That’s a priceless build a father, son,brother and family and friends make a priceless build. Great job

Ok Tucker, its time to thank your dad and Kevin for all the help, you are way ahead in life compared to others your age. Nice truck and continue to smile, Great work!!!

Most people have no idea the talent it takes to swap all this over, make it look factory and dependable, you know Clint loves his boys to no end and wants them to be safe!!

I sure hope Tucker appreciates the intense, complex and insane amount of work that went into his "Bloody Mary" pick-um-up. It was a great project.

I gotta say you guys broke Tucker in pretty good, he's almost camera friendly now lol! Great job on the bracket Tucker, and checking the welder but still welding it like they set it.

Tucker went from a "Bloody Mary" to a "Ravishing Ruby" (Tom T Hall song) 4x4 conversion with a new reman diesel motor, body and interior in close to showroom condition, its definitely worth every penny. Aside from the custom mechanical work, the cost replacement for a truck equivalent to Tucker's alone , would set anyone back a fine dollar. Count me in, it would be great to see another series with the square body crew cab GMC and donor truck Thanks Clint, Kevin and Tucker very enjoyable series.

I really liked the series and hope to see more. Really nice to see Tucker working right alongside you and making the build that much better. It was interesting to watch Tucker try to keep from smiling near the end of the video! Nice to see his big smile as the truck was driving along the road.

I have followed this build from the get go. This has been the best Fummins conversion I have seen. Best combination of custom built shop parts and usage of aftermarket parts I have seen. VERY WELL DONE.

Kevin trying to keep a straight face 😂😂. Thanks for sharing.

Nice build up there no so amazing when you consider the people working on it and don't forget the Dollar value way out of the reach of most but that's what you get when DAD owns a shop like he does he can afford to give some to his KIDS THIS is also good to see well done C C EQUIPMENT he will be one happy young man for a few years And yes bring on the gear change for sure CHEERS

A truck that anyone could be proud of.

the guy from happy gilmore you were referencing is carl weathers and he just passed away this past week

Love this build it turned out great

What a cracking build, And the bonus is father and son working together making memories, Drive safe young man and keep her in between the hedges. Looking forward to more episodes on this truck. Thanks for sharing and Respect from Scotland.

The Harbor Freight tools made the job easier. This has been a great build! I loved it! Clint, you are THE Dad of the year!!!!!!!!!!!!!

I love that he checked the welder and was like “Challenge Accepted”

I really loved it. I hope some more of this. Father is a walking encyclopedie in car and truck knowledge. He is the real brain after all this. Congrats to the whole team. Up to the next👍👍👍👍

That was “Lone Wolf McQuade” not “Walker Texas Ranger” but was definitely the idea behind the show Walker Texas Ranger, so close enough. Lol. I’m jealous of tucker, it turned out nicer then my OBS Ford Cummins build, definitely done very professionally and sold build for sure, don’t let anyone give you shit about it, its tuckers truck, and that smile on his face when he was driving it, made it worth it all. I believe he’d have no issue at all striking out to Alaska in it today, but if I was him id definitely go with at least 355gr front and rear, with that 5sp transmission, he’d benefit from that most definitely, especially in terms of fuel consumption. Get that thing geared just right, It should do really well on fuel mileage, as well.

Clinton you all did an amazing job on this truck! You are so full of knowledge and it’s nice for you to share it with us! Can’t wait to see the gear change video and I always enjoy these build series!

If I look in the mirror (without shattering it) and this truck shows up I'm not gonna be disappointed!

Live on a farm 4 miles off the pavement. Had a 5.9 24 valve Cummins straight pipe muffler. My wife could hear me coming 3 miles away.. good luck and have fun...

JEEZERS! All I can say is “HOLY SMOKE that’s a gorgeous ride!” “Bloody Mary” is a perfect name! Tucker, may God ALWAYS be with you and lead you to endless safe, happy miles! 🙏🙏🙏🙏 Dad, you did one helluva job! 👍👍👍👍👊👊👊👊

I am not a real Ford guy, had a few over the years but I like this truck. Nice job great billed.

