As a fisherman that was very helpful! As a person that admires comedy that was excellent. "I Just made a cork out of a cork. You know what I am talking about."

Tip for cutting your felt for the magnet. Lay the felt on your metal bench, place magnet on felt, cut around magnet with a razor knife. No need for a writing implement and scissors. :) Love the Hacks.

Ta - Day, i found out i wasn't the only one who knew that stuff at Wal-Mart is cheaper in the hardware department than the fishing. Great hacks & information Brother. Ta - Day, i also watched your video 😁💪🎣😎

"Make some corks outa... corks"!...I love it!!!

5:48 OMG how have i never thought about that! thank you so much

Love your stuff. Can't tell you how many times I've fed the line through my guides and proceeded to gear up, only to realized I didn't close my bail first. #5 - why didn't I think of that before. Simple and awesome. Thanks!

The Go Pro mount hacks are genius. I would have never thought of that. You're the man. You saved me some money.

I’m new here but I’m gonna be a regular, love the content and the humor. 👍

ABSOLUTELY GREAT.!!!!!!!! Smart thinking. I especially like removing spool to fix forgetting about bail. Great adaboy

Number 5 has gotten me more than once, never again with that excellent hack. Thnx!!

Love the magnet and clamp idea!! I will be making me a few of them!

You are a genius i dont care what anybody says about you!

You are my HERO! Love your ingenuity

Some of those were just plain clever! Awesome video, tyvm.👍👊🎣

Can’t watch right now, but it’s on my radar for later! Looking forward to it brother!!!

I have noticed items that overlap from sporting goods to hardware. I actually remember seein needle nose in the camping sections and thinking theyre expensive for cheap needle nose and sure enough hardware dept had em way cheaper.

You the man! Many thanks for sharing the knowledge.

Great video, some I never even thought of. Thanks for sharing.

Great hacks for ta day and ta morrow 👍 Seriously very handy, Thank you for sharing Keith ...you da man !!

9:56 "We made some corks....um.... Out of corks" 😂 I love these hacks!

Thanks for all your videos. Great stuff

Very creative ideas for sure. Thanks for sharing. I like the cork stuff.

Great tips man! Way better than the other KZfaqr vids I’ve seen out there. These are actually useful and not the same generic advice being spread over and over. Keep it up!

Lots of info and neat hacks, Keith. I did #6 (the hat hack for the cam mount) a couple of months ago. Works just fine. Always good stuff, and your videos give me ideas for other things to try, too!

Sir, you are so creative and unselfish. Those hacks on your video are so helpful to us, fishermen, and save us a lot of money. Thank you sir, for sharing your brilliant ideas... May God bless you!!!

Some awesome DIYs. Going to use a couple of them. Thanks

You always helping me out and ya don’t even know know me...great video...Getting my tracker ready for Santee and your simplistic ideas are helping 100%...thanks bud

Great video brother! Couple new tricks in the book for sure! Thanks for sharing!

Thats it! Camera mount and Brush clamp ! Doing that this week!! Thanks! Good tips!

Great tips! Thanks for another good video!

The last idea was the best one best video

Awesome! Thanks!

Like the clamp

I’m all over several of those. Thanks Keith

Always enjoy your videos !!!! Keep up the great work !!!! Really like the rod holder extension hack.

non stop goodies, always impressed, thanks

You have great DIY hacks , and they give me Ideas to use things in a different way than intended Thanks & keep the videos coming.

Wow, we (fishermen) watch a lot of videos, and see several DIY projects but yours are spot on, even if you only get just one out of the video you like, it's totally worth it. I saw a couple in yours that I will use, great stuff man, and what a personality you have, the guy that other guys want to hang out with cause your just fun...and a bit funny. Keep'em coming bro.

Pretty cool. I will definitely use the spinning reel trick. Cant believe I never thought of that lol.

Wish a knew no.5 &10 previously, would have saved me plenty of hassle and cash! Appreciate the vids man👍🇮🇪

You and I are a lot alike. If I can save some money by making it myself; thats what I'm going to do. You have shown me some things I will be doing.

Love the wine corks!! All good tips!! Shared this for sure

Brilliant!!! Love it man👍👍

Love the hacks, especially about pulling the bale off. Also, don't forget Harbor Freight for less expensive items. Picked up a dry box and extra tackle storage for great price today, thanks to your ammo box video (but didn't see the ammo boxes while I was there)

I used the rod holder extension on my old boat, had short standoffs using on a rail mount, got the things you mentioned and could have them any height. Good tip!!

