First drive - Ferrari engined Alfa 105 Alfarrari build part 199

Рет қаралды 95,364

8 ай бұрын

Porsche part prices at porschepartsbyjeff.com
Become a Patron to watch the videos ad' free a day before everyone else
/ homebuiltbyjeff
Home Built Merch homebuiltbyjeff.storenvy.com/
Check out the Weldclass welders I use at www.weldclass.com.au/
Raceworks parts can be ordered here www.tiperformance.com.au/bran...
My electrical power tester goo.gl/W3NyHS
Weld through primer amzn.to/2wLTwyM
Grinding respirator mask amzn.to/37rBpwt
Bead roller amzn.to/2JzFlk5
The Shrinker Stretcher amzn.to/2Zr7QWe
3 in 1 Sheet metal press brake/guillotine/roller amzn.to/31Jbe08
Magnetic Plug Weld Tool amzn.to/319COZh
Find more Home Built by Jeff
/ homebuiltbyjeff
/ homebuiltbyjeff
Mailing Address;
Home Built by Jeff
PO Box 1520
Bowral, NSW 2576
AUSTRALIA
Music:
lukelukess.com

Пікірлер: 407

@Matt-ty3ce 8 ай бұрын

‘Nothing is leaking! We have a winner!’ - new Home Built T-shirt slogan right there, mate! Well done and congrats again on some great Aussie content

@adamreturns1 8 ай бұрын

This car is amazing and I've loved watching the build. Hats off to you. Have you considered having a vinyl sticker made to cover the hood window edge to save painting the outside of the polycarbonate?

@myopinion69420 8 ай бұрын

I was thinking the same thing.

@jbg6961 8 ай бұрын

Me too 👍

@cannednolan8194 8 ай бұрын

Ya the woman who did my company logos can match the colour by printing a sample then you just check and pick a different yellow if not. Sure someone in your area can do it. An the cost is not bad.

@myopinion69420 8 ай бұрын

@@cannednolan8194 I was more thinking just black like the surround is currently. your never going to match the look of the yellow with vinyl, but a gloss/satin black? easy.

@callumoldridge9095 8 ай бұрын

Wasn’t Jeff an airbrush artist? Why not paint the outside in body colour with minimal masking req for the stripe also? I realise the paint on poly might not finish exactly as the body, but it’d look epic

@ironkcoony 8 ай бұрын

Hard to believe this journey is coming to an end - congratulations Jeff, enjoy your masterpiece!

@crownexclusive 8 ай бұрын

If you have to paint the engine window from the outside anyway, you might as well paint it yellow and silver to match the bonnet since you hate the black bezel. Congrats on the first drive!

@timothyfindlay6253 8 ай бұрын

What a win! So happy to see it come to life. Still things to do, a bit of PDR, bit of interior, nice tune and it will ready for adventure!

@HomeBuiltByJeff 8 ай бұрын

Yep. Getting close :D

@Earlysport 8 ай бұрын

This thing will be a blast to drive. Rear suspension looks way soft though - spring rates probably need a considerable lift.

@erwinzeeland9390 8 ай бұрын

I'm almost sad to see this adventure coming to an end. All of the episodes were a joy to watch, you built a true dreamcar. Massive respect to you and the mrs for sharing. Nevertheless I'm looking forward to the next project. Greetings from the Netherlands.

@lancia037project3 8 ай бұрын

You could make the polycarbonate window into an air scoop…….Best video on the internet today, love it, love the excitement and achievement……..”it runs, it runs and it cools” 🤣🤣

@Anders_HeymSR30 8 ай бұрын

Brilliant idea!

@alessiocarlevaro6934 8 ай бұрын

@@Anders_HeymSR30 not really, heat exchangers need a pressure differential to work efficiently. it's not a good idea bringing a lot of air behind a radiator. Different thing if it's used for a top mounted intercooler like some oem car do.

@Leonardo555ZZZ 8 ай бұрын

Maybe just a louvre to let hot air exit the engine bay..

