Fitting D-Rings for Canoe Floatation Bags
Рет қаралды 6,295
3 жыл бұрынDIY Project. Fitting D-Rings for Canoe Floatation Bags is the first part of the job that secures the ag to the canoe.
Tools:
-50mm masking tape
-Tape measure
-Pencil
-D-rings x2(bow & stern) www.endlessriver.co.uk/d-ring...
-Adhesive
-sand paper
-Alcholol wipes
-Floatation bag www.lomo.co.uk/acatalog/canoe...
@greenwoodphotography188 5 ай бұрын
Thank you so much !
@GraysOutdoors 4 ай бұрын
Happy it helped👍
@orangemamba4549 3 жыл бұрын
Thanks for this. Very straightforward with lots of helpful tips/advice. Now just need to do it :)
@GraysOutdoors 3 жыл бұрын
Glad it was useful. Worked out well. Good luck. ATB. Grays
@Dadangandara 3 жыл бұрын
Amazing canoe
@GraysOutdoors 3 жыл бұрын
Dadan gandara cheers mate. Thanks for watching and commenting
@stevesdaysoff2759 3 жыл бұрын
Good video and well explained. Really enjoyed watching and subbed you. Thanks Steve.
@GraysOutdoors 3 жыл бұрын
Cheers Steve for the kind comments. I drilled through ,the hull in my next video doing the lacing setup. A bit of a nervous project. 👍👍
@stevesdaysoff2759 3 жыл бұрын
@@GraysOutdoors yes I done lacing on my canoe. I have the wedges because of the Dog.
@GraysOutdoors 3 жыл бұрын
I have sub’d. I look forward to watching some of your Lake District camps
@AustinLWright 3 жыл бұрын
Clever! These are originally intended for soft side rafts?
@GraysOutdoors 3 жыл бұрын
They are still holding strong. Gotta do some capsize practise. Thanks for watching.
@chefjuliemiel6522 3 жыл бұрын
Thank you! I did it... and just a note to REALLY cover up for those fumes. Great & helpful video
@GraysOutdoors 3 жыл бұрын
Brilliant. Fumes were alright as it was outdoors but good advice for indoor 👍👍
Sergio Outdoors
Рет қаралды 86 МЛН