The joy on this man’s face is what it’s all about

You should be proud,you build some awesome cars.

I love your black pooch with his or her' built-in feather duster. 😍 My guess is that he or she doesn't shed? I love chrome, but glad you went with a Satin Finish on the Radiator Shroud. 👍 I would have gone with the Satin finish on the driveshaft as well, but that's a personal choice and your silver looks just fine. So, when all is said and done, no runs, no drips, no errors. Well done! 👍 You're obviously in the home stretch with the Camaro and pretty much done with the Caddy and I'll bet your wheels are already spinning as to what your next project will be. You can tell us, none of us will kiss and tell. 😉 Bringing the Camaro out into the daylight, boy does it look sooooo good! 👍

Chris, that Camaro is sick, way to go on the build man, very impressive!!!!

Only just started watching your channel and I'm definitely enjoying the content. The excitement on your face during the test drive is something I can't wait to have again. I'm very happy for you!

Chris the talent you have for working on cars is amazing, you’ve got to own or work for a performance shop to know all of this.. at least that’s what I think.

Invest in some subframe connectors…..best thing I ever did for my LSA nova along with upgrading sway bars……the first gen f body is the same as ‘68/‘74 x body…..you will notice a much stiffer launch and the car will be more nimble considering it’s a 50 yr old vehicle

Congratulations on the milestone!🎉 Looking and sounding great. 👍

Have a 69 with a 307 almost bought your 307. I want to do an LS swap now thanks for documenting your journey. I can follow what you have done

What a talented guy!!! we need to like his vidéos and share it with some friends!!! Awesome Channel!!!

Mad skills! loooove that vet.

Good job man. If that was me, my wife would’ve come out and said "yu need to check the spark plugs, it’s idling horribly",,,LOL

Only been watching you a few weeks and have yet to be disappointed. Keep it up!

Can't tell you how much your videos motivates me...having 2 little kids though, I can't do a lot of car stuff at the moment haha

Seen 2 videos and am hooked. Got into cars only about 2 years ago, had a 350z for a bit and sold it before I got stationed in japan. Can't wait to get my hands on a JDM classic and "Americanize" it with a V8. Only have basic knowledge on how to work on cars but I can already tell by watching your videos that it isn't rocket science, and that I can learn a lot. Definitely got some sick cars man, keep it up

Chris, Definitely enjoying your channel, and the attention to detail that goes into your work!!

Awesome! So exciting to see it come together.... I'm probably a year away from this moment on my 68.

Great work man!! Love it keep the great content coming!!

Nothing like American muscle! 😍🎶

Great job! Seeing it under it's own power SWEET!

My favourite out of all them, especially when it sounds, looks that good. 👏👏👏🇬🇧

Makes me miss my lq9 swapped 71 😔 Great work on that car man

Congrats Chris! Looks really nice

Been very impressed by your skills and subscribe to you a week ago. Keep up with the great content!

Ah man, that sound! I've watched the whole Camaro series (your vid about replacing head bolts on the M156 is what got me to your channel). Awesome stuff, keep going!

drive shaft folks did a great job..also, noticed wilwood..nice..

Sounds awesome, good work 👌

Yeah Baby!!!

Looks good. I hate to be "that guy" but From experience I would recommend running the green antifreeze. Dex-Cool tends to "gunk" up in the passage ways after bout 20-30k miles and its a pain to clean out.

Excellent achievement bro!!

I working on my 69’ Camaro as well reason for all the questions 😆. My car is at the body shop 🤞🏽can’t wait to ware that smile from ear to ear…

Great job I’m still working on mine, got to make a list

great job, I'm fighting a Camaro right now. she's miss firing on 2 cylinders.

Inspires me to go to phase 3 on my 68, which is the LS swap. Nice ride Man!

Awesome Job Chris! Sounds rediculous! But that’s a good thing lol , sounds great!!!

I admire your work and love your videos. I how to see these cars in person one day.

sounds incredible 😮‍💨

Looks and sounds unbelievably good. :)

Man I love the car but dammnnn I'm jealous of your shop. Very clean and well equipped bruh.. Great job on the Camaro build. Motor Trend TV needs to pay you a visit.

Sounds Rowdy. ❤

very clean

And manual too 🎉

Beautiful job…..like usual

I'm watching all your videos per car from when you get said car and as you go through it and make it in to what your vision which your vision for these cars is spot on man . Come to Husker land out west and help me put your input on my 2001 Camaro SS please 🤘 JK

Great content 😎

congrats man

That’s so awesome. 💪🏽💪🏽💪🏽

This build is truly badass. My dream has always been to throw a Gen 3 hemi + a TR6060 into a ‘68 Charger!