@lancia037project3 8 ай бұрын

@@alessiocarlevaro6934 aaah, good point, thats why i am not a car designer :)

@danielprivate7442 8 ай бұрын

Snappy RPMs. NSW looks beautiful this time of year.

@hotroddevils5031 8 ай бұрын

...years building it, spitting gravel everywhere backing it out of the driveway the first time out. I love it!!!

@brianshorey 8 ай бұрын

I drove a GTV with a 200 hp 3.0 Busso V6 in it and it accelerated like a muscle car. With double the hp, handful will be an understatement. Can’t wait to see this thing really unleashed! Congrats Jeff! Btw, the plexiglass hood engine view is stunning.

@vladimirdjordjevic6771 8 ай бұрын

Build one grand prix 2.5.. gtv is awsome car...

@grouphistorics138 8 ай бұрын

Gtv6 is an all time great

@filthyoffroadadventures 8 ай бұрын

Jeff I love this car but most of all I love seeing how excited you are when you have successes. can't wait see the dyne run and for the horrible sound to be gone of the tail shaft rubbing LOL

@nathancuff6788 8 ай бұрын

Congratulations Jeff. It's been a long road to this milestone but its been a great watch for us! Looking forward to seeing the dyno setup and subsequent drives to see what a monster you've created.

@alistairbennett8563 8 ай бұрын

Don't forget to trim the shroud around the drive shaft. But a amazing build, great work.

@adriancoppola3729 8 ай бұрын

Fantastic job - love to see how excited you are at achieving such an important milestone! Congratulations 🎉

@andrewilliams3406 8 ай бұрын

Congrats Jeff. We all watch for this very moment.

@davidburne9477 8 ай бұрын

What’s to say! I’m sitting here watching you with a smile a mile wide on my face. Genuinely thrilling to watch.

@Series3V8 8 ай бұрын

Jeff, you should rightfully feel extremely proud of what you have achieved. I’m sure every viewer of your video will have a huge grin to match your own. Can’t wait for the dyno episode.

@LordandGodofYouTube 8 ай бұрын

She's a beauty! Absolute ripper job mate!

@tomlipscomb2211 8 ай бұрын

That is the high we are all chasing!! Amazing. And it’s so great to live on a private road 😂

@crustybmw 8 ай бұрын

Jeff as the owner of a 360 the check engine light will haunt you for the rest of your days.

@HomeBuiltByJeff 8 ай бұрын

Thankfully I don't have any of the Ferrari electrics so it shouldn't be too much of an issue ;)

@SpankysHotRodsandCustoms 8 ай бұрын

Great video Jeff,so close to being done. Thanks for sharing

@timfinch9392 8 ай бұрын

Love your enthusiasm, congrats on getting a drive. Just such a great build to watch and finally see you drive it.

@BossLinco 8 ай бұрын

Driving video says it all. Props.

@mariosnikolaou5212 8 ай бұрын

Can't wait to see this thing roar and spin the rear tires. I can't remember how long a have been a subscriber, neither why i subscribed. Though you have came along with this car. Nice work. Greetings from Greece.

@cartalkwithbuck 8 ай бұрын

So cool to see this thing finally on the road!! I remember the first time I saw this car was on the rotisserie as a bare shell. It’s amazing to see the work and dedication come full circle

@myopinion69420 8 ай бұрын

so happy for you mate. never been a huge fan of Alfa's, Ferrari's or yellow cars, but this car gets a massive pass on all 3, its a beauty of a car. looks like the 200th episode will be the dyno, nice.

@andywiththen 8 ай бұрын

Been here since day 1. What a transformation. Good work Jeff!

@kevinhamling1963 8 ай бұрын

Hey Jeff, Congratulations man it's a car. BUT it's time to concrete your driveway. So thanks again for sharing your journey. ✌️ Peace from Melbourne/Pakenham 3810.

