First T-Motor F7 Stack // First Hand Look & Setup Guide

Рет қаралды 39,024

4 жыл бұрын

T-motor F7 Stack: bit.ly/327NdPW
Consider Following me and supporting on Patreon.
/ dronemesh
----------------------------------------------------------
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
Need Help with something?
dronemeshforum.com
Make sure to sign up to the newsletter and create an account to not miss big insane sales.
shopdronemesh.com
Android APP
play.google.com/store/apps/de...
IOS APP
itunes.apple.com/us/app/drone...
Follow me on Facebook
/ dronemesh
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmastering.com
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398

Пікірлер: 78

@DroneMesh 4 жыл бұрын

T-motor F7 Stack: bit.ly/327NdPW

@ervc4364 4 жыл бұрын

Drone Mesh not sure whea to start

@MrNams 2 жыл бұрын

Is iNavFlight-inav install-able on it?

@mattunwin4254 4 жыл бұрын

Awesome review man, subbed. Thanks for going into detail with the wiring, You did a great job explaining how everything goes together, your vid helped me a lot!

@WaynerNC29 4 жыл бұрын

I just built my first 5in with the 45a V2 version 2 weeks ago. Absolutely floored with the quality. I updated to BF 4.1 and haven't had to touch nothing since setup. It has proven tough peaking at 54 amps several times with the Xing Camo 2306 2450kv. Being a newer pilot, it has survived some rough crashes. Highly recommend it. Worth the money.

@starman5565 4 жыл бұрын

Same new pilot so I will get that 👍

@Miner3dBurns 4 жыл бұрын

Great video, really helped with my first build, thank you

@neilfpv 4 жыл бұрын

That exactly looks like my Spedix 4in1 esc! That flight controller is beautiful! It comes with tons of other parts too which is awesome! The print on the pcb is great! It can easily be read unlike the HyperLite F4 OSD I bought before.

@ShiningStarMediaProductions 10 ай бұрын

Just purchased this for a 5.5 setup. very excited!

@ampere400 3 жыл бұрын

For anyone who is confused about how to set up TBS Smartaudio: Put the reciever to Uart 5 and the channel 4 cabel to RX3. This way your Crossfire will talk to the VTX

@lokaero Жыл бұрын

Hi. just want to know can i connect my vtx smart audio to TX3 port on this FC and carry on?

@abnormallynormal8823 3 жыл бұрын

Thank you so much dude. I was pulling my hair out trying to figure out why my vtx wasn’t getting power. The manual sucks lol. This was the wrong FC choice for my first build lol

@zoltangremsperger5361 4 жыл бұрын

Good combo if not the best. You should make a vid about how to setup pitmode ;)

@MCsCreations 4 жыл бұрын

Fantastic review, Sam!!! 😃 The stack looks awesome! And if it's T-Motor... Right? 😃

@jayboyfpv2333 3 жыл бұрын

thank you so much for this had no idea why i couldn't get my vtx to output! haha now i know need to solder that jumper pad on bottom for always on / pit mode was sure what that one was for.

@elvandor47 4 жыл бұрын

can you setup esc amp draw with this stack mine seems way off not sure if i did something wrong

@explorenorthwesternmichiga2308 4 жыл бұрын

Do you have the beta flight setup for this yet?

@bluejfpv7876 4 жыл бұрын

Is this usable with dji plugnplay air unit?

@BBSlats 4 жыл бұрын

Would this fit in a 15mm build or is this stack too tall

@TeamOfTheRing 4 жыл бұрын

Hey man, as always great video ;D Can you test GepRC stack or esc alone? geprc g50a, those boards look so clean ;D

@bluejfpv7876 4 жыл бұрын

Can you blackbox log this?

@godsun358 4 жыл бұрын

Show set up and flight bro. I like it

@traxxi2003 3 жыл бұрын

Can this be loaded with INAV?

