LS which is more cubic inches and newer than the windsor V8... not only that its expensive for parts and shit to work on

@konnerkramer329 4 жыл бұрын

@@Theydotheharlemshake ls engines are literally the most popular engine for hot rodding because they're cheap and easy to work on...

@Theydotheharlemshake 4 жыл бұрын

@@konnerkramer329 ...not in the camaro it isn't. everything is a knuckle buster in the fourth gen camaros. and it is expensive for the LT4 or whatever it is called in that car

@konnerkramer329 4 жыл бұрын

@@Theydotheharlemshake have you even seen the sn95, new edege and s197 mustangs... You have to pull the engine to change header gaskets... In a s197 a header swap is a 15-20 hour job done by a shop. Let alone by a couple of buddies having a few drink in a garage. You can do a cam, heads and intake swap on a Camaro without even taking the engine out. And btw it's an lt1 and parts are a hell of a lot cheaper than any ford modular motor

@wastedwagesmercuryman6018 4 жыл бұрын

Needs a filter on there before you try to diad the surge! Unstable air across maf will have it hunting!

@hotrodray6802 2 жыл бұрын

Definitely Needs 8" of straight tube ahead of MA.

@boostjunkieMike Жыл бұрын

The force is strong with thus one👌🏾😎😍

@hotrodray6802 2 жыл бұрын

MSD 6AL w 8874 cures those plug/ bad gas problems. JMO😎

@TheBb6prelude 4 жыл бұрын

My buddies convertible Fox is running down coyotes with only bolt ons and a gear lol. He’s getting a built rear and and head cams setup next.

@king18722 4 жыл бұрын

It was just 20 below zero here in Anchorage Alaska for 2 weeks straight lol

@aaronrogers7178 4 жыл бұрын

Great pulls man 💪👍

@frozenstang3868 4 жыл бұрын

i love the tach and shift lite, that would definitely stay if it were mine.

@keithcallaway5876 4 жыл бұрын

Man if I had the money I would buy this white FoxBody 5.0 for sure.

@chadkinsler9865 4 жыл бұрын

Y’all got it running real good

@daveg9002 4 жыл бұрын

Rite on bro i wish my vert was running like that

@markd6637 4 жыл бұрын

Running fantastic he says but it hunka surge and surging sometimes yeah you make sense obviously it's not running perfect if it surges sometimes smarten up!

@docstruthers 4 жыл бұрын

im considering a trick flow stage 1 cam, rockers, springs, exhaust, light port and polish on heads and a tune for my mountaineer 5.0. I entertained the idea of a Trick Flow top end kit actually but damn......$2500 or so? lol

@berardoferrari 11 ай бұрын

ALOT more than that!!!!! that wont even buy you the heads.

@highlifelowlivin 3 жыл бұрын

Did you have to do any kind of tune to it to get it to run good ?

@chrisarnold769 4 ай бұрын

Maybe put the build in the description? Are the heads 170s or 190s?

@aaronanderson7619 4 жыл бұрын

Need to find yourself an old school pneumatic abrasive plug cleaner. If nothing else it adds a tool.. Love mine.

@TejasToolMan 4 жыл бұрын

seeing this sure makes me miss my artic 88 gt hatchback, some douche stole it in Dallas a few years back found a few days later stripped to the chassis

@That77mav Жыл бұрын

I’m about to build a 302 for my 77 maverick

@travisevans7502 4 жыл бұрын

I thought you did change the plugs good to see it was a easy fix

@funfunfun7441 4 жыл бұрын

We should really do a 3.5 eco in that camaro. Lol

@dangerousfreedom4965 4 жыл бұрын

170cc heads?

@TheDanno81 4 жыл бұрын

Mine surged at idle like that too with older gas in it. Couple tanks of fresh gas and the surging stopped.

@trailerpark187 4 жыл бұрын

Sounds good, is there any car more fun than a fox, prolly not

@Dannyjoemustanggt 4 жыл бұрын

Yup sn95

@trailerpark187 4 жыл бұрын

@@Dannyjoemustanggt still technically a fox under all that sheet metal

@gregsmith8032 4 жыл бұрын

Great vid nice power ...!! Get some mercury combustion deposit cleaner put some on the plugs an leave in a jar with lid over night plugs will be like new in AM save som bucks outboard master mech tricks

@jameskocks4734 4 жыл бұрын

in my opinion these motors sound the best and this is probably an unpopular opinion but i dont really like the sound of the coyote and to me it sounds just like any other of the newer v8s out there today.

@andyp3213 2 жыл бұрын

I know this was a while ago but this kit says 360 horsepower so at the wheels say 300 using 24# injectors guessing. Question is what is the next step after (H C I) combo that would need to use say 30# injectors and 400 at the wheels? The combo that when it starts or drive by you can fell it or make you turn your head and say what under that hood? A push road motor that is without blower or turbo.

