Fitting a KZ +2 extension to your Benelli M4 clone

No video

Fitting a KZ +2 extension to your Benelli M4 clone

Рет қаралды 7,687

ginsboy2003

Күн бұрын

Пікірлер: 25

@CatRacer1A2A 2 жыл бұрын

Just ordered a Panzer Arms M4 and have been trying to figure out how to get the +2 capacity. Thank you.... this is a project that is well within my wheelhouse.

@jnepute Жыл бұрын

Did you end up having to modify the threads on your Panzer M4 mag tube or extension?

@CatRacer1A2A Жыл бұрын

@@jnepute I ended up buying a complete magazine tube. From everything I have read, there isn't an extension that will fit the Panzer M4 without modification. The magazine tube fits without modification but sends you down the 922r rabbit hole.

@thewakawakafish4622 Жыл бұрын

@@CatRacer1A2A where were you able to find a full tube that was available?

@RK0957 Жыл бұрын

@@CatRacer1A2A Just adding an extension also sends you down the 922r rabbit hole, as there would still be a 5 round limit on the imported shotgun due to the "other" parts all being foreign...unless the Bruen decision invalidates that particular section of the 1968 Gun Control Act. With no precedents as of this post, there is legal risk in just adding the extension alone.

@CatRacer1A2A Жыл бұрын

@@RK0957 certainly not to argue, but I was under the impression that the 922r is simply parts based, not feature based. I don't recall where I read it, but I was told that the extension doesn't count as a "part" where as the magazine tube is considered a "part".

@kevindriggars591 2 жыл бұрын

Thanks again for video, it's gonna help alot of people get this thing running. Took mine out today and ran about 100 rounds of different makes and loads through it without having a single hangup. Hell of a margarita 🍹 maker, Gallagher would approve 👌

@orionfixr7713 2 жыл бұрын

This is the kind of thing that some people would point to in eliminating this as a viable gun . Not me ! I'm always up for a challenge when working on any gun . Good job and please keep the videos coming .

@christopherpeterson1400 2 жыл бұрын

Good to see you back, buddy i was a committed follower in the old a kay days

@muhsinali4268 2 жыл бұрын

It's always nice to see your video sir, please keep going 😍💪 regards from Iraq

@rwcraver Жыл бұрын

Turkenelli! I love it. I have a Girsan that I call my Benotti; quite sufficient for shooting sporting clays 2, maybe 3 times a year.

@user-wi4ho8le4z 2 жыл бұрын

You are very cool, your content is very useful unlike others

@briandady9030 7 ай бұрын

Good info, thanks for posting!

@billarevalo8782 Жыл бұрын

I love your videos. Absolutel King

@sgt_malice4521 2 жыл бұрын

I would like to see you build ak’s again

@safetyharborfirearms Жыл бұрын

Was your clone a panzer branded gun? Using the same extension on my G Force gun required shortening the extension (which I did) or adding a spacer.

@jnepute Жыл бұрын

Did you have to install the snap ring on the end of the mag tube extension? Wasn't sure if I missed that in the video?

@nickkarr2607 Жыл бұрын

yes you do. He must have forgot to do that. Panzer arms has a video how to do this too.

@southpawco1862 2 жыл бұрын

Not sure if anyone can help me, but my KZ extension was hell to get onto my SDS S4. My OE mag end cap threaded onto the mag tube fine, the old false extension threaded into the KZ cap fine, but the KZ cap would not threaded onto the mag tube without force. It would grab one thread and that was it. I ended having to put the OE mag cap onto the KZ extension and using a pipe wrench to thread it to the mag tube. I would screw it on a few threads, back it off, and check it with the mag cap. The mag tube threads were fine doing it this way. Not sure what Is going.

@bleedgreenbirds100 2 жыл бұрын

I’m running into the same exact issue that you have. Did you get your extension to thread all the way down on the mag tube with your method? I need an extra quarter inch to allow the end cap to tighten down on the barrel.