@skyrotfpv 4 жыл бұрын

I use this F722 Stack with the F55 ECS from T-Motor on four of my quads (2x 4S and 2x 6S). I am absolutely happy with them and have never had any issues so far. Previously, I've used the also pretty new Diatone Mamba F722S Stack and I had 'de-syncs' on like every 4-6 flights. Tried everything with Firmware, BLHeli de-mag settings, idle values, different motors, etc.. nothing helped and it was a real pain. This T-Motor Stacks is rock solid and I can also highly recommend it. It is pretty expensive though. What I've also realized is that some boxes come with racewires and some with plastic clips to hold down the motor wires, so there is inconsitancy in what is inclueded, eventhough they wer all brand new and factory sealed. As I don't use race wires, I don't care that much. :)

@Brokewokejoke 3 жыл бұрын

My esc is not reading my motor number 2 and its new so can it be that I have the esc and fc connector on backwards?

@PatrickGuerrisi 2 жыл бұрын

Hi I got this esc ... Do you think it's too risky to take off the heat sink on this t motor ESC to put conformal coating and to reglue?

@bpwarrior1 3 жыл бұрын

What uart is CC (camera control) pad?

@dominikamrein8022 4 жыл бұрын

I've a question regarding the F7 camera_control: In betaflight cli is "resource CAMERA_CONTROL 1 NONE" out of the box. Which pin do I need to assign to get CC working?

@francotriba963 7 ай бұрын

Hola. Es compatible con dji o3?

@andrelam-5235 3 жыл бұрын

what is the benefit if i don't use the stock capacitor? because i'll change the stock capacitor with rubycon 50v 1000uF one

@propsoff 4 жыл бұрын

I have the ESC connected to the Mamba F722 Flight Controller. Amp reading is 86amps on the bench... Hum...🤔

@josephrsalexander4589 4 жыл бұрын

I have a buddy using this ESC on a 10 inch quad. 180 amp punch on 6S. Very solid ESC.

@AndrewBlanche 4 жыл бұрын

It’s a 55a ESC it would not have a peak punch of 180amps. Come now

@SweetStat 4 жыл бұрын

@@AndrewBlanche 55x4=220

@Toth_Marton Жыл бұрын

I was pulling almost 220A, took it like nothing. It is a robust ESC.

@lokaero Жыл бұрын

Have you tested that those cam and vtx bridging ports output actual voltage? in website they have mentioned no actual voltage output.

@29jvskate 2 жыл бұрын

does this fc have betaflight osd?

@lenasclifos1027 3 жыл бұрын

Hi there, Is my fist time making my own drone, and I bought this components for it. I was wondering if you could you tell me the total height ones you have it mounted?. I am not sure which H standoffs should I buy, for me looks like 5mm would be okey. Could you help me with that? Thank you I really appreciate it!

@duelz9366 2 жыл бұрын

My vtx and camera are getting no power. I have bridged both pads to 5V correctly. I’ve checked all cables and wires. I’m not too sure what to do. Any help is appreciated :)

@AndrewBlanche 4 жыл бұрын

Diatone has plate too

@RosscoStixFpV 4 жыл бұрын

Not big on 4 in 1 escs .. but that stack looks very tempting 👍

@godsun358 4 жыл бұрын

Mine are coming lite 7inch build

@ArchmageAU 4 жыл бұрын

Good review. Looks like a really good FC. I'd use R1 for receiver and T5 for telemetry for FrSky SBUS. R1 for FrSky Fport. R1/T1 for crossfire. R1 for Spektrum or iBus. T2 (runcam) or CC for camera control. If using GPS rescue, then T2 for that instead of runcam control. T3 for VTX control R4 for ESC telemetry M5 and M6 can be remapped for softserial for non-chatty UART applications. (like if wanting runcam UART cam control AND GPS AND FrSky SBus and Telemetry - put UART cam control on softserial) Also if you wire VTX straight to vbat or 5v pad without bridging you lose the possibility of pit mode (as it switches + voltage, not ground). Like the Tmotor products. Very high quality. Likely to use this stack on 6S race builds in the future.

@jamestavernier8222 4 жыл бұрын

Cam control not working with this board, i wired up a jb runcam the same way i did on my last build that had a similar pinout. Any ideas?

@ArchmageAU 4 жыл бұрын

@@jamestavernier8222 I will assume use are using the CC pin on the T-Motor F722 board connected to the analog cam control pin on the camera. No resistor or pull up capacitor required. Configure via the instructions at: github.com/betaflight/betaflight/wiki/FPV-Camera-Control-(Joystick-Emulation) For particular cameras you may need to look for settings in the RC Groups compatibility thread: www.rcgroups.com/forums/showthread.php?2961216-Betaflight-Camera-Control-Compatibility-Reports Make sure that the same camera voltage is in use (5v or vbat). UART camera control is a different story.