@MrBeeMeR320D 8 ай бұрын

May i suggest painting that black edge in the yellow and silver to mach more with the bonnet ;) ? It looks and sounds amazing and it seems to be FAST :O I am so happy for you, your enjoyment at the end was great to watch. I hope you will be doing another project like this in the (near) future because it is absolutely amazing to see what you (can) do!!!!

@josephkelly4893 8 ай бұрын

Love that you show the true trial and error of working on cars bro, amazing little machine you have there.

@alman6581 8 ай бұрын

I feel your relieve and passion. You don't get many moments like that - I know - well done Jeff!

@Simb-l 8 ай бұрын

An x pipe and shorter mergers would make this exhaust sound even better.

@HomeBuiltByJeff 8 ай бұрын

It has an x pipe, but it is not necessary on flat plane crank engines ;)

@briansturgill5905 8 ай бұрын

I know we all look forward to Fun Facts with the Mrs. ❤❤❤❤❤❤❤ Great job man!!!

@anderscarlsson9617 8 ай бұрын

Congratulations Jeff! I bet there is a lot of pulling your hair and maybe a bad word or two between the episodes that we don¨t get to see. But I am so impressed by your stamina and dedication. It is a master piece of a car, even before it is fully sorted out and will be an eye candy where ever it is seen. Great job!

@ceesklumper 8 ай бұрын

Congratulations on a major milestone!

@HomeBuiltByJeff 8 ай бұрын

Thanks mate :D

@Low760 8 ай бұрын

I love your enthusiasm about it driving. I've always intended to watch your videos on this since finding you four years ago, watched a few vids but this is awesome. It's a great feeling when it comes together finally.

@dickaslet6769 8 ай бұрын

Congratulations Jeff. I have really enjoyed the journey so far and look forward to seeing what is next.

@markwalton8644 8 ай бұрын

Congratulations Jeff. The Joy on your face when there was no leaks, everything was working and that noise😊 i actually think with the work you've done to the exhaust it sounds more cultured than a 360 which really suits the Alfa. Looking forward to seeing this Scream on the Dyno but i bet you'll be a Bag of Nerves😅

@DarrenMartin-bw8zi 8 ай бұрын

Congratulations Jeff!! Been watching this build from day one. And now to see it actually drive is so amazing. I'm absolutely stoked for you! Now to the final few percent that will cap off this build. It's gonna be quite a beast with all that power. It's also looking really good. One peeve I have is how much the roll cage is showing through the windows. The silver/grey is quite prominent

@Peter-yt7xm 8 ай бұрын

Jeff, you'll need a copper washer under that locknut for the cam sensor and a bit of thread sealer for the nut on the sensor shaft. Otherwise, it will leak oil.

@BestKiteboardingOfficial 8 ай бұрын

That bell housing rub though, get it flared properly. Awesome job.

@BrendanJMcMahon 8 ай бұрын

Congrats Jeff! What a fantastic milestone! Can't wait to see what power this thing produces at the flywheel!

@TheRealFLX81 8 ай бұрын

That is so great to see it haul down the road for the first time, it looks and sounds amazing doing so! You sure deserve the giddyness of the maiden voyage after all the amazing hard work, so happy for you mate! :D

@Ianmundo 8 ай бұрын

you deserve that drive, what a journey! well done Jeff 🎉

@Cliff_Anderson 8 ай бұрын

Maybe it's just me, but I love this part where all the little refinements happen...the engine tuning, the suspension tweaks, creature comforts and all the icing on the cake. Great to see the genuine emotion from the first spin around the block!

@FTBonito 6 ай бұрын

You should use Sika primer 209D on the backside of the bonnet window, and then reglue it in place. Should leave a nice glossy black paint on the backside of the glass and no ugly black paint on the outside. Thanks again on your tip regarding the yaris steeringbox you gave me a couple of days ago! Found it😊

@leonardwashington6456 7 ай бұрын

You, sir, are a man of many talents. Incredible build, I've got to check out the dyno session if you've already posted it.

@tylerbarrett6652 8 ай бұрын

Oh, Jeff, that sounds so good running on all cyclinders! Love your persistence in tracking down all the fiddly bits/problems. So glad to see you driving that on the road.

