Fix A Snowblower Engine That Surges!

Рет қаралды 53,374

9 ай бұрын

How To Stop A Tecumseh Snowblower Engine From Surging!
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Check out my new DIY channel here @MadeInMyGarage
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link:
/ donyboy73
Buy micro drill bit set here;
www.amazon.ca/FineGood-0-6-3m...
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZfaq and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZfaq to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
Tengo tutoriales paso a paso fáciles de seguir y completos, videos de "hágalo usted mismo" (DIY) para ayudarlo con su equipo de jardín y césped roto, incluidos quitanieves y cortadoras de giro cero.
Hago todo lo posible para enseñarle cómo diagnosticar fácilmente problemas de la manera más rápida, rápida y eficiente con reparaciones reales más allá de simplemente reemplazar una bujía. Estos consejos son tanto para el dueño de la casa como para el dueño de la tienda.
Ya sea un motor manual de dos tiempos y dos ciclos como una motosierra, un desmalezador, un desmalezador, una cortadora de hilo, una cortadora de césped, una cortadora de hilo, una cortadora de setos, una podadora, una desbrozadora, un soplador de hojas o unidades de cuatro tiempos y cuatro ciclos como una cortadora de césped, una cortadora de leña, un tractor cortacésped, una cortadora de césped de giro cero, una sopladora de nieve, una lavadora a presión, un generador o una cortadora de césped que necesita que se instalen o reemplacen piezas, soy su persona indicada.
#donyboy73 #howto #tecumseh

Пікірлер: 147

@donyboy73 9 ай бұрын

Watch next; HOW TO Grease Snowblower Augers With Or Without Zerks! kzfaq.info/get/bejne/jtuVoLRn28zRYmg.html

@ThePlowGuys 7 ай бұрын

Thanks Dony. I am now a snow blower repair champ. got the neighbors coming far and wide with their equipment. $$$$

@richardrandall1852 2 ай бұрын

Word of mouth

@josephrich6014 9 ай бұрын

Be careful and patient with micro drill bits. Easy to bend or break. And if break off in the part you're drilling, it's not a good time.

@majorman2315 3 ай бұрын

10 minute fix and she's running smooth again, thanks for showing us this repair Dony!

@ChristopheBeauregard 5 ай бұрын

I've watched you do this fix a few times over the years but never needed it. Well, the day finally came when my engine stopped wanting to idle, and after remembering this trick it's back to purring like a kitten. Sweet.

@garundur 8 ай бұрын

Hi, thanks for the guidance! I was too impatient to wait for drillbits, so I used a “hair” from a wire brush to clean out the holes. Guess what? It worked!

@100vg 9 ай бұрын

Several relatively easy fixes recently with great to know tips. Thanks, Don.

@bradcook3242 2 ай бұрын

Thanks for your help Donny..

@inkymark7655 7 ай бұрын

Excellent instruction

@berardia4 9 ай бұрын

Your original video on this subject was the only one out there that helped me with this problem. Thanks.

@dprowelldpr 3 ай бұрын

I tried both your tips and it worked like a charm! Thank you!

@mattb9664 9 ай бұрын

I followed this similar video a few years back with the same fix for the same engine- it definitely works!

@richardybanez9052 9 ай бұрын

If I Work On Teh.This Is Awesome Info.Thank You Master Richard. ..

@timvoiss1568 9 ай бұрын

mine is a5.5 bought in 2011 never did like the surging, guess I will go do this now thanks donyboy73

@tatscene 5 ай бұрын

Thank you very much for this video, got my snowblower running top notch now 🤘

@barryackerman3331 6 ай бұрын

Thanks...runs perfect now...

@pmelchman 7 ай бұрын

I've watched all your surging videos for the Tecumseh engines, from the needle to the carburetor. The carburetor was the fix. Thanks so much for your help. I have an Ariens 926 LE circa 2005?? I put a 27W LED light from Tractor Supply right on top of the auger. Lights up the whole driveway.

@iusetano 7 ай бұрын

Thank you.

@bobmcl2406 9 ай бұрын

Good old Techumseh Snow King. Really solid engines. I didn't know about enlarging that jet, so thanks for this useful video.