@yaboyskeet634 3 жыл бұрын

I currently have trickflow track heat top end kit, what would be great with this kit? 331 stroker kit or 347 stroker kit. What upgrades will i have to add/change if i go 331 or 347. Currently i am on stock 302 block with track heat top end kit 24lb injection I/H/E i made 300hp to the wheels “safe tune”

@FrankA-973 4 жыл бұрын

Awesome video...what do you think she makes at the tires? Looks like a extremely fun street car. Nice work guys.

@J1Z06 4 жыл бұрын

tire frying is f u n!!! awesome machine!

@seanraymotorsports2960 4 жыл бұрын

That setup seems healthy. What’s the cost of the upper n lower? I recently bought a explorer intake from a swap meet 75$ hard to pass up. Nothing like what you have but an upgrade from stock. I also bought a a9l in perfect condition for 30$ great deal.. I’d like to see what 1/4time your gt would get. I got a 14.2 98 with stock gears heads cam intake few basic bolt ons with a street tires and a shitty trak lok. Upgrading to a Yukon true trak 31 splines 3.73-4.10’s not sure yet and j have race slicks also with the explorer intake I’m trying to be a mid 13 second pass.. do you ever hit up fun ford event @ dinwiddie va. It’s mid June?

@houstonspeeds1610 4 жыл бұрын

I thought 1988 and before foxbodys didnt have a mass air...? I own an 89 with maf

@lurgee29 4 жыл бұрын

California 5.0s had a factory mass air meter in 1988

@holyvessel34 4 жыл бұрын

All the fox bodies I've had never liked the cold air intake. It caused idle problems and misfire sometimes.

@christopherwedemeyer2993 4 жыл бұрын

Have you done a coyote swap on an early foxbody? Like '79-'83 ish T bird or Fairmont or even a Lincoln maybe?

@Bledsaw89 4 жыл бұрын

Runs good! Stock tune?

@briandubbeld5665 4 жыл бұрын

Sounds AWSOME 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@sergiovazquez9259 4 жыл бұрын

Nice little car

@NorthernPerformanceGroup 4 жыл бұрын

That car is fast for what it is

@smartfeller1495 2 жыл бұрын

Did you need to do anything for fuel management, like a Megasquirt or bigger injectors or anything???

@lucasclift3196 4 жыл бұрын

What part of Tennessee you guys at? I’m about an hour East of Knoxville. Just took a 302 out of an ‘83 and about to put a whole new Ford Racing Block and all the bells and whistles and own a DSG ‘03 Mach 1.

@91frankenstang23 4 жыл бұрын

Glad ya got it figured out, so the new plugs fixed the ginormous smoke leak you had? Hmmm, learn something new everyday, lol.

@johnnywrench9669 4 жыл бұрын

300horse casket

@downhilldaddy9346 4 жыл бұрын

Not too shabby🤙🏾

@Shakerhood69 3 жыл бұрын

Car sounds good

@themrfabio2459 3 жыл бұрын

This kit is sold out EVERYWHERE

@TheMatfoh 3 жыл бұрын

What would be the power difference between a TF and GT-40?

@hotrodray6802 2 жыл бұрын

Noticeable above 5500

@pagosplace3065 4 жыл бұрын

Nice job guys! Very solid performer!

@codymallernee5258 4 жыл бұрын

Could i install this kit on my 5.0 95 f150?

@aaronrogers7178 4 жыл бұрын

Drive that car man

@19jody72 4 жыл бұрын

Is there a standard push rod length on a non decked roller 302 block using twisted wedge heads? By the way..what paint did you use, the black?

@jeffreychristianson9134 Жыл бұрын

Yes turbo noise

@eddiesellers8522 4 жыл бұрын

What did y’all finally set the timing at?

@californiakev1071 4 жыл бұрын

Eddie Sellers I was going to ask the same thing hopefully he replies.. I’m thinking 14

@centermass4962 4 жыл бұрын

Let her eat.😁😁😁

@HobowithaFesti 4 жыл бұрын

I’m selling the main parts to my trick flow top end kit and willing to ship on buyers dime lol

@ElverGalarga-qo7ix 4 жыл бұрын

HoboFive0h how much for the cam

@HobowithaFesti 4 жыл бұрын

Elver Galarga 200 it’s brand spanking new

@lingyguisar4149 4 жыл бұрын

What gears is it running??? Runs like a beast.

@jasonherrick2368 4 жыл бұрын

Sounds great 👍

@firebirder 4 жыл бұрын

Great video, great channel. After watching this video a couple of times in the last days, I ordered my trick flow kit yesterday. What ignition timing did you setup? Do you remeber it? Daniel

@EASTCOASTIMPERIAL 4 жыл бұрын

How do you feel about blueprint engines crate motor if your stock 302 is done for??? Anybody?

@brandonrickbornponyexpress6574 3 жыл бұрын

I'm wondering the same thing...

@schwarry1 3 жыл бұрын

Since you did this one, how is it now? Did it have a gear?

@josephsimmons4908 3 жыл бұрын

I have a 93 bronco I want to swap it over to mass air. So I can do some upgrades to the motor it is currently a SD 5.8 with an E4OD trans. Where can I find some info on the computer and harness for the swap