Fitting a Modified Rope Seal Kit

Fitting a Modified Rope Seal Kit - TUTORIAL

Рет қаралды 8,749

Жыл бұрын

Welcome back to a new video! Today I will be showing you a step-by-step guide for fitting a modified rope seal kit to a Massey Ferguson 135. These can be found in the A3-152 and AD3-152 engines. Hope you enjoy!
Instagram: / kevinrix_norfolktractors
Facebook: / 100063476109650

Пікірлер: 33

@peterjubb5395 Жыл бұрын

Another great video Kev. It’s always great to learn from a specialist.

@kevsvintagetractorrepair Жыл бұрын

Glad you enjoyed it thank you.

@BundyBearsShed Жыл бұрын

Thats a great video Kev, Clear and simple instructions.

@kevsvintagetractorrepair Жыл бұрын

That's very much appreciated thank you.

@darrenblattner2508 Жыл бұрын

Well that was interesting, learned a couple more things. The new seal should work quite good, time will tell I suppose. Thanks Kev.

@jrc7018 Жыл бұрын

I have fitted one of these kits and have done over 100 hours now in the last couple of months with no leaks

@kevsvintagetractorrepair Жыл бұрын

Glad you enjoyed it.

@OldCrowsClassicCars 10 ай бұрын

very clever!

@ilijaradjen8006 4 ай бұрын

👍

@kevsvintagetractorrepair 4 ай бұрын

Thank you👍

@petereldred1541 Жыл бұрын

Good video, done well.

@kevsvintagetractorrepair Жыл бұрын

Glad you enjoyed it

@farmer7229 4 ай бұрын

does the perkins 4.212 engine have a rope seal

@kevsvintagetractorrepair 4 ай бұрын

Hi thank you for your message I think it has it’s been a while since I worked on a Perkins 4 cylinder.

@bobjackson3899 7 ай бұрын

Hi kev has the seal held up ok and not leaked

@kevsvintagetractorrepair 7 ай бұрын

Hi as far as I know it's all ok and working fine.

@markoradjen2333 Жыл бұрын

I would be very grateful if the author of this great video let me advertise (tell the origin of this oil seal) because the oil seal you installed actually passed through my hands during packaging😊

@markoradjen2333 Жыл бұрын

And also I would be gratefull if you could give me your e-mail adress, I would like to contact you for some information, because I am the maker of these oil seals. Btw-put an oil on the nek of the crankshaft so the rubber part doesnt get damaged during first rotations of the crankshaft

@markoradjen2333 Жыл бұрын

neck*

@kevsvintagetractorrepair Жыл бұрын

@@markoradjen2333 hi thank you for your comment my email address is norfolktractors@gmail.com get in touch and we can have a chat.

@martinclayton2746 Жыл бұрын

Red 990 white rope in post but you're Looks better how much

@DuffMF-gr5to Жыл бұрын

Wher can I buy this kit mine is leaking great video. Thanks

@kevsvintagetractorrepair Жыл бұрын

I do normaly keep them in stock but I used my last one on this video but I should have some soon.

@mrmyorky5634 7 ай бұрын

I fitted this modified rope seal kit to my M/F 35 at the same time as fitting a brand new Indian made Crankshaft. The crankshaft has a spiral oil groove machined where the original rope seal seated. On my crankshaft this spiral oil groove was very roughly turned leaving it razor sharp along both edges of the groove. I very carefully filed and smoothed the edges away before fitting the new seal. The engine ran leak free for the first 20 hours before it started to drip oil once again. Was it worth the trouble? Probably, providing that you are using the original Perkins made crankshaft but not if you are relying on an Indian made replacement. Mine had the big end journals finish ground with a taper of one and a quarter thou over a length of one and a quarter inches and the clutch mounting driving flange which spigoted into the clutch was undersize by a full twelve thou.

@kevsvintagetractorrepair 7 ай бұрын

I’m sorry you had so much trouble with all these after market parts I’ve also in the past had the same problems As for engine parts etc I’ve found Turkey to have the best quality. Thanks for the comment.

@brandoiannella3084 Жыл бұрын

Waiting for more good video

@kevsvintagetractorrepair Жыл бұрын

There will be some more very coming soon.

@istvanrajsli7558 Жыл бұрын

2 years later, it will leak more than the rope seal. The quality of the rubber is very low. I've already done it few times, then I replaced the crankshaft so a standard 133,35x158,75x12,63 fpm seal can be used. It's necessary to machine the crankshaft and make a plate to join the engine block and the house of the seal

@yyeison256 9 ай бұрын

Do you know where to get it in USA?

@kevsvintagetractorrepair 8 ай бұрын

No sorry but the company I used for my channel may be getting some.

@tomwoodhead8654 7 ай бұрын

Ive just fitted this seal. It all went on well. Ive just taken the tractor out for a drive and its leaking again! Any ideas? Will it sort its self out after some more time? My only other thought is that the back of my sump could be leaking but the oil is coming out quite quickly and its only after the tractors been running for about 30 minutes

@kevsvintagetractorrepair 7 ай бұрын

Hi Tom thank you for your message sorry to hear the seal hasn't worked the only thing I think it could be is the end of the crankshaft is worn or the seal has a tear in it. Also if you check out one of my newest videos im working on a Dexta engine which is the same as a Massey I point out a small core plug about the size of a thumb nail which is the back of the oil gallery ive had those leak before thinking it was the rear main seal. Good luck with it please keep me updated to how you get on. All the best kev.

@tomwoodhead8654 6 ай бұрын

Hi Kev, just changed the oil pan gasket and it has fixed my leak! Thank you for your suggestion and great video 👍👍