I worked as an industrial mechanic for 35 years and have been retired for 18. I can't do much anymore but I enjoy watching you guys repair equipment. I especially enjoy watching your sons work with you. Dangerous work. Stay safe.

I learn when a machine seems to be cursed that it usually is not the machine. It is usually the operator.

Clint, I'm going to give you a little pro tip, you have a diamond in the rough with Mason, he acts like he wants to learn, and I've seen him working alone in the shop, if you train him to do the work like you want it done, and you keep him on, I think you will have a very knowledgeable mechanic and employee

JD dozer wants to be with you and not the loggers You guys treat the dozer much better 😊

Me: ooh, I wonder how they roll up tracks Me: that's some hold my beer forklift control

World class Education at C & C university , you’re lucky man Mason .

It was weird w/out Kevin in the first half of this video. The video felt incomplete. Glad to see him show up as he brings lots of fun to the good content.

Mason glad you always have your safety glasses on. 👋👋

Loggers - the gift that keeps on giving.

Mr. Mason has come a long way in a short amount of time.

Watching you guys repair them busted dozers never gets boring. Wonderful job . I’ve never seen 2 with the same issues. Nice job.👍👍👍

The C&C boys are working in the heat, stay hydrated guys

IT BROKE MY HEART WATCHING CLINT SCRATCH THE NICE CONCRETE APRON ROLLING TRACKS OVER

Like the way Mason helps and learns. Keep it up Mason!😂

I wonder if Mason has ever seen the movie "Cool Hand Luke"? When he was standing in that pit, it reminded me of the movie 😂

Great repair video. Mason impresses me more and more every day. Fine young man.

I reckon you know the reason for the "curse" on this machine Clint - the operator. Driving with flipping great rocks in between the rollers, just as bad in mud and could be worse, hard steering movements and general abuse. A lot of guys get on one of this big boys and think they're INVICIBLE but anyone can break'em - takes a lot of skill to put'em right! Can;t understand why there have been 18k views at the moment and only 4.7k likes - rotten lot!

This is rapidly becoming my favorite you tube channel

You made it look so easy rolling them tracks up great job 👍

Putting antiseize on stuff for the next guy is especially nice especially if it is you.

Retired 80 year old ming heavy equipment mechanic. Was a PM supervisor for yesrs. You didn't bring equipment into the shop for service or repairs without washing. This was the maintenance supervisors orders.

17:00 For broken off bolts that come loose with a chisel, I take a small cut-off wheel and put a small slot in them, then turn them out quickly with a flat blade screwdriver. 🙂

That 750 j likes to stay in the shop because you all treated with love .

Great to see father and son working together on a project. Remember all the former work you did on this machine.

Anything that can go wrong WILL go wrong. Greetings from Dublin Ireland 🇮🇪

Dad said they used spray the tracks with hot road tar in the coal mines. We used powdered graphite on squealing brakes. He said the tar is a lube and keeps mud from freezing to everything in winter.

Always wanted to see how these monsters are fixed. You're channel does that for me. Thanks.

Loving the dozers repair content.

Clint, I really take my hat off to you mate, I know I only see you through the videos you produce, but I really admire and appreciate the way you interact with other folks, you always display great dignity and respect and I think you would be a great bloke to call your mate; most of all though I love the way you are with your boys. My Dad used to beat the shit out of me and I sometimes couldn’t even go to school because of the welts I had on me but you take so much time with your boys, teach them heaps and are a very honest and reliable figure in their lives, it’s just really neat to see the way you blend in the workplace and on other things, well done mate, you’d be a person on my bucket list of people I’d like to meet one day. Take care

That dozer has homesickness for your shop.😅😅😅

Hi C & C Equipment & it's is Randy and i like yours video is Cool & Thanks C& C Equipment & Friends Randy

Kevin’s sound effects are the best

Whoever invented impact wrench is ...... awesome!!!!!

Are the young men that are working with them Ken folk or maybe their boys,, they're getting a definitely a good education, and it seems like they don't mind, you don't see that much in this country anymore young men doing hard work and not crying about it❤

I enjoyed the video as usual Clint. This stuff just never gets old to me. I wish I were younger and had the opportunity your boys and Mason have, you would have had to hog tie me to keep me out of your shop. Just so much to learn.. I know you were taught well and so are your sons to have been afforded a fantastic opportunity.. Keep it up Clint. Tell your Dad Hello.

As a builder who has all the latest leveling lasers and gadgetry I still love that good centuries old fashioned string is still used in big machinery earth moving equipment, building block layout, framing, etc. etc.

Clint, you show the work ethics you were taught and now we see that passed on to your kids and you and your wife have to be proud parents.Also those same ethics you seem to use when picking those that will represent you and your company. Great video and hats off to your hard working kids.

It is striking in how quiet the commentary is in videos when Clint and Kevin aren’t working together.

That seemed like a very fast job replacing them tracks Great job

Nice work as always Clint and Co. Rolling up the old tracks was very interesting. Makes me think that you have done it before.