Tucker says you're stealing my truck. Clint is thinking it's good to be King.

The truck we all built in our heads while in high school during the 90's.

Got up, poured a cup of coffee and enjoyed the video of "The screamin red love chariot " before I had to go to work👌

All I can say is your family is awesome. Your work is just unbelievably fantastic. Bloody Mary’s for all. All aside that truck is fantastic I love my 1997 C 3500 Silverado four-door long bed Dooley but I believe that Ford pick up body style looks better than my Chevrolet body style. My opinion only. Diesel for Diesel the Ford body style does look a little bit better than my Chevrolet. that is so perfect on that Ford in the visor above the windshield, I wish I’d kept mine instead of taking it off, but anyway all aside I love watching all your content no matter if it’s working on the pick up the jeep or the big stuff all your family time together joking around is just priceless. The family time together is simply priceless. It’s something that a lot of families are missing. They don’t spend the time together even at home. They don’t spend the time together growing up or otherwise and it’s a shame. I think I’ll leave it here and just say you guys are simply awesome and a great family business.

Mr Tucker, you came out of your shell (IMO) during this awesome New truck build! This truck got the Rare chance to be Reborn/rebuilt and it's a one of a kind, just like you are young man 😜. You and your brother have a great father and teacher, cherish all. Drive safe man 😊.

I’ll tell you I really hope you’re boys know how lucky they are to have you and your wife as parents. Wow what a project it came out unbelievable. Great work to all that helped it definitely took a small army to pull that off.

I’m really enjoying these videos of the Ford truck. Which really surprises me because I’m not a Ford fan. But I love what you guys have done with this truck. Thank you for the entertainment. Clint you and your wife have done a terrific job raising your boys. Hope they continue to be a part of your videos. Once again great video.

Kevin seems sad because he lost his truck. Great series . God Bless and enjoy your truck Tucker.

Great job Tucker that pickup is a one-of-a-kind no one else will ever have a pickup truck like it, great job now you say it's for your girlfriend does she know how to deliver a stick shift if so she is something special know of days that is rare to see rarely now, a day's people, only know how to drive is automatic's transmission's only. 1 thing Tucker, technically, your Dad other than who is assigned to that, special license plate is allowed to drive your truck in that shape until you are completely done with the total truck. Congratulations on your first truck, like that, keep it in good condition that truck will serve you well as long as you don't drive crazy as I see out there on the roads today. Keep the interesting stuff coming out all of you ladies and gentlemen all of you are great! Sincerely! R.S.V.

That is one SWEET ride. That’s a priceless memory for y’all. It’s nice to see those priceless memories you’re creating with your boys. I just knew ol’ sausage fingers would come up with a good idea for that center piece you cut out of the hub cap. 😁 Let’s see that gear change.

You got my attention with the cruise control working on first attempt thats a lot of experience to get the electricals working w/o many gremlins IMPRESSIVE. I currently have 3 6BT and two 4BT for resto-mods and usually push to just shy of smoke for about 350-400HP for 4BT and up to 600HP for 6BT at 4200RPM and they do start fast cold with no electromics. These motors are so easy and reliable it's sometimes easy to forget to let them warm up. Great job with no drama for a super tricked out conversion, you make it look so routine, amazing. Ray

Congratulations, Tucker. Awesome video, great memories, and wicked truck. All that boost Bubba 🛻💨💨💨

Never gets old watching a family oriented channel..refreshing in these days..what's ever cooler is now hunter has the coolest baddest truck around! Back in the day that would be a "chick magnet"..my son is named hunter also...love this channel!

Tucker u are incredibly lucky to have a dad that cares so much about his kids and has such a huge amount of knowledge!!!

Seeing Tucker smile with his new truck is priceless! I loved the entire build series! She’s a bute!

