No video
Learning From My Mistakes // Building A Better Breadbox
Рет қаралды 8,511
Күн бұрынTambour has been on my list for a while and I finally got to do it! I designed it on a breadbox, a whiskey cabinet and a buffet. I figured the breadbox would be the lowest cost of entry. It was so fun figuring out how to make this and it gave me some new found confidence in dovetails and tambour will definitely be a part of future builds!
I've made the digital files and physical templates available for sale on my website.
But my paid tier patrons get files free and the templates at a discount:
/ coffeycustombuilds
Affiliate Links (These help support my channel):
3M Cubitron Sandpaper 775L (my preferred sandpaper): lddy.no/1i4wg
White wood marking chalk: amzn.to/3Lmpbdf
Cotton Twill Tambour Cloth: amzn.to/3W4EAny
Titebond Speed Set: amzn.to/3Y31j68
Mitutoyo Calipers: amzn.to/4dht1Av
Parafin Wax: amzn.to/3W08Xvq
Glue Roller: amzn.to/404WOXs
Starrett Tape Measure: amzn.to/3Rt6SqQ
Festool Kapex: amzn.to/3sWE7Jz
Shaper Origin: www.shapertool...
Festool Domino DF 500: amzn.to/3GpLwUJ
No. 5 Dominos: lddy.no/1iq3i
Double Sided Tape: lddy.no/1iq3j
Bits & Bits 1/2" Compression Flush Trim: bit.ly/4a2mbOg
Stanley No. 4 Smoothing Plane: amzn.to/3uCJeyR
Festool TS60 Track Saw: amzn.to/3R8DpRg
Festool ETS-EC 150/5: amzn.to/416qkwx
MircoJig Push Stick: bit.ly/47GP2pO
CMT Orange Flat Top Ripping Blade: lddy.no/1iq3h
Totalboat: bit.ly/3IEHrOr
Starbond: bit.ly/3ITPpUy
MircroJig: bit.ly/3XecHbP
Magswitch: bit.ly/3H6uhJl
Bits & Bits: bitsbits.com/r...
Rustic Lumber Finish: bit.ly/3mZWDxF
Bidwell Wood & Iron: bit.ly/40geRJL (Use code COFFEY10)
Jobber: bit.ly/3iPzZps
Grabo: order.grabo.co...
Coffey Grinds: bit.ly/3GKL6rR
#woodworking #tambour #dovetail
00:00 Introduction
00:18 Box One
01:49 Joinery Issues
03:50 Tambour - Round 1
06:10 Hard Pivot
06:50 Box Two
08:44 Templates
10:38 Tambour 2.0
11:25 Veneer
12:20 Dovetails!
12:47 Sharpening Tools
15:31 Top Bevels
16:39 Back Panel
17:44 Tambour Jig
19:50 Tambour Glue Up
21:03 Brass Hardware
23:16 Surface Prep and Finish
@BadAppleWoodwerx Ай бұрын
Not gonna lie, that “not a dovetail tutorial” made more sense than 99% of the dovetail tutorials I’ve watched. 🤷♂️😎
@CoffeyCustomBuilds Ай бұрын
Maybe it's time to do a full breakdown!
@jimrosson6702 29 күн бұрын
Great video Mile the bread box turned out amazing. Always enjoy watching your videos love the way you explain what you are doing as a new woodworker I feel like I understand everything you are doing and could go out and do it. Thanks for sharing your passion.
@CoffeyCustomBuilds 29 күн бұрын
That makes me very happy to hear! Thank you!
@tickfarmwoodworks Ай бұрын
Mike, really, three weeks grounded for making a funny face? I think it was great. I love it when folks include family, pets, snippets of nature, etc. In their videos. Introduce us to him.
@CoffeyCustomBuilds Ай бұрын
His insolence will not be tolerated 😁
@FernandoM-8 Ай бұрын
I think a loaf of sliced wonder bread would have been a nice contrast for the final shot.
@CoffeyCustomBuilds Ай бұрын
The problem is I had just eaten all of my bread.
@JeffFontecchio Ай бұрын
Nice box!
@CoffeyCustomBuilds Ай бұрын
Haha thanks man!
@stevei0 Ай бұрын
Looks great. Love the video format. Well done.
