After a complete drivetrain install, this evening was my first start of the 572 Hemi. A few issues as always on a first start but very exciting.
Пікірлер: 76
@stevenmoreau2563 жыл бұрын
Love how it shakes the camera! HP!
@EmmittMAKNHP3 жыл бұрын
Thanks for the comment! It was amazing to hear for the first time.
@dominicjohnson17553 жыл бұрын
Awesome Big Bro, you almost at the finish line!!!!!! Another one in the books!!
@dr.moparm.d.65282 жыл бұрын
Looks like a super clean setup. Kudos for showing all the cranking, I know all about first start hiccups, that's part of the game.
@EmmittMAKNHP2 жыл бұрын
Thanks for watching! I wanted to show the true actual first start. On my Cobra build, the first start was a disaster. :)
@TheBlackScatPack Жыл бұрын
Music to my ears
@EmmittMAKNHP Жыл бұрын
Thanks for watching!
@sirswerve24933 жыл бұрын
Firing up the King!
@jefftaylor12473 жыл бұрын
An absolute thing of beauty!!
@rogerradcliffe73673 жыл бұрын
Finally…it’s the same sound as when a newborn gets that slap on the azzz💥👍🏾🙌🏾
@EmmittMAKNHP3 жыл бұрын
Thanks Rog!! I couldn't wait to hear it!
@danielsacks7152Ай бұрын
Sounds awesome! I learned the hard way to always start a new engine with mufflers on it. Or, if you can't, invest a few bucks in one of those stethoscopes with a probe and go all around it. (Good idea anyway) I had an engine with a flat hydraulic lifter that I never heard because of it. The noise can mask other sounds, too. Also, either have an oil pressure gauge where you can see it, or better yet, you be with the engine running the throttle, making adjustments and watching for leaks, etc. While someone else is inside watching gauges and can be in control in case that sucker is in gear or needs shut off in a hurry. I protect all of mine with a simple oil pressure shut off switch set to 30 psi or so. You hold a bypass button to start it until it gets pressure. You can put in a temp operated idiot light also. Small price for insurance on your investment! Good to see you not standing in front of it. Torque Converters drain down and stall convertors can jump if you hit the throttle. I don't trust newly installed shift linkages or neutral start switches. Learned that the hard way too! A good race trans can move the car in neutral from friction, and with 4.10s you probably cant hold it back by pushing on it. If the transmission is rebuilt or reprogrammed you need it in neutral to fill and oil the torqueflite but have no idea wat it will do the first time it gets pressure! Cool car, it is one of my favorites. The best smell in the world is hot paint and burning fingerprints on a new engine!
@EmmittMAKNHPАй бұрын
Thanks for watching! This has been my favorite build and has provided endless enjoyment so far.
@claiborneeastjr41294 ай бұрын
Awesome HEMI
@EmmittMAKNHP4 ай бұрын
Thank you for watching!
@duanedahljr16693 жыл бұрын
Awesome bro!!! Sounds like it should!....working on a 528 of my own, using Bullet cams solid roller, hope it Sounds at least that good!
@EmmittMAKNHP3 жыл бұрын
I'm sure it will! It's amazing in person.
@bdog38699 ай бұрын
Love it!!! Keep it up😊
@EmmittMAKNHP9 ай бұрын
Thanks for watching!
@bdog38699 ай бұрын
We definitely need an update for sure!!!
@JAWSatBCPerformance2 жыл бұрын
Oh that gave me chicken skin!! I love first starts!! Well done Aloha!
@lindenjohnson15152 жыл бұрын
ssoo nice to see - Grettings from Cold n Snowy Canada bro!
@EmmittMAKNHP2 жыл бұрын
Thanks for watching and greetings to you as well from your southern neighbor (Michigan)
@BIGGELATO Жыл бұрын
When you tried starting it and looked for a way to blip the throttle to give it that extra juice, and then tried to run up to it to blip it, I was here celebrating YEAHHH!!! WOOO!!!!! LETS GOO!!! 😂😂😂 yeeessiiiir!!!!
@EmmittMAKNHP Жыл бұрын
Thanks for watching! That was a high moment for me as well. Still loving this car and the build memories as well.
@GLF4262 жыл бұрын
Stick you a little push button on the firewall wired to the ignition. It'll change your life. It's great for Adjusting valves too
@EmmittMAKNHP2 жыл бұрын
Clear on that and thanks!
