knocking down wall to make room bigger .fitting rsj steel beam
Пікірлер: 30
@edg42468 ай бұрын
IMHO engineer should have specified the new doorway masonry to be keyed in (dove-tailed) to the new beam masonry to spread the load. But if the load is relatively small under the padstone then doorway masonry simply braces padstone pier and all is good. It`s therapeutic to watch masonry being built. Thanks for the video.
@markhep8 ай бұрын
Thanks Mate .think it's because the door had a corner on it that was built in 👍👍
@macplastering9 ай бұрын
Got k rend in my eye scratched my lens was a nightmare mate so know how you feel there .. great work lads on job
@markhep9 ай бұрын
Cheers Mac .yere it's bloody not good is it scares you a bit too 👍👍👍
@macplastering9 ай бұрын
yes it dose they put iodine in mine eye was a strange colour for days and took weeks to get sight back perfect @@markhep
@SteveAndAlexBuild9 ай бұрын
Making it look easy lads 🤙🏽🤙🏽nice job as Always 🧱👍🏼
@markhep9 ай бұрын
Cheers Steve .the blocks just fell out .was them with the holes in the middle .nice to be out the rain for a few days lol 👍👍👍
@brickrightbuildinglandscaping9 ай бұрын
Nice inside job for you mark bet you enjoyed not looking up at the sky 👍 😂
@markhep9 ай бұрын
😂yes was nice to be inside for a few days lol 👍👍
@brickrightbuildinglandscaping9 ай бұрын
@@markhep 👍🙌🧱🧱😀
@Clothis649 ай бұрын
With these dashes, you drop a wall as fast as you tear a sheet of paper 😁 Good job guys ! 👍
@markhep9 ай бұрын
😂😂 enjoyed this one out of the rain for 2 days 😂😂👍😉
@aussie81149 ай бұрын
Don’t under price jobs like this. You can pick up a few well deserved dollars on jobs that have some complexity or even perceived complexity. It’s not easy to do that on simple jobs because others can lowball you, but the jobs with some complexity, perceived or real, offer an opportunity to add a few dollars to make up for the jobs where you have to keep the prices conservative.
@markhep9 ай бұрын
. cheers mate .yere probably could have had a few pound extra on this one 👍👍
@nigel19649 ай бұрын
Nice Job Mark good video
@markhep9 ай бұрын
Thank Nigel .👍👍👍
@mrdeafa257 ай бұрын
When you drop a wall and put a beam in do you have to have it inspected for Building Regs or can I just get on and do it?
@markhep7 ай бұрын
You can do it .it's just when you come to sell house .you will probably have to have it inspected.i have done a few with out building regs .but I not promoting it .if you know what a mean lol👍
@jameslaurens72389 ай бұрын
Hi Mark you say you could not put the beam higher why was this. Could you not have gone higher up the wall with the props. Messier i presume and work upstairs in the above room yea ?
@markhep9 ай бұрын
Yes mate the only way was to go up stairs and prop from up there.they had a bathroom up stairs above .so did not want to damage it 👍
@aaaaa42669 ай бұрын
Thinking of doing this with my kitchen it’s 4.3m what sort of price these things cost thanks
@markhep9 ай бұрын
For the steel or for the full job doing
@aaaaa42669 ай бұрын
@@markhep steel install nock wall down I’ll do plastering removal of electrics
@markhep9 ай бұрын
@@aaaaa4266 I charged 700 in labour for this one think is was 900 with few blocks for wall pads and few other bits hire of the props. customer paid for skip and steel . 👍
@aaaaa42669 ай бұрын
@@markhep fair enuff thanks mate gives me a idea of cost
@markhep9 ай бұрын
@@aaaaa4266 no problems 👍👍
@joroyle81089 ай бұрын
Another long one 😂
@markhep9 ай бұрын
Just for you 😂😂👍
@pat_link_9 ай бұрын
Hi Mark I hope your eye is okay now sounds horrible
@markhep9 ай бұрын
Yes pat .was a few bad days .got a bit scary.when they couldn't get it out for a wile .was well sore after.been and bought a few pairs of safety glasses now .so got plenty so I won't lose them lol.making everyone were them all the time . bloody scares you a bit when that happens.all well now though 👍👍👍