@kencurtis228 9 ай бұрын

TY for Sharing

@rk22cc 9 ай бұрын

Thanks for the information Donny

@georgechappell2784 9 ай бұрын

Thank you

@scotsmanofnewengland7713 4 ай бұрын

Nice and informative. I have fixed snowblowers,lawnmowers, riding lawnmowers, rototillers and anything with an engine on it. I learned when starting a engine with a pull cord you should pull the rope out only half way twice then give it a full pull and it should start right away. Thanks again

@tonyd1149 8 ай бұрын

Thank you Don. You make it look easy. Thank you so much for your videos and help. (Some years ago, after leaving my snow thrower outside, with gas, covered in plastic, it surged this way the next winter season. Not knowing what else to do, I replaced the carburetor. Even thus I had problems [gas leaking while sitting (not running) viton seal, plastic float...]. I think this would have solved the problem, and saved me much work and grief. Thank you Don. God[Bible] Bless you much.

@RussellBooth1977 9 ай бұрын

It's a nice repair tip for if I came across a Tecumseh engine that I need to fix but I will never use a snowblower in my life because it doesn't snow in my area in Australia. There are places such as Thedbo, Perisher valley,etc which gets enough snow where they need a snow blower,it snows a little bit in the Barrington tops national Park in my area but not in lower lying areas in my district !

@drkwlsk 9 ай бұрын

Thanks Sir! Just ordered my drill kit!

@iozzelli1 2 ай бұрын

Can’t wait for Saturday to do this in my Old snowblower 😊

@brentnutter1510 7 ай бұрын

100% helped. Didn’t even do the bits, just took out, carburetor cleaner, put back in and ran great. Truth is, I think it was probably a little loose, maybe backed its way out. Also, reset the idle screw. Thanks so much for the video.

@jamesc9327 9 ай бұрын

Thank you for another repair video DonyBoy. You make the hard to find repairs become easy. It's always a pleasure to watch your educational videos sir. 👍🏻👍🏻👍🏻👍🏻👍🏻 Merry Christmas to all. 🎁🎄🎁🎄🎁🎄

@trcass1 9 ай бұрын

great job. thanks for sharing.

@65csx83 9 ай бұрын

Another top notch help aid. Fortunately, my 33 year old Craftsman unit hasn't developed this malady yet but it's good to know there's a fix if needed.

@nospamheredude5838 8 ай бұрын

Pretty sure that the air mixture screw shown in this video isn't on your 33 year old machine.

@stephenzies8867 9 ай бұрын

Don You Are Awesome. Your Knowledge Is Priceless . 👍

@MrGoosePit 9 ай бұрын

Thanks Don. I'm sure this will come in handy for me in the future!

@trumpzilla4193 9 ай бұрын

Merci Beaucoup once again!

@mrclaus859 9 ай бұрын

Thanks Dony

@RaysLaughsAndLyrics 9 ай бұрын

Nice work.. Thanks for sharing.👍🏁

@DaveB506 6 ай бұрын

👍👍thank you

@liljoeii6091 9 ай бұрын

Thank you for the video.

@nicholasr1977 5 ай бұрын

Dony, nice work buddy always love watching your videos when i have an issue! Thanks for the knowledge.

@cycleguy666 9 ай бұрын

Those old Tecumseh engines ran soo nice!! I use to replace the carbs with a fully adjustable unit main and idle mix!! Soooo smooth and well running. Those carbs could be bought in the US for about 12 dollars. 😊

@dannyg402012 9 ай бұрын

My thoughts exactly. Had a 70's Tecumseh on a mini - bike when I was a kid in the 70's and a 70's Snowblower with a 5 HP up until I sold it about 8 years ago. Carbs were well built, never had any problems with them engines. They run strong and so easy to work on. Had that Snowblower 30 years and still ran like new.

@AtomicFallout757 9 ай бұрын

Yes. I have one of the very common 12 HP B&S flathead vertical shaft engines which always idled very rough. The factory carburetor did have an idle mixture "adjustment" but it never did anything meaningful despite knowing that the carburetor was clean. In August I took it upon myself to retrofit a fully adjustable Tecumseh carburetor onto the engine, which actually turned out to be quite easy, and now it runs so good, even cold, that you might be tempted to think it is fuel injected. Tecumseh carburetors (when kept away from ethanol fuel, of course) are great on more than just Tecumseh engines!

@diverdave4056 7 ай бұрын

and how would I know the correct carb to buy in order to change mine out for a new one ?

@wynastefanik4045 6 ай бұрын

Following @@diverdave4056

@BobPritchard 3 ай бұрын

Many thanks Donny. Worked perfectly, in my case on a brand new replacement carb!

