You’ll never hear a set of tires howl more than my Mickey tompson deegan😂
@blameitonchina2022 Жыл бұрын
I got those mine are so quiet
@joshritchie_media Жыл бұрын
@@blameitonchina2022 well then mine r cupped 😭
@joshritchie_media Жыл бұрын
Great work 👍 looks and sounds even better
@harleystillwell7519 Жыл бұрын
Thanks man!
@dylanfinch61866 ай бұрын
Your face when you turned it on 😂
@joebass517 Жыл бұрын
Looking & sounding great!! 👍 Z Life.
@boostboy7877 ай бұрын
You do hp tuners after the cam or you used the ct3 tuner u already have to tune the truck?
@harleystillwell75196 ай бұрын
I sent my ecu to mail order tuner down in Texas for the tune. I just use the cts to monitor it
@loweredyote8416 Жыл бұрын
Just curious on why you’d do shorty headers AND straight pipes? If you’re gonna have such minimal exhaust, you shoulda atleast made a difference with some longtubes
@harleystillwell7519 Жыл бұрын
Well I had the straight pipes before I did the motor work. And I didn’t really want to mess with long tubes but I needed headers because the stock manifold’s were in such bad condition. So I wanted to go with shortys for now so they’d just bolt right back up but I can easily Change that in the future
@loweredyote8416 Жыл бұрын
@@harleystillwell7519 ah that’s fair. I just kinda assumed you’d done full new exhaust. I found this vid while trying to find a exhaust setup for my Escalade since I’ll have Same cam
@harleystillwell7519 Жыл бұрын
A cammed Escalade? That’s the most bad ass thing I’ve heard today🤟🏼 and nope just left all that alone and focused on getting the engine taken care of for now
@loweredyote8416 Жыл бұрын
@@harleystillwell7519 yessir. 04 with the lq9. Cammed, ported/polished ls3 style heads, longtubes, 3200 stall convertor. Gonna do a fast 102 manifold later down the road. Should make 380-390 rwhp spinning truck tires thru an auto
@csosbe251 Жыл бұрын
@Harley Stillwell is this motor a 5.3? Dual straight pipes?
@chrishansen7004 Жыл бұрын
What gear ratio you have? I'd look into a set of 5.13's, I imagine with 37's it would feel like a stock truck with 4.10's. I know how long those gears feel in a 4L60 way too well 😅 if your really balling in the dough look at a gear vendors as well im pinching pennies for one whenever I get around to building my truck
@harleystillwell7519 Жыл бұрын
I have 342s😂 and somehow it felt pretty normal in town except for on the interstate it won’t even go into 4th gear till you let off haha, so it just screams in 3rd
@chrishansen7004 Жыл бұрын
@@harleystillwell7519 damn man that's gotta be rough, definitely get a set of gears in there soon. tall gears and big tires puts alot of stress on the trans
@lunatic_durango51542 ай бұрын
One question, is ur transmission upgraded???
@harleystillwell75192 ай бұрын
Yes it’s a built 4L65e with a shift kit, different servos and pretty much anything to make a 4l60 as strong as possible
@ixxloose Жыл бұрын
What heads did you put on it? Stock dish pistons?
@harleystillwell7519 Жыл бұрын
Stock heads just had them cleaned up and valves checked and new seals and springs to go with the cam. Stock 230k mile pistons
@alexortega1237 Жыл бұрын
will you make a video on how you did your brush guard with the body lift?
@harleystillwell7519 Жыл бұрын
Yes sir I will
@benjamintchappell8557 Жыл бұрын
How much did it cost for you to rebuild your motor?
@harleystillwell7519 Жыл бұрын
I have a stack of receipts I’ve been planning to go through and make a video. But if I was to guess I’d say a little under 2k
@Joecookjr111 ай бұрын
What size lift?
@harleystillwell751911 ай бұрын
3” body and 4” rough country suspension
@cadenfaris1005 Жыл бұрын
Does it chop in drive?
@harleystillwell7519 Жыл бұрын
It does a little bit, you can definitely tell it’s cammed. But I think my tune has the idle set way to high. It’s at like 850 rpm at red lights so no it doesn’t chop like it does in park
@tylersmothers172411 ай бұрын
How does this cam do with towing?
@harleystillwell751911 ай бұрын
It does okay ish is all I’m gonna say. My truck has 3.42 gears which absolutely suck so going down the interstate it doesn’t want to just cruise in 4th gear with a trailer anymore. But I pull my 2,200 pound boat a couple times a week a short distance and it feels the same as it used too. The only noticeable difference is interstate cruising
@tylersmothers172411 ай бұрын
@@harleystillwell7519 thanks for the reply I really appreciate it as I have the same gears. I don’t do alot of hwy towing but have a landscape company and do a lot of city towing. How is it in the city?
@harleystillwell751911 ай бұрын
Totally fine in the city I would say you’re perfectly fine. Plenty of torque to get moving it just doesn’t like to cruise over 80 mph. You’ll get a lot of customers when they hear your truck chopping!
@tylersmothers172411 ай бұрын
@@harleystillwell7519 awesome again I really appreciate ur feedback. it’s been hard to find a driving video of these cams. Stuck between this and the truck Norris cam,. They’re basically identical just slightly Different sounds. I also have a built trans with a stock converter like you so I’ll be good in that department. My truck has 280k with a lifter tick,. I’ve got a brand new short block 5.3 I just Got from machine shop. Going to just do a mild build looking for around 425ish! You gained a follower for sure,. Love Your truck and build 🤩
@harleystillwell751911 ай бұрын
Sounds like you’re all set up😎 thank you man i appreciate it!! And good luck. You’ll love either cam
@timmacrae32811 ай бұрын
Did you install the roof rack?
@harleystillwell751911 ай бұрын
Yep. It came off of a suburban and I cut it down to fit
@lspaul13 Жыл бұрын
What tuner is that
@harleystillwell7519 Жыл бұрын
Mail order tuner out of Texas
@IsaiasGarcia.IG. Жыл бұрын
Do u have link to tunner or info ph number website