@stuartstephens 8 ай бұрын

Congratulations! It's been a long road but you've done it!

@delahayenator 8 ай бұрын

Amazing project! Great how you solve all problems you bump into. The looks are really good! The stance, wheels, and the flares really turned out great. Much respect! ❤

@onepairofhands 8 ай бұрын

Jeff this is such great news, well done fella. Love your reaction to your drive.....builders everywhere know that feeling !

@namibgtv6 8 ай бұрын

The stuff that dreams are made of.. I cracked out my best headphones when i read ‘first drive’. Been anticipating this moment for a long time. Sounds fantastic. Jeff you are truly talented. This is by far my favourite YT build

@linuxram9390 8 ай бұрын

Good Morning Mr & Mrs Jeff. Its Sunday, it's time to drive a alfarrari... Finally. We'll done.

@ginny6170 8 ай бұрын

Hi Jack, you did a splendid job on the Alferrari. Compliments!!!!

@AW_DIY_garage 8 ай бұрын

When the leak is just a loose fitting, it is such a great feeling! Having to disassemble SUCKS

@steveanderson3942 7 ай бұрын

Hey guy, you made me smile, seeing you so exited, brilliant 😂

@florider_hd 8 ай бұрын

that bonnet window looks amazing! at first i wasnt sure but the engine lining up perfectly with the stripes is just so good

@ineedthatcar7169 8 ай бұрын

Congrats on the cricket Jeff! This build is the most legendary thing on KZfaq! What a crazy idea and only someone as committed as you could pull it off! Legend mate!

@richardbroom4324 8 ай бұрын

Amazing achievement mate. Your excitement is so very contagious

@dimimars29 8 ай бұрын

Awesome work. Looking amazing. Have watched this build from day 1. Awesome

@ronintres6757 8 ай бұрын

This is truly a fantastic sight to see the car driving down the road, and what a sound! Congratulations🎉

@rjung_ch 8 ай бұрын

Jeff, that yellow is just a beauty.

@motorv8N 8 ай бұрын

Incredible job! Even just coming in at the end now as I’ve done it’s obvious your tenacity and will to succeed is off the charts. Looking forward to going all the way back to the start to see this miracle machine rise from just the bits!

@woodzy575 8 ай бұрын

I can feel the joy Jeff, a ton of work is paying off. You can tell that engine loves to rev and just imagine the power when it gets in it's power band! going to be nutz

@jamesaldridge6899 8 ай бұрын

Lol, I totally know that feeling prior to Mrs Jeff coming on when the car eventually does everything as it should! Mate I totally felt your excitement! Well done fella👍🏼👍🏼

@MrAnticaArte 8 ай бұрын

Man I am so happy for you, can't wait to hear that beast on a dyno.

@andrewhansen4179 7 ай бұрын

When I owned my 1971 Alfa GTV, I went to see a red GTZ that was for sale near me. The car fit like a glove. Didn't have the money at the time.

@jasonscherf7553 8 ай бұрын

Out of all the cups of coffee we've had together over this entire build this one is the best!! Congrats and I can't wait to see this baby ripping in the wild. I think I for all of us that have been here since the beginning please don't forget the cameras when you drive her!❤❤❤

@bigmac60 8 ай бұрын

Absolutely love the sensor fix. Absolutely amazing. Great work well done 🇬🇧

@Duaneoca 8 ай бұрын

Your excitement was palpable. I was actually giddy along with you. Congratulations Jeff! 👏👏👏👏

@henkvandebeek7921 8 ай бұрын

Absolutely epic! So great to see it running. If I can be honest I was not a fan of the yellow when I first started watching but holy moly it has grown on me and now I can’t imagine it in any other colour. Epic!

@mdigs2364 8 ай бұрын

Relatively new to the channel, but wow! Love the raw emotion that comes with small and large victories. Don't go changing.

@redneckdiggers.bottlesandr9747 5 ай бұрын

Congratulations. Sweet ride you built. Always better when you build it yourself.