@donyboy73 3 ай бұрын

I often have to do this on new oem carbs!

@BobPritchard 3 ай бұрын

@@donyboy73 I love your channel and its helped me maintain my fleet of snowblowers!

@jas350 9 ай бұрын

Thank you. Your awesome

@famasmaster2000 9 ай бұрын

Thanks Dony, easy and awesome fix. I can't wait to try this, my blower is doing the exact surging. Thanks for the tip 😊

@fredbarrett5494 6 ай бұрын

is there a fuel filter on the Tecumseh snow blower ?

@clarkcortezer2414 3 ай бұрын

If there is one, it'll be located below the fuel tank on the right side. If there isn't one, I usually add a cheap filter 'screen' and a 90° plastic fuel shutoff ahead of it.

@deanmoore420 9 ай бұрын

Nice work 👍

@paulm3481 9 ай бұрын

Great tips thanks.

@saewoody6366 7 ай бұрын

Snowblowers don’t generally have filters because they are not operated in dusty conditions.

@karlschwab6437 9 ай бұрын

Thanks Dony, I have something else to try now.

@wayneberry8703 9 ай бұрын

Top work, Donny

@jeffsond Ай бұрын

Thanks!! I have an Ariens snowblower with a snowtek engine. Hope it’s similar because I have surging. Also, when I prime the engine fuel squirts out of the carburetor…

@robertdancho9671 9 ай бұрын

Good good and good.

@danielrobert7181 9 ай бұрын

Hi Donny ! Some caution is in order since the required 0,013 to 0,015 inch drill bit is half the size of the smallest bit in the set linked in the desription as I'm writing this comment. If I'm not mistaken, one would need a 0,3 mm drill bit to do the job. Oversizing the orifice will get the engine to run too rich. Regards !

@garyhodder2784 9 ай бұрын

Great video Dony!

@TOWNCARBUBBA87 9 ай бұрын

Good job brother 👍

@tomfillmore9710 9 ай бұрын

Great video thanks for sharing have a great weekend

@kjell-richardlvdal373 9 ай бұрын

Great tip, you are the best, Have a Nice week end

@louisbecker5941 5 ай бұрын

You can also use 'welding torch tip cleaners' to ream out clogged carb jets, or slightly enlarge them. For 10 or 15 bucks, you get a whole bunch of different sizes for different types of small engines, too.

@ChrisLascari 9 ай бұрын

This video randomly shows up today when I wad about ready to smash apart the tecumseh on my log splitter. Thanks, Dony, for saving my sanity

@jamesyee4143 9 ай бұрын

That's for that nice tip!😊

@billsmith1770 9 ай бұрын

sometimes i use tip cleaners for an acetylene torch to clean/slightly ream jets .

@37yearsofanythingisenough39 9 ай бұрын

The tip cleaners are actually a type of reamers that cut on their edges, a drill bit is not designed to cut on its edges only the tip, so you are in fact using the better tool for the job. Don knows this but didn’t share that info in this particular video. I’m guessing that is why he ❤ your comment.

@shauneq 4 ай бұрын

Careful. The tiny drill bit broke off inside the hole, now I have to get a new jet. NOTE: I did not buy the drill bit set Dony receommended, so I may have unfortunately gotten cheaper bits. I don't know why it broke, I was not going side to side, just in and out

@fixit4182 9 ай бұрын

Thanks for the tip. I’ve got 4 of them lined up here that are waiting for work to be done on them. Some don’t have this adjustment

@LaVernSkarzenski 9 ай бұрын

Good video!! What about an Ariens snow blower with a Subaru engine?

@robertmailhos8159 9 ай бұрын

It's getting close to Snow ❄️ blower usage time up there in Canada and north America

@steveharleyfan 9 ай бұрын

Noooooooooo......

@robertmailhos8159 9 ай бұрын

@@steveharleyfan not fun to be getting the snow blower ready for the winter ❄️ stuff called snow ❄️

@brucenicov1224 9 ай бұрын

Nice fix Don!! I have an old Toro 521 with a Techmseh that surges occasionally. I’ll take another look at the carb.

@markpinther9296 7 ай бұрын

Is this also the surge fix for newer Ariens snowblowers with the weird little choke and throttle controls?