I really enjoy your videos. I have use some of your ideas, thank you. Thank you for sharing

Thanks for the hacks I will be trying out that cork float and go pro clamp. Keep up the good work 👏 🙌 👍

Love the videos bro! Keep 'em coming!👍

Awesome ideas. Thanks for sharing.

Awesome video sir, you crammed a lot of great information in that 10 minutes!

absolutely love your videos

The Rain -x trick is GENIUS!!!

I never thought about checking the arts and crafts section for storage boxes for fishing tackle. I've had Plano boxes break on me and I'd always spend $8-$10.00 on new boxes. The arts and craft section is where I'm gonna head when I need a replacement for now on

10 great ideas great job fishing stuff keep up the good work

I love your good commonsense ideas

This is great. Already learned a thing or two

Another fantastic video nicely done my friend 👊

Gonna have to try that rain x on my trail cams great idea.

Im probably the opposite of a "hillbilly genius" in that I have few tools, few mechanical skills and am an office worker in New Jersey. But I love fishing, I love tinkering and I'm really cheap. So it seems that we have a lot in common after all! Love all your videos man, keep them coming! P.s.: just finished building your kayak nav light, and its awesome. Never really worked with wiring before, but had fun figuring it out and cant believe it actually works!

Man this video was far better then I expected very helpful I'm a subscriber now definitely

Another great video, I want to thank you for all the help you showed us how to save money 💰 And do a great job with all your Hacks , stuff I would never thought of 👍

Great video buddy. I’m going to Lowe’s tomorrow to get the stuff to make the rod holder extensions. Thanks

Great hacks. Thanks

Jus pure genius my friend, Awesome hacks!!! 👍Jay👍

Great hacks , I done the hat and go pro a couple of years ago because I refused to pay the high price for the one you buy . The spinning reel hack is awesome . I've tied my lure on and forgot to put it behind the bail .

Great hacks, keep em coming! Looks like im going to Olive Garden for some corks!!

Very helpful!

LOL Thanks a lot..U r the Man..And thank u for your time to do theses Videos

I really like your clamp idea.

Awesome!!

Credit to Moomoo outdoors, fish grips work well as an anchor clamp also. Its something usually on hand all ready too. Nice for when space/weight is a factor like in a kayak. Gotta love dual purpose ideas because idk about you but I always have too much stuff lol. Thx for sharing all the interesting and helpful stuff. Always a pleasure, be well.

Awesome job again

Man you are the coolest guy on youtube. Very handy tips.. Thanks.

Fishin N Stuff aka "The Hack Master"!!!!!

AWESOME stuff mate.

Thanks, those hacks are good ones. I even downloaded them.

Hack attack!! 10 awesome hacks Keith.

The rainX hack will be very useful! Thank you buddy!

Even though I knew a few of these....I loved this vid and your presentation ......subbed. 👍

Pays to shop. I put a TTop over my center console. The Dolphin TTop windshield that is plastic with velcro was 219.00 and I found the same size and material for a golf cart on Amazon for 15.50. Looks like the same thing except the outer vinyl is tan. Love the hacks guys. I'm doing the PVC rod holder...

Another great video and will be looking forward to more DIY’s and Hacks for 2020. Happy New Year 🎊

Great stuff. R.

My new fav channel

Some very good ideas

Thank you for the tips bro 🙏🏼👍🏼

Enjoy your stuff

U are awesome! A man that is of my heart. Why give em your money!!!

You are a Genius I've got a gopro clamp mount made like that. I love the extension made to fit in the rod holder mount. Now if i can ever get time to make and use some of this stuff. Great video brother. Keep them coming

My favorite was definitely the camera mount. I may even use it!👍💯

Great video man! Keep em comin!

Awesome Video!!

Thanks for the diy

Love the hacks and your build videos. We full time in our RV so “hacks” are a way of life!

Great stuff. Salut from France

Some great stuff! New sub from Tampa!

You can also wrap the magnets with felt bring the felt back over the magnet with a eyebolt and washers on both side(to help hold the felt . This way if your into magnet fishing where there's alot of iron or when it builds up you can unbolt and wash out all the trash off your magnet.

Told ya I’d be back, great tips brother!

man oh man the hack about taking the spool off and opening the bail on the spinning reel. That one made me feel like a nut it was so brilliant . I've left my line out of the bail a good half dozen times. I cut and tie it back every time lol no more after this.

Great hacks old Friend. Great job my man. Enjoy the channel. Fish on!

Awesome hacks my friend. I use some of these.