C&C sure do make great content enjoy watching Thank You

Clints videos are really educational, he should have his own series on mainstream TV. Mind you if I was the production team I'd be a bit concerned about Kevin, especially when he goes into Turkey mode. 😂🤣👍

Had to laugh when you said that this dozer was “cursed”. I worked as a technician in the IT industry from right back in the 70’s when a lot of the kit we worked on was electro-mechanical stuff, and I swore blind that some of the units I worked on were cursed. Or, we called them “Friday afternoon jobs” cause they were put together in the factory in real hurry on Friday afternoon when everyone wanted to knock off early for the weekend 😮😅

They don’t all have to be fancy rocket science dozer videos. I enjoy a good old straight up repair video 😊

Definitely loctite. I use shit load on 850k I run. Never fails. Jd.telling me 33 grand put new upgraded final drive on. Wow.

I really enjoyed this video because I like seeing how fast I can get the job done. You guys are getting er done in a record time. Good job.

Manufacturer: "We are building the most rugged dozers!" Bushy bearded loggers: "Ya think? Here, hold my freshly cut tree!" 😁😁😁

Amazing to see how you roll up those tracks @12:00. Thanks for sharing that! Love the videos and I still get mesmerized watching ya'll work on these monster machines. I am sure it takes alot of effort to blend telling the story of what is happening, while trying to actually get the work part of it done. Thanks for doing what ya'll do!

This was on TRACK to be a great video from the start 🤣🤣

I like that you get right out there with your guys and work right along with them

If it was my dozer that was eating rails on sidehills and rocks I think I might try a set of full-length rock guards and narrower pads. I don’t know if it would suit the owner’s needs or if this machine could be fitted with non-LGP pads. Worth a shot.

I'm no mechanic but I really respect you guys and your abilities, knowledge and professionalism. It's just an awesome channel and really interesting and enjoyable.

Not everyone can brag about having a GT-50. That's even better than the Ford GT-40. I used to work in a Cat dealership in the 1970s. We did not even stock LGP machines in South Texas because of hard and rocky soil. Up the coast in the Houston area, they almost exclusively used LGP tractors. Rice country, very few rocks and unless they were in a drought, almost no hard ground. Loggers using LGP tracked equipment can tear the rails up running over stumps even it the ground is soft.

Awesome video as always Mr. C!!!! Have a blessed weekend my favorite KZfaqrs!!

Ahhh... you guys were just in time....I needed a C&C fix really really bad....😅

Them dozer's come there often. They always leave looking great. And as long as those guys pay good. Its a great relationship!

Tore -up that all new concrete -Brakes my heart

The way you wound those old tracks up is nifty.

I’d love to see a video showing how the logging guys use these dozers. They certainly beat the hell out of them!

Clint, sometimes when your faced with strange issues like those tracks; you have to show up to their jobsite uninvited and just observe them operating the equipment. I work for a Stihl dealer and they had a DNR branch that was having constant problems with the carburetors on just their saws. So the regional technical advisor drove all the way to their jobsite and watched them work all day. What he discovered was these guys would file the chain on their saw and then proceed to CLEAN THE FILE IN THE FUEL CAN that they used to fuel up their saws! Warranty void immediately! People do strange shit and sometimes you never know until you see it first hand.

Thanks for sharing your thoughts, ideas and videos. Another interesting and entertaining video, great job. I think one of the things I like best about your videos is seeing the path not traveled. My dad learned diesel repair while working on the construction of ALCAN highway. He lost his fortune as a dirt work and concrete contractor for various reasons and was working on going back to his roots to establish a diesel shop similar to yours. He was paying the bills as a barge Captain out of NYC that eventually took his life when I was seven years old. Some of my earliest memories with him was as a tool gofer after kindergarten half days. I sometimes wonder what pathways I would have taken if he hadn’t been removed from influencing my life at such an early age. I find great entertainment watching C&C and Dirt Perfect videos, two of the paths I likely could of traveled down. As is of all things I retired after 32 years as a Senior Power System Operator. I like to think the skills I picked up in the earliest years of my life as his gofer helped my position as much of my work involved talking with people in the field doing maintenance on mega machines in the field coordinating and authorizing the required repairs and operations. About half of my job involved receiving phone calls from coworkers in the field I had never met, in locations I had never been, requesting to do work I had never done, and I was responsible to understand what they wanted to do, determine if it could be safely performed, and coordinate it with my counterparts at other companies that the work could impact, and take responsibility if something went wrong. Wishing you and your family the best.

GOOD JOB BOYZ!

My husband found this channel and is really enjoying it! I am his internet driver and hoping for him to win the toolbox giveaway!

I bet you are glad that Dozer is done!!! Thanks for sharing 👍

Your knowledge of equipment is unequalled! I love the work ethic of this business and I know it started at least with your dad if not further back. Keep these videos coming! I enjoy them so much and the connection that you have with your sons and employees!

I love new chains and good rollers. They’re so quiet and tight. Sadly that dozer won’t stay quiet for long lol.