@Patrick4959 9 ай бұрын

grouse video there Donny mate love it and a good video when your all getting ready for the Snowblower Season over there and cheers from Australia 🐨🐑🦘🌴🇦🇺 or the land down under to your area in Canada 🇨🇦

@coltonhall6671 5 ай бұрын

I have a question in regards to the governor…. I recently replaced my carb and throttle lever spring with new ones and my engine is running way better the only thing I’m not sure about is if the governor linkage should be moving back and forth kind of like a “surge” when it’s at full throttle…..what could this be?

@KensSmallEngineRepair 9 ай бұрын

Snow King is still my favorite Engine, next to Kohler's K-Series. When does the snow start falling up there Don?

@pollywollydo 9 ай бұрын

Watch out the Trudope Stazi ( plastic cap removal div) 🤭. Will be issuing a warrant for you 😉👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇨🇦🏴󠁧󠁢󠁥󠁮󠁧󠁿

@AnthonyValeri 8 ай бұрын

I'm wondering about repacing the air filter on this engine?

@Farmer-bh3cg 9 ай бұрын

Thank you very much for showing us the fix for this. Rather than Micro drills, may I use welding torch tip cleaners?

@michaelbeckman1794 6 ай бұрын

I have both, but tip cleaners can't break through the solid crud. I'm going to put the micro drill holder in my drill and go for it!

@michaelbeckman1794 6 ай бұрын

So is the air jet supposed to have holes both vertically and horizontally through and down through the jet? I checked one of my old carbs, that I have replaced, and the "tip" of that jet is not open, just like the one I'm working on now. I understand that the jet is supposed to be screwed in tight, but when I back it out, 1 turn, the engine smooths out. Maybe I didn't need to replace the other blowers carb? I already have the micro drills.

@dfields9511 9 ай бұрын

I would first take the jet out and clean it before drilling out the jet. Also clean the carb with carb spray and spray into where that jet screws in the carb I had a blockage there and this fixed it

@michaelotoole1807 9 ай бұрын

i always use seafoam in the fuel. it will quickly remove gunk from carburetor to stop surging. as long as it isn't a small rock

@rodb8274 4 ай бұрын

I thought that screw with the plastic plug was the air/fuel adjustment, and was put there to keep people from messing with it. So, how do I change the A/F ratio? I live at 5,600 ft elevation and my carb is way too rich, when governor kicks in it blows black smoke, plus it sucks gas really fast. Can I get leaner jets? This engine looks exactly like my Craftsman 8.5 hp mod # 247.888500. Can I still buy carb parts for this old beast? It’s I excellent condition.

@ron827 4 ай бұрын

If the carb and all the jets are clean, what changes over time that requires a jet to be enlarged?

@hurstshiftin9873 6 ай бұрын

Any video of the throttle control need to see how it is configured with the spring.

@donyboy73 6 ай бұрын

Here's an old video kzfaq.info/get/bejne/Z5ychLKLq5nJaGg.html

@timcolton4680 9 ай бұрын

So, that's a snow blower ! Funny looking thing.

@joeblow7898 28 күн бұрын

what causes the screw to become fouled up? Do you really have to enlarge the holes? Can you simply replace the screw?

@user-iv4ul7nn2w 7 ай бұрын

I have same one. Why would mine ground out? Runs fine with cover off. Put cover on while running and immediately shuts off. Assuming grounding out.

@haines96 3 ай бұрын

Help! I got the drill kit, drilled it out once and went up a size and the drill broke off inside the pin! Cannot get it out, so hole is plugged, and I think I made a mess of the tip of the hole trying to get it out. Is there a part number for the pin so I can order a new one?

@willf5768 9 ай бұрын

😊👍

@capenjck 7 ай бұрын

I thought this was going to be a remake of your video on this issue from 12 years ago but now I see you've enlarged the hole which makes sense. This surging is a reocurring problem with my tecumseh snow king snowblower engine. I tried all that you suggested back then without success. The holes in this jet weren't plugged and I bought the carb kit and rebuilt the carb, no joy. The one step I skipped is cleaning the carb with carb cleaner or soaking it in carb cleaner. I don't have a garage or shed and I can't keep a tub of carb cleaner in the house. Now I buy an after market carb and replace it every 4 or 5 years.

@donyboy73 7 ай бұрын

Sometimes I enlarge the bottom jet holes with a torch tip cleaner

@capenjck 7 ай бұрын

@@donyboy73 ok. Thanks

@Pete.Ty1 9 ай бұрын

👍👍👍

@larrypack1 9 ай бұрын

Don, Are you actually enlarging the hole in the brass or jut cleaning out deposits?