@CoffeyCustomBuilds Ай бұрын
Thanks Steve! This will be the format moving forward. Much easier production and I enjoy it more.
@FrazerCanyonWoodworks Ай бұрын
Turned out great.
@CoffeyCustomBuilds Ай бұрын
Thanks man!
@Andi.Mitchell.Designs Ай бұрын
Another beautiful project video from coffee… show off! Lol 😂 Great job sir!!!
@CoffeyCustomBuilds Ай бұрын
Thank you! Haha
@PsychoTillerSailing Ай бұрын
Great project and video, thanks for taking the time to capture everything. Love the part with the board hitting your planer while using the table saw sled. It's funny because it's so true and relatable. I can totally see myself doing that exact same thing, but it would have probably taken me half a day to figure it out, after disassembling and rebuilding the sled about 10 times, then taking the table saw apart to see why it's sticking!
@CoffeyCustomBuilds Ай бұрын
Thanks so much! Gotta include the failure!
@bradsnapp5360 Ай бұрын
Great content Mike. I need to a) build a crosscut sled and b) dial in my dovetail skills. You provided plenty of ways to improve ones joinery techniques. Thanks for taking your time to lead us through the processes for this breadbox build!
@CoffeyCustomBuilds Ай бұрын
Thanks for watching man! I need another cross cut sled too.
@ghajduk9512 Ай бұрын
Still drooling over how good that top edge blended. It looks awesome. The brass was a nice touch.
@CoffeyCustomBuilds Ай бұрын
Brass never gets old!
@SliPDesignCo. Ай бұрын
Fantastic video Mike. I’ve wanted to try a tambour project for a long time and your video has given me the confidence to give it a go. Love the honesty in the video showing the mistakes and how you fixed them. Keep these videos coming.
@CoffeyCustomBuilds Ай бұрын
Appreciate the support man! Loved making this video!
@averagejoesworkshop Ай бұрын
As I'm sitting here watching this, I am thinking about being able to make the Tambour track tenons cut using the Origin. You could cut the slats, then batch out the tenons on each end.
@CoffeyCustomBuilds Ай бұрын
Yeah doing tenons on the origin would an option for sure!
@scottreynoldsbuilder Ай бұрын
Book matches are so magical! I made a bread box like that in h.s. shop class. I'm sure it was pine and different joinery, but similar design. 😄
@CoffeyCustomBuilds Ай бұрын
It's a classic look dude! So much fun.
@scottreynoldsbuilder Ай бұрын
@CoffeyCustomBuilds Yours came out amazing, really beautiful!
@TheLivingTimberCo Ай бұрын
This is so frickin beautiful. Great job!
@CoffeyCustomBuilds Ай бұрын
Thank you
@garrickwright4114 Ай бұрын
looks like a fun build
@CoffeyCustomBuilds Ай бұрын
It was amazing!
@BLDbuilds Ай бұрын
You sure you didnt make a toaster? Cause that breadbox is HOT! Tons of great information and ended up being an incredible piece.
@CoffeyCustomBuilds Ай бұрын
Thanks homie! I absolutely love this one.
@TyeMadeIt Ай бұрын
Love the video bro! Pretty cool process to watch it all come together.
@CoffeyCustomBuilds Ай бұрын
Thanks for watching dude!
@jacobdean1454 Ай бұрын
You probably already know this now, but I find it much easier to cut the rabbits from the solid piece before cutting it into individual staves
@CoffeyCustomBuilds Ай бұрын
That makes so much sense!
@jaysalmon9544 7 күн бұрын
I can’t find the templates on your website, can you help me
@mikepurnell5645 Ай бұрын
What vacuum clamp is that?
@CoffeyCustomBuilds Ай бұрын
It's by VAC PAD. Here's the link: kourostools.com/shop/p/woodshop-system
@veetek33 14 күн бұрын
How long did you let the pieces rest after you re-sawed them? I am wondering if that’s why you had to clean them up with hand tools
@CoffeyCustomBuilds 3 күн бұрын
What parts had to be cleaned up with hand tools?
@veetek33 2 күн бұрын
@@CoffeyCustomBuilds 5:06 - 5:14
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
Start Making (Woodworking)
Рет қаралды 108 М.