Now the FORD acronym is actually pretty accurate. 😂 Sorry, I just couldn’t resist.

I think I've smiled about as much as Tucker has during this project. Congratulations, young man, you have a truck worthy of all the pride you can muster and I say truthfully, I'm tickled to pieces for you.

Very truck nice to Father and son working together on a special build truck

That is an awesome truck in every aspect he should be so proud to have such an beautiful truck so young 😊

Hard to add anything to the impressive comments every one has made. Working with your son and teaching him is what all dads should do. The truck is awesome. Made me smile when you pulled out the USA knife to work on that harness. Did Kevin lose his yet? Thank you Clint for sharing this video with us.

This kid better be happy dad! Lol! Turned out awesome!

You guys remind me of Fred and Barney riding that golf cart!

AWSOME JOB TUCKER,DAD AND KEVIN! THAT IS A SWEET TRUCK WITH THAT CUMMINS ENGINE,AT LEAST IT WON'T BE "FOUND ON THE ROAD DEAD"!😂

People have no idea how much knowledge you need to do the stuff you are doing to this truck. And just to be a work on vehicles.

Tucker looking at the welder, notices the settings and then went like "Alright, BRING IT ON!" 😂😁🤟

But does the girlfriend like it? Nice job even for a Ford. The Cummins made it a worthwhile truck. 410 gears are pretty steep out on the highway, the 354's will make it a lot better for long trips. Tucker has some real skills with his welding. Best of luck to him for the future.

Very nice job guys! I like that you make things look like a factory build as much as possible. That truck is way better than anything new you could buy, especially since it was a family effort build that Tucker probably will always remember for a long time judging by the way Tucker keeps giving the cat that ate the canary grin so often. 😁🐱🐦

Tucker with your Dad's experience and your work ethic you've built a one-of-a-kind truck that you can't go and buy and it worked out very nice.

Kevin IS so multi-talented. At 32:57, he doubles as a vise. 👍

He takes pride in that truck that awesome he should be vary proud of it bloody Marry is mint 👌🏼

Another great epic truck build. Tucker the truck is fantastic. Yes, to a video on the gear change. Thanks again Clint. Looking to see videos of the TD25 rebuild.

Great Job guys, now Tucker has best truck in the area.

I'm happy for you, young man I can see you're happy. Please drive careful. Right all man😊

Amazing job Clinton. Thanks for taking the time to video. So much better than real television.

Thats a truck!!! Dont change the look bud! You got a beast of a rig there!

Nice project fellas. Had a 2003 Ram with the Cummins and the 6 speed manual Gen 3. It had 3.73 gears and ran 70mph @ 2000 rpm's. It was OK but I was always looking for another gear. Almost purchased a Michigan Wheel auxiliary transmission in 2007, but did not want to cut out the floor behind the drivers seat to make it fit. Oh well, life goes on.....

I've enjoyed the Cummings truck build with your son. Keep making more.

Truck sounded real good on the opening sequence!

I noticed Tucker has the same shamee I have! Best way to dry off the nooks and crannies of everything.

I find myself turning up the volume every time y’all crank that Cummins. The truck’s awesome!

I actually remember watching Walker Texas Ranger when that happened

I had a great time watching you and your fantastic crew build this COOL truck. I'm always amazed with your knowledge about working out the small details Clint. I love to see you with your sons work on projects together. I also liked the commentaries that Kevin produces during the projects. Thanks for the video everybody.

Bloody Mary is bad ass

Just think, in a couple years they'll be pulling this bed off and making a welding rig out of it when Tucker's welds start making him the big bucks.

Thats one hell of a sweet truck. Money can't buy what's gone into that truck.

A stellar build indeed. Maybe at a later date change out the springs for air bags, but that has headache in its own way. Though having an onboard air compressor and a tank could be right handy.

That is a gorgeous truck You have the best of both worlds of Ford with a Cummings motor.