@donyboy73 9 ай бұрын

Enlarging.

@xmanb8193 9 ай бұрын

👍👍👍👍

@andrewsteele7663 9 ай бұрын

Thanks Son, that might be the cure I am after, Cheers

@steveriggenbach90 9 ай бұрын

Great tip. What is the starting dia of the jet? Are you enlarging or just cleaning the hole?

@michaelotoole1807 9 ай бұрын

he is enlarging it. get a set of micro drill bits and find the smallest size that wont fit then drill it out.

@steveriggenbach90 9 ай бұрын

@@michaelotoole1807 thanks,I have a set for a long time. Got mine at harbor freight. Curious as to how much he was enlarging it. I start by getting it back to a shiny full dia hole. Thank you for your response, I always learn. Take care.

@michaelotoole1807 9 ай бұрын

@@steveriggenbach90 your welcome. may the snow gods be generous to all this year. last year didn't use blower at all. depressing and kind of freaky. didn't even need to put winter tires on my truck.

@adriancoolen7935 9 ай бұрын

The micro drill sets referenced in the link start at 0.6 mm, which is about 33 thousands of an inch. The video mentions a drill about half that size?

@RandomQualityGaming 3 ай бұрын

So I have a tecumseh engine and it idles just fine but when I accelerate it stalls and dies What should I do?

@john100014 4 ай бұрын

I got one that will start but won't stay going. Does anyone have any advice

@nunol1554 3 ай бұрын

i drilled it right tru lol do i need to buy another jet?

@markcapri1532 4 ай бұрын

What’s the link for the drill bit?

@donyboy73 4 ай бұрын

Link is in video description

@johnl121 9 ай бұрын

Why does this need to done anyway? I have seen somewhere that the hole is so small because of California emissions regulations, is that right?

@dprowelldpr 3 ай бұрын

Is it just me or does that belt look like it needs to be replaced? I changed my belts and it made a night a day difference on how the machine throws snow. Especially if you have wet heavy snow.

@michaelt1349 9 ай бұрын

Wow, What happened to that gas cap!

@robertb7254 9 ай бұрын

Can we ship engines to you for repair? ..Honda GX 160

@bobg5823 9 ай бұрын

WHAT ABOUT THE CRAP ALL OVER THE GAS CAP THAT WILL STOP THE TANK FROM VENTING CAUSING A SUCTION OR STOP FREE GAS FLOW

@mathieuainsley3234 7 ай бұрын

Hi , i have the same blower but im.pretty shure i dont have the right sparkplug , anyone can help me with # it a columbia 524 tecumseh, only thing left i can read

@donyboy73 7 ай бұрын

Tecumseh engine takes champion rj19lm

@CivilDefenceCanada 9 ай бұрын

Thanks Don! My aging Tecumseh has this exact issue and I'll do this on it. While you were in there I hope you changed that belt it was crazy loose. Have a great Thanksgiving!

@michaelotoole1807 9 ай бұрын

that belt is the auger belt. its loose when you aren't blowing snow. when you engage the auger handle a pulley wheel presses on the belt to tighten it up around the engines shaft engaging the augers.

@michaelotoole1807 9 ай бұрын

why was the engine running fine for so many years only to develop surging now? does the engine wear over time create this problem where you have to enlarge the fixed jet?

@luuk-out-below9804 9 ай бұрын

Best guess is the version of pump gas we have now, needs more fuel now as its less volatile. Pump Gasoline doesn't even smell the same now as it did 20 years ago. Then there is also the epa emissions that forced the makers to run as lean as possible so the slightest restriction here becomes a surge issue.

@michaelotoole1807 9 ай бұрын

@@luuk-out-below9804 hmm... I hadn't considered that. very interesting.

@80SWoods 9 ай бұрын

Likely engine wear which reduces compression which changes the amount of air/fuel the engine sucks in. Small engines are tuned at the peak of performance and efficiency so a minor change can cause them to surge. People blame the EPA, but it’s also about performance. Being at the point right before it’s too lean is when it makes the most power without wasting fuel.

@luuk-out-below9804 9 ай бұрын

@@80SWoods These are all factors, but when you make something this touchy its prone to malfunction.

@michaelotoole1807 9 ай бұрын

@@80SWoods thanks!