Five torch tools, I would not be without

Рет қаралды 10,568

Күн бұрын

In this video, we're going to teach you all about the magic of torches! We'll cover everything from how to set and use a torch to the best way to light it, so that you can get the most out of it!
Here is the link to the best welding lens I have found Here is the link for , Tefuawe WELDING LENS 👇
tefuaweweld.com/taylorwelding
Congratulationss on starting your new welding business. If I missed somthing, I have no doubt that I will find out in the comments. Thanks for watching guys Happy welding.
Tips for welding With 6010 ,70+ or 8010 and 7018.
Just getting out of welding school Here's some advice. I hope it helps people starting their welding journey.
#Pipewelding
#pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools
I'm not a welding inspector, a safety man, or your mom. Do your own research. I'm not responsible for anything you do. Have an awesome, awesome day. Stay safe. welding tools homemade

Пікірлер: 63

@dc85337 8 ай бұрын

Here is another trick - that I use everyday I do mostly woodworking and some welding so this trick works for both. Get a 1" flat niobium magnet and a washer (or a thin sheet metal cut to shape) and put the magnet on the inside of your shirt, with the washer on the outside. You have magnetized the washer. Strongest you can buy works best. That means that you can just slap your soap stone/pencil (wood or plastic but with metal clip) to it, take it off mark whatever and slap it back on. You can tell how high/location you need to have it by the number of times the magnet sticks to your metal project. Works equally well with screws that are always just somewhere else. (holds a lot of screws, nuts, bolts, btw).

@TaylorWelding 7 ай бұрын

Great idea!

@OVERCAPITALIZE 8 ай бұрын

Jose getting in every video and im here for it

@TaylorWelding 8 ай бұрын

That’s awesome. It’s getting to where I have to go. Find him to get in the video. My numero Uno amigo.

@scottjune3554 8 ай бұрын

Wuts up, Jose. Thanks for keeping Chris straight, man

@Blackopsmechanic338 8 ай бұрын

Your talking and Jose is getting the work done. 😂😂. Great tips and advice. Peace

@houndsman406 8 ай бұрын

The Curv-O-mark is very handy for coping beams too

@jacemason9907 8 ай бұрын

Just stumbled across your channel. I've been welding for 15 years and still learning every day. Love your videos, keep em coming!

@SirCarlosMusicBMI 8 ай бұрын

I Love it when you do the best that you can do in everything you do. You’re definitely a professional at what you do. Blessings, Carlos ✝️🙏❤️😊🇺🇸

@AndrewDock 8 ай бұрын

Keep Jose coming back love both of y’all together. Keep it up man.

@wayneallen7916 8 ай бұрын

The only thing I’ve ever used a tip drill for is drilling through my fingernail to relieve the pressure of a blood blister. Probably not medically recommended but, it works very good!!

@user-nq6zg3jb8u 3 ай бұрын

Such awesome information! I’m a welding instructor at a career center and we watch your videos a lot. Thank you🇺🇸

@TaylorWelding 3 ай бұрын

That’s cool! thanks for letting me know. Where is your career center at?

@GARRETT-FAB 8 ай бұрын

Been in business for 7 months now, I have about 5 years of fabrication experience and really enjoy the videos.

@ebk304 Ай бұрын

You are the man! We respect & appreciate you brother.

@johndoe43 2 ай бұрын

Those drill tip cleaners can be great for mig tips when using aluminum wire.

@gunnerlrr 8 ай бұрын

The only problem with the medal template is they take up so much room. I’m limited to space in my rig. Curve-o-mark is a must have for all welders in my opinion. Great advice your the man.

@calvinfroisland4246 8 ай бұрын

Koike makes argon quick connects too that lock and are high quality for all you tig welders out there

@TaylorWelding 8 ай бұрын

Yes they do. I didn’t realize they’ve been in business for over 100 years making really cool stuff.

@andrewbennett6412 8 ай бұрын

Really enjoy your videos. Check out the b and d marking soap stone. They are very thin and come in a brass holder. Never have to sharpen soap stone again and it clips right on your pocket. Was a game changer for me. I bought three of four of the brass holders and a whole box of soap stone to refill

@shawnhuddleston1796 8 ай бұрын

I remember that aluminum bar from when I was your helper lol

@frigginpos 8 ай бұрын

I just now saw a video from you, and I'm hooked.

@cheffsolo7739 8 ай бұрын

Great video . Can you leave links in the description box so someone new to this welding life can find it ? Thank you

@TaylorWelding 8 ай бұрын

Yes 👍 I’ll try to start doing that

@area46241 5 ай бұрын

I like that angle finder would be perfect for the fullerene frame I got going together with my 80 Amp stick. Awesome channel in the pines!