So sick!! And sounds nasty 🤘🏼

Sweet!

😎 You earned a new sub.

Beautiful…🎉

Congrats! looks like a big abandoned house down the road with a four car garage!

Hell yea brother 🤜🏻🤛🏻🤘🏻🤘🏻

Man you and mike myke need a collab that would be sick

If you dont have the original engine the Ls3 is the next best engine.

I’m a bit confused map sensor before the throttle plate and the steam ports going to the transmission cooler part of the radiator. Sounds sweet thou

Chris, just started watching some of your vids! You do an awesome job and keep me very interested in what you have going on. Subscribed. Keep it up. Vids are awesome! John from S.Florida.

Bruh!!! Did your parking lights just come on when you hit the brakes going into the garage? Dude, that car is soooooo awesome!!!! Love the channel by the way. Definitely not being an a-hole or anything, I just noticed the light thing is all and you may want to check it out. I have been working on helicopter wiring for over 20 years so I can't help but notice the electrical stuff. It's a curse. lol. Again, great channel and great work with everything and looking forward to more videos sir!

I give it less than a year and you’ll be supercharger shopping…..put 18” of pipe after that oxygen sensor to save your eyes from burning

Nice shop

That fan is pretty but I suggest using a spal h/o puller fan……just wait till summer then you’ll understand

Looks great sounds even better ! Where do you get the green wrap you use ?

Hello Chris, great work you inspire me. I am currently trying to do the same thing to my 1969. Question and hope you can help, where do you suggest getting an LS3 from? Where did you get your radiator from? What exhaust do you have for it? Sounds great!

Looks good. The louvers in the fan shroud look like they should go horizontal and not vertical.

Love your videos man. I know you aren’t sponsored by the parts but I want to do the same intake on my 68 camaro with a 454. Any recommendations on where to look for intake tube? Hoping to find a good chrome tube to mirror your setup

Bad ass man

I got a LS3 camaro as well, but yours sounds way more aggressive

Your dog’s tail is so gay! Hilarious- thanks for the knowledge and recording your journey- it’s very motivational! Keep up the good work👍

Nice car! It really needs to be lowered an inch to an inch & half in the front and maybe 2 inches in the rear. It really does sit way high off the wheels… lower it !!! Give it a great stance. !!!

Man I’m excited to lol…She sounds sick bro! Nice work. Did you run a mini tub? How big of a cam did you go with and what exhaust you going with?

Looks like it coulda used an lsa zl1 supercharger..

💪🏿💪🏿💪🏿👏🏿👏🏿👏🏿

Chop chop

chop chop chop

Such an awesome car, sounds good. Whats the story on the spot you drove to? Looks like its been abandoned for quite a while but a pretty sweet place. Big garage.

👍👍💪💪💪

Hey Chris, what is the brand of the green plastic you use to protect your paint? Great videos man!

Are you turning the rear o2 off and installing an up stream o2 when you do the exhaust

What rear wheel setup is that rim size backspace and tire size? Looks good! Is it stock wheeltubs

Beautiful car man can you please tell me the rim and tire size because I need them for my 67

Fucking bad ass bro 🤟🏼

Chris what are the black wheels you currently have in the Camaro?

Chris, is that “abandoned” house with the 3 car garage for sale?? I totally want to be your neighbor 😂

Ok so I just subscribed and plan on going back through all vids like your content. I am in need of a lift in my garage and I see your garage seems to be as tall as mine so I’m limited on height of course so with that said anyway you could maybe point me in the right direction on a lift like yours please ?

Dude nice video.. Is your favorite colors black ad blue.. your vette is black with blue calipers and your dog is black with a blue collar..just saying LOL

Question since you’re running I’ll assume the terminator x MAXX because it is drive by wire you don’t need to use the MAP sensor? Right

She ready for the street man.

I missed the part if u said . What trans do you have if its a T56 did the trans tunnel have to be modified.

i got a 2013 cadillac ats 2.5l fixed the oxygen sensors mass air flow sensor map sensor it says it’s the computer and in the scanner it said ecm bought the computer didn’t let the new computer program and with the old computer it says the key isn’t programmed it starts and turns off any advice

Fuck yes!!!! amazing! now question.....my front amber lights go on when i press the brakes too. What gives?

What 2 post lift is that?

No the one from goonsxwad was from copart

Anyone know where I can get that plastic wrap on the front of the 69?

Nice ear muffs

Chrome won't get you home.. especially when it's just shiny chrome paint on plastic.

Oof

that's manifold absolute PRESSURE not temperature bud

Nice car sounds incredible

I tried putting one of those passenger side valve covers with that short filler neck. It wouldn't work on ls3 head because different rocker arm location. Are you using cathedral port heads ?