You mean it's not warranty when I drive the wide tracks over rocks to break them up.🙄 Friday - track night. Fun & smiles. Thanks

Tucker lays a nice weld with that mig welder love to watch him weld!!!

Loggers are a separate breed. We did away with loggjng crew. Farmed it all out. Another mill lost 2 guys in 2 years. Skidder driver and a cutter.not a job for sissies. The bunch doing it now have a big. Truck mounted chipper. Take tops etc chipped up to hawville KY . MAKE CHIP BOARD. Customers like having tops out of the woods. A cutter can drop 80 trees a day. In a good woods. With one guy trimming and bucking up lengths. They abuse skidders. But it goes with the job. Getting big logs out of bottom of a hollow. We had an old Mack log truck. They are tough old trucks.

Great job! I really enjoy, watching your videos!

Thank you so much for walking through undercarriage 😊❤😊 your little pointers Are great advice 😊 the welding on ends of sprockets was fantastic for a very solid connection 😊

Clint…aint you heard ‘bout them new-fangled left hand drill bits for broken bolts? 🤣🤣🤣🤣

Antiseize Saves the Day! That poor machine goes through so much torture. Another fine video.🤙

I was honestly facinated by the method of rolling up those used tracks! I'v seen tracks rolled up but now i know how its done. thank you

Those old tracks make GREAT road drags, we use our old Tigercat 822 Feller Buncher tracks to make road drags with for the logging roads!! Flip the track on it's side, use a piece of 4×4 1/2" wall square tube in-between the ends of the rails, and 30' of 1/2" grade 80 chain with a master link to pull it with.

Kevin with his "Little Boy" pants reminds me of Angus Young from AC/DC !!! 😂🎯👍

Mason and your sons are going to be great mechanics you Clint have taught them well!!!!!

You amaze me,,, your knowledge is unmatched and your work ethic 🇺🇸🇨🇱

Thanks for the video, enjoyed watching. You must be taking really good care of the logging company, they just keep bringing the ole 700 in for repairs, of course after watching your channel for a long period of time, that is par for the course for C&C Equipment, just sayin.

Mason is a good hard worker! Hard to find young men like him!

Clinton Kevin Hunter Mason and Tucker great job, you guys sure make it look easy! Thanks for sharing! Kevin

Fine looking job, I've put a lot of tracks on in my day. Those alligator connectors are a life saver I have knocked a lot of Master pins out.

Good job Clint and crew, thanks for sharing brother! Louisiana sending prayers and positive energy to you, your crew and your families!🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻💯💯💯

Your green pneumatic impact gun is probably capable of doing 1200-1500 ft lbs of torque. My 3/8 ingersoll rand cordless impact is capable of 365 ft lb of torque which is still higher than the torque spec. People wonder why they always have problems with removing seized bolts or broken bolts and it is often caused by over torque and stretching of the bolt.

Great video you explaining what to look out for in the rails ,rollers ,sprockets etc....Also seeing the work getting done...very interesting....Stay safe and see you on the next one

Yes asking a lot .lpg tracks on rocks stumps . Work for you guy's .👍

Nice job👍 Even installing the tracks the right way... that's even with their eyes closed.

I hope we’re getting a video of the ex army dozer that you fixed the engine on getting those bugs removed 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🏻

its impressive how fast they wore that uc out! excellent work there fellas!!

2:47 keep the trackpads , its good material for reinforcing excavator buckets or boom - also good for side cutters on dozer blades and trackloader shovels

You and your crew are always impressive. I thought of you all last week as I was struggling with a simple air filter! I got it! Those fork lifts are an integral part of your shop. Another great repair. Thanks

Great video. Mason is a great young man to have in your shop. Super work ethic. Good to see you are locating equipment that is great for your resale buisness.

Almost hurts to see the grueling track work. My hat is off to you guys. I do think I have spotted an issue with the track guide and an explanation of why it came loose. The underside bolts had a lock washer but no flat washer. Our conveyors had large (2-3 inch shafts) Pillow Block bearings with the slot surface exactly like that which kept rattling loose. What I finally found in a Bowman fastener book was the recommendation to just use high grade flat washers and high grade bolts (8 or 8+). I convinced our conveyor mechanic to try it on the big slot bearings. Never had one come loose again. He eventually replaced every fastener which amounted to hundreds of fasteners in the 25 some belt conveyor system with that setup (4 ft wide conveyors some 200 feet long). The back slots look the same but did not see what was placed in there. We would use multiple washers for rigidity if the slot was wider than the bolt.

Mason is a very motivated worker

As always, a great little video. Learn something new everyday. Thanks guys!👍👍🙂🇨🇦

I enjoy your videos and the mundane maintenance is still interesting. You have been able to buy and resell some great machines.

I wonder how many hours of try and fail it took to figure out the right way to those tracks back on.!? Aaaand coil up the old ones..master class !!

The way the loggers are she will be back 😎🇺🇸 NY

I love these types of videos. Thx Guys!

Amazed @ how well your concrete withstands the heavy duty wear it endures. Wow!