@waynespears5664 7 ай бұрын

Very helpful just knowing these tool exist,would love to hang out with you for a few days of learning.......................................................Fort Worth,Tx

@Kevin-is-here 8 ай бұрын

Thanks for taking the time to share your tips & experience, learn something new every day

@Borderweldingservices 8 ай бұрын

Thank you so much! Very insightful, greatly appreciated! I watch a lot of your videos!

@James-fs4rn 8 ай бұрын

👍 thanks for sharing!

@seller559 8 ай бұрын

Great video 👍👍👍👍

@williamthomas9463 8 ай бұрын

Another shout out for Koike quick-connects! I bought my first ones like 17 years ago. I’m still using those (both for my torches and inert gas fittings) and the only time that I’ve bought more was when I bought additional hoses, regulators, torches or equipment. They’re worth every penny.

@neilheriot2361 8 ай бұрын

That soapstone trick is slick, I normally just use the soapstone holder but that is quick and easy.👌

@zenabu80 8 ай бұрын

I was watching Austin Ross and he uses 1/16 soap stone. I got some from his store and tried them. The 1/16 thick soapstone has become my favorite soapstone to date. You can get that thin line and don't need to sharpen it ever.

@JR48Welding 8 ай бұрын

I appreciate all the tips you put out there. Took us 20 plus yrs to learn but man it sure makes me feel good teaching young bucks that have that fire to to get er done.. keep it up brother 💪 🙏

@TaylorWelding 8 ай бұрын

Thanks brother JR! It does feel good to give back.

@johndoe43 2 ай бұрын

You always do a good video.

@TaylorWelding 2 ай бұрын

Thank you

@comingtofull-ageinchrist6736 8 ай бұрын

I’ve been trying to find tip cleaners in the welding sections at the Lowe’s and Home Depot and can’t find one lol who would’ve thought!

@danbettney3097 8 ай бұрын

Watching here in the UK , in the welding game myself (mostly quarry work) keep the videos coming 👍👍

@johndeninger8905 8 ай бұрын

thanks again for another great video buddy 👍👍

@Truth2Truth777 8 ай бұрын

Goooo Jose!!!! Great video Chris!

@WorldMoneyWins 8 ай бұрын

Great job brutha!!

@MrBigman12391 8 ай бұрын

My dad doesn't speak English and wants to learn more, it would be amazing if Jose could maybe translate

@thedub9031 2 ай бұрын

Maybe you could translate for your father.

@mo-ni 7 ай бұрын

What a cool channel buddy! Greetings

@TaylorWelding 7 ай бұрын

Hey, thanks!

@rustyshahan935 8 ай бұрын

Thanks for the tips. Got to try a few of them. My uncle gave me a curve marking tool (I don’t know what the proper name is). I used it to mark miters on the ends of 4 1/2” horizontal overhead over a cattle guard entrance. First time I ever saw one used, friend of mine marked upright pipes of a pole barn. Marked and cut them at the angle of the roof pitch then welded rectangular tubing rafters directly to the pipe uprights.

@maverickweldiing8621 8 ай бұрын

well done wont say i agree with ya on everything but good solid advice

@CSERepair 8 ай бұрын

Amigo jose favorite emoji is 👍🏼👍🏼😁😁

@ronniedoyle7646 6 ай бұрын

Could you show how to properly use a "rosebud", as I am using my #5 it sometimes starts doing mini explosions, then blows it self out. I experiment with different gas pressures and still every so often it starts popping. Thank you for posting the videos.

@JohnStrandt 8 ай бұрын

What you call a saddle is known to me as a fish mouth.

@paulruiz4596 8 ай бұрын

Ive been welding for a hundred years and havn't learned a thing from you that I didn't already know ! But !!! Still watching the vids. Good stuff my friend, keep up the good work.

@southernboy393 8 ай бұрын

The red and green quick connects are western brand. They are garbage. I took them apart and cleaned them. I replaced them. The acetylene one will leak when the torch isnt hooked up. Finally gave up and bought a set of the Koike brand. They are doing good so far.

@mikethompson1725 8 ай бұрын

When I was in welding school about 20yrs ago my instructor told us the torch tip was like a woman, be gentle with the holes if you’re not gentle it won’t be no good 😂 and those tip drills are a joke if you even fart when in use, you’re gonna break the bit off 😂

@TaylorWelding 8 ай бұрын

Lol!!! Good one