@danielepellizzon7895 8 ай бұрын

Congratulazioni from Italy Jeff (and Mrs. Jeff): I have been following this from the beginning and you deserve a BIG BIG BRAVO for that!!! Looking very much forward on how she drives and, maybe one day, to see her in person (I mean the Alfarrari).

@SilverHawk59 8 ай бұрын

Congratulations! I’ve enjoyed this build so much!

@xavier4025 8 ай бұрын

Thanks to share your build and this crazy story. Your work is incredible , you’re a genius. Marvelous idea and transplantation. 👍🏼

@willemjordaan4108 8 ай бұрын

Jeff, that engine of your Alfarrari looks sooo clean and neat, well done mate!!❤😂 Greetings from South-Africa!

@MatsGarage 8 ай бұрын

I 3D printed some small plastic caps to seal off live 12v studs. Made the end towards the wire slightly to small so it clips nicely onto the wire and stays in place.

@rossmorrison6459 8 ай бұрын

Great achievement Jeff not only are you very clever but patient as well. Looking forward to your next project.

@jamescunningham1774 8 ай бұрын

So happy for you and to see it drive at last!🎉

@NickintheStates 8 ай бұрын

So fun to see how excited he gets. So much work. It’s awesome to see it come together!

@jackkirmond9587 8 ай бұрын

I'm looking forward to the dyno run and seeing what she has, The power to weight ratio will be awesome. Congratulations Jeff. You've worked hard on this one

@johnbergen9663 8 ай бұрын

Jeff, your fabrication skills blow me way! Well done!

@jasonboggs5454 8 ай бұрын

Hi Jeff just came across your channel awsome build mate very well done.

@kiesh. 8 ай бұрын

Err, ill have you know 25° IS a hot day thankyou very much! (You're just trolling the brits there dude 😢) 😅 She sounds bloody lovely mate, always amazed by your resilience

@Torch4ya 8 ай бұрын

Congratulations, Jeff!🎉🎉

@fernandoteles4080 8 ай бұрын

It's just.... Speechless. With immense effort and dedication you can overcome stages.... It's beautiful... Better than leaving the factory. You have to be proud...

@rossmarzano 8 ай бұрын

I really like excited Jeff! Car looks and sounds mint, beautiful work!

@GarageItYourself 7 ай бұрын

What a brilliant feeling for you mate. It's sooo good when all that hard work comes together and pays off. 👌 Looking forward to that feeling when I get my project finished. Well if I ever find the time to get it to the finish line.

@TheTraveler1976 8 ай бұрын

Nice work Jeff! Once that car gets all dialed in, it will be a one of a kind monster!

@Callabrator 8 ай бұрын

Huge moment! Congratulations! Cheers from Texas

@Simon-xi8tb 8 ай бұрын

This dude is not a master builder, he is a frikin monster builder.

@alfakiwi5563 8 ай бұрын

As a fellow GTV owner, I have watched with great interest from day one. What a weapon. Bloody well done mate, and can't wait to see the beast stretch it's legs on a track.

@bobbyrudki3851 8 ай бұрын

Amazing Jeff, sounds great, looks amazing. Great work Sir 👏🏽👏🏽👏🏽

@DestroyerWill 8 ай бұрын

That is awesome Jeff I’m so invested in this build after 200 episodes ❤

@MarkoVukovic0 8 ай бұрын

Exciting times ahead, well done, what a beauty! Perhaps address that driveway next 😜

@TheCluelessEnthusiast 8 ай бұрын

Finally seeing this car drive was amazing. I'm just as stoked as jeff lol. It sounds awesome!

@user-xe2mo4fm2h 8 ай бұрын

Thats the best Alfa on the road by a long way! Masterpiece dude! Congratulations!

@djnmv 8 ай бұрын

Congrats on the first drive Jeff! It’s been a long time coming for you and well deserved! 😊 Have you considered reversing the car into the shed so that you can get up your driveway forwards which should help with the spinning wheel issue?