Sounds like a Cummins. Great engines, but too loud for me. When I ran diesel trucks for towing 5th wheel RVs they were Duramax. Never wanted to be the loudest guy in the campground. To each his own. Thanks for the series.

Can't agree anymore then the comments below: very well done!!!!!!!!!!!!!!!!!!!!!!!!!

8:48 you should make a drive shaft protection cover - so no tall grass or stuff coils around while offroading , he seems the reasonable kind of kid that gonna sink that truck so hard you gonna need a dozer or big tractor to get it out

Thats a stunning truck hope the lad keeps it long enough for the next generation to work on😂

Tucker got hisself a very NICE truck - with family input. i'm jealous.

Not sure that my father would have been so patient and calm as you are with Tucker.

You the man, Clint! 👍🏻 I’m surprised yall don’t have an Arbor Press, awesome for unjoints my friend! But I figure you already know that Clint! 👍🏻 Happy Gilmore! Tap Tap Tap it in story about a hockey player playing golf to pay and get his grandmother’s house back after being taken for delinquent taxes! lol 😂 Rest In Peace, Carl Wethers just passed away! 🙏🏻 But Happy Gilmore was a good and hilarious movie! 🤣😂🤣

Theres one thing sure, that truck can move lol.....nice looking truck though....Tucker DONT wrap it around a tree lol....Stay safe guys and see you on the next one

Good job Tucker!!!!

Well done, very nice rebuild. Truck should last a very long time. Keep shiny side up.

Nice Truck, Tucker you are one lucky Man. Keep your foot out of it

C@C Team excellence work and entertainment as always that's one sweet ride you got there Tucker Kym Adelaide

Clinton Tucker and Kevin awesome build, one of a kind! Thanks for sharing! Kevin

really enjoy this ford rebuild , waiting for the gear change.

From my personal experience with my Duallys, I have had 3.55, 3.73, 4.10, and even 4.56 ratios, and yes I still have them all, with the carriers. The best compromise between Full Pulling and Highway Cruising were the 3.73's. I'm still running them in both of my Duallys. If you are in doubt, just swap the rear gear set first and try it before you are fully committed.

In my 1989 wd250 4x4 I had the getrag 5 speed with 354 gears . In the dodge 4.10 gears when shifting you were either above or below the power band . The 354 worked really well . If not the 3.54 put 3.73 gears .Denis from Santa Rosa CA

It's another one of those things Ford should've done. I like it.

.............G'day, build turned out great. I like it. Cheers from Australia, Malcolm.

Reminds me of the first Ford I had when I was 18 years old, it was a 1953 Ford Crown Vic, it had the big chrome pieces running down the body problem was it was rotted from there down, it had a 3 speed with no shifter but it had a hole in the floor and I was able to shift it by grabbing the arms on the tranny. Oh, the old days.

A great build series! Please - Keep these family videos in the mix with the commercial work.

Great job guys! Very well done 👍 Love how you got the cruise working using parts in your own yard lol😂

Awesome build you guys! That’s one cool truck and sounds good. Clint you should race the bloody mary with your shop truck.

Maannn Tucker!!! First I'm diehard Chevrolet. But that is one awesome truck!!!! 😂

Let’s not forget about the sound system, thank you for your videos really appreciate them.

Hello from Florida. Tucker is a lucky kid.I hope he understands how lucky he is to have a father like Clint. I wish my father would have cared enough to do anything remotely close to that.To everyone involved helping this young man fix that truck great job boys. keep up the great work. Please take good care of that truck young man.

Now that tape measure will break 😅😅😅😅😅 got your back kevin

This reminds me of when we restored out 85 chevy C30 and made it a K30 with 4 speed! it was a major project!!

Awesome you guys arent afraid to show your true colors ....hunting camo!!!!!

Love the truck I would have killed for that when I was young

Tucker a nice finishing touch would a Fummins tag and ceramic coat. AWSOME build!!🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