@GLF4262 жыл бұрын
@@EmmittMAKNHP looking good bro. Sounds great
@Fmandan772 жыл бұрын
I love how the video goes blurry when the Hemi comes to life! That's what your visions gonna do at WOT going down the track!
@EmmittMAKNHP2 жыл бұрын
I certainly hope so!! Really enjoying this so far. Thanks for watching.
@MOPARDIVA Жыл бұрын
My dream block!!
@EmmittMAKNHP Жыл бұрын
I love it! Had it out all summer and totally enjoyed it. Indy Cylinder Head does excellent work.
@billbone43883 жыл бұрын
That's a beast👍
@missourimike51502 жыл бұрын
That's a fire breathing dragon! Sounds good!
@EmmittMAKNHP2 жыл бұрын
Much appreciated and thanks for watching!
@Telemarketer315 Жыл бұрын
Plot twist, the camera is perfectly still that’s the whole garage shaking
@EmmittMAKNHP Жыл бұрын
Thanks for watching.
@Bryce6213 жыл бұрын
🔥🔥🔥🔥🔥🔥
@douglascooper19872 жыл бұрын
It's got a HEMMEEEEEE!!👍👍👍
@williamfitts3893 Жыл бұрын
I agree
@frankbob4043 Жыл бұрын
That sound is beautiful! I think yer flux capacitor might not be firing correctly, you get that fixed and you'll be able to hit 88 mph!
@EmmittMAKNHP Жыл бұрын
That was so much fun, getting that thing running. It has tons off fun miles on it and it running fine. I got it up to 87 MPH the other day, working on 88😀😀
@frankbob4043 Жыл бұрын
@@EmmittMAKNHP That is awesome! Looking forward to that vid of you hitting 88!
@donhathaway32342 жыл бұрын
WOW
@MOPARBABEH Жыл бұрын
Bro it was shaking the entire building
@EmmittMAKNHP Жыл бұрын
That was a massive moment for me with this project. Still loving it! Thanks for watching.
@sonandsanford49632 жыл бұрын
Lol... great visual effects.
@clivewalker54652 жыл бұрын
It appeared , that when that Hemi Woke , the Whole World Shook .
@EmmittMAKNHP2 жыл бұрын
It really did! Loving this thing. Thanks for watching.
@dh23602 жыл бұрын
Shake and bake, Hemi engines are awesome!
@EmmittMAKNHP2 жыл бұрын
I agree!! Thanks for watching😀
@kennieb56062 жыл бұрын
NEVER WERE THAT EVEN WHEN NEW ALL BS
@patriotcanuck64852 жыл бұрын
Beautiful!
@EmmittMAKNHP2 жыл бұрын
Appreciate that and thanks so much for watching.
@tomcrosby63322 жыл бұрын
Insane
@GimmeDaBacon Жыл бұрын
Yeah, its just the daily.
@forclosedify2 жыл бұрын
Vroom!!!!!!!
@truthray28852 ай бұрын
Is that engine sold as a single Mopar after market part #? I've seen those around, and they are....awesome.
@EmmittMAKNHPАй бұрын
Thanks! Custom build by Indy Cylinder Head.
@haroldbirge68815 күн бұрын
🏆🍀👀✌️
@geralddrury48293 жыл бұрын
That was good to hear! Why was the Camera shaking so bad and the DTV remote never left the cowl?
@EmmittMAKNHP3 жыл бұрын
That’s a good question 😀 - Horsepower vibrations maybe😀😀
@alexsava77312 жыл бұрын
From pure curiosity. What is the mpg for this monster? 💀🥴
@EmmittMAKNHP2 жыл бұрын
Thanks for watching Alex! Can't say for sure what the MPG is but I will say it's not good (my guess would be 8 MPG). I promise you this, I"m smiling from gas station to gas station. Be cool.
@alexandrusava162 жыл бұрын
@@EmmittMAKNHP 💀⛽ But it s worth all money... Start it up and scare the sh't out of this supercar owner. Congrats for the car. Keep it up 🙏🙌
@Fmandan772 жыл бұрын
Freaking Awesome! Which Block? BMP, KB, INDY...
@EmmittMAKNHP2 жыл бұрын
Aluminum Indy Maxx - thanks for watching!
@mopar922 жыл бұрын
Cam break in?
@EmmittMAKNHP2 жыл бұрын
Yep - no problems with the cam.
@jerimahjohnson86982 жыл бұрын
I got a63 Polara in my garage want a crate hemi too