@Bacon-ol3yr 4 жыл бұрын

Don't you mean T1 for Frsky Fport?

@ArchmageAU 4 жыл бұрын

@@Bacon-ol3yr If running Fport, yes put that on T1. My mistake in original comment. Fport runs on a T port instead of an R port as it is bi-directional based off FrSky telemetry. Great alternative if you lift an R pad or burn an R trace. Pain to get going on an F4 board, but fine on an F7 (and you get RSSI for free, no extra channel). From memory, Fport latency was measured to be almost the same as SBUS.

@cmorillo 4 жыл бұрын

Is the escs suppose to light up solid red? Also i notice a light buzz coming from the escs

@MarztechRacing 2 жыл бұрын

hey same for me, how you fixed this?

@vladimircerovic 2 жыл бұрын

Thanks for the amazing content! I just bought this fc and rush fpv solo vtx. I put one solder blob to two pads (bat and middle one, below vtx pads) to choose battery voltage. I soldered wires for dc in, gnd, video and smart audio to 4 top pads. But I get no power to vtx. Did I do something wrong? Or I should remove solder blob that bridges two pads below, for battery or 5v selection, and just put red wire to bat pad, without any bridging? Im worried I did something wrong. Plugged in with smoke stopper, reported everything ok, but no leds on vtx. I didnt touch those three pads for VTX on or pit at the back side of fc.

@duelz9366 2 жыл бұрын

I'm having the exact same issue

@29jvskate 2 жыл бұрын

In the video, he says you can solder directly to bat or 5v for the vtx. And on the back you have to choose either on or pit

@vladimircerovic 2 жыл бұрын

@@29jvskate Thank you John. But this fc indeed has 10v pads. But now power in them.

@Maorifpv 4 жыл бұрын

My vtx not getting any power, i bridged the pit mode pad and 5v pad. Any idea ?

@tonyd1351 4 жыл бұрын

were you ever able to figure this out? I am having the same issue... Pitmode bridged to "on," cam bridged to "5V," and Vtx bridged to "bat," no power from + pad or the bat pad...

@GalaxystarNo1 4 жыл бұрын

Can I use this with a Flysky Nirvana? Can I connect the Flysky Receiver to that stack?

@SweetStat 4 жыл бұрын

Yes ofc

@arisazumi Жыл бұрын

can use wifi?

@marlin-fpv 4 жыл бұрын

Crazy price tag for the FC

@personalJimmy 4 жыл бұрын

Question can you use this FC with the DJI system FPv ?

@personalJimmy 4 жыл бұрын

@@streetdreamz8056 do you have a tutorial how can use this FC with DJI system FPV?

@lebartpix 4 жыл бұрын

Jimmy Paul Cerna Belleza yes , you can use it!!! Just solder the qires into fc. Super simple!

@mikkoolphvlog4152 4 жыл бұрын

Can you please do BrainFPV Radix next?

@cenabitednbfpv587 4 жыл бұрын

Second that

@dreamawayyourpain 4 жыл бұрын

Can I go with 4S with this or only 6S?

@Miner3dBurns 3 жыл бұрын

I run 4s with this setup no worries

@CGKFPV 4 жыл бұрын

ahhh 13:00 so crucial! lol

@christiantribbeck4788 4 жыл бұрын

I'm currently installing that esc as we speak and blheli32 configurator won't recognise motor 4 literally nothing I do will make it spin

@DroneMesh 4 жыл бұрын

How is the esc connected to the FC?

@pacificnorthwestpilots6050 4 жыл бұрын

Are you on dshot through betaflight? You might have it set on oneshot for some reason.

@cleptoXx 4 жыл бұрын

am i intox... or is ur cam mount pumping ? :)

@pacificnorthwestpilots6050 4 жыл бұрын

$120?....wow!

@kyles4010 2 жыл бұрын

So many of these setup guides don't actually show setup or programming...

@marinehm 4 жыл бұрын

Their 1st ever F7? I could swear you were saying THE 1st ever F7 Flight controller. This was a great video, but, I'm going to stick with Matek F7s.

@DroneMesh 4 жыл бұрын

First ever T-Motor F7 correction.