Thants to @scb2scb for designing a print adapter so the fan won’t fall off - get it here: www.thingiverse.com/thing:6263316

Don't have a camera with overheating issues. Here for the vibes. Best and obviously most handsome camera tech youtuber around.

I am so glad that Ulanzi stepped up to the plate.

I had been seeing that cool little fan and wondered if it worked. Definitely sounds like it does. Thanks for always awesome fun reviews!

Great job on the video Mark! Thanks for making it. Been wondering about these little things.

WOW! I have had an issue with one of my ZV-E10's overheating on me lately. Small footprint and still keeps a professional look to it.!

Tested this on a Nikon Z30. 4Kp24 went from overheating at 37 mins to completing the hard limit of 125 mins of recording. Fan set at level 2. 🎉 Thanks for the recommendation.

Thank goodness we have innovative 3rd party developers. Soon I expect a water-cooling system for these cameras. Maybe that is asking for too much. Anyway, good to see a rather good solution to the heat problem. What many don't realize or 'see' is the torment we put these cameras through. As one who has built many computers for fun and a few for sale, cooling is a MAJOR issue. Computer users put their rigs through literal hell, hence we get water cooling and a thousand fans in our rigs. Same going for our cute little cameras. We don't realize those chips are buzzing long at billions of operations per second. That will create a lot of heat. Thanks for keeping us up on the latest.

Mark! I got a dope video idea for you… Why don’t you test a speed booster on the zv e10. Maybe that will become the new best budget full frame camera! Always enjoy watching your videos man🔥

YES!! The video I was hoping for!!!

How is the heat performance of the a6700 when using HDMI and a Capture card for streaming 4k 30? Thx for the video!

Would a touch of Velcro (hook and loop tape) be practical? Congrats on 50K subs🎉.

Great video Mark!

This is awesome 👍🏾 great video thanks for sharing 👏🏾

I recently experienced an overheating issue with my Sony A7IV while recording a school concert in an indoor auditorium. Interestingly, I found that gently blowing on the back of the camera helped to alleviate the problem. The overheating icon disappeared whenever I did this, allowing me to continue recording. Based on this experience, I'm exploring the idea of using a small fan as a more permanent solution to manage the camera's temperature during extended use.

Another very enlightening video from Mark, as usual. Thanks a lot! But one thing you said in this video surprised me. I always though that external recording and dummy batteries helped avoiding overheating. That's why I was considering buying a Ninja V for my A7 IV.... Do you believe that it won't help in keeping my camera cool?

I wonder if electronic Peltier cooling tile can help in this situation.

I got the fan as well. I never have issues with overheating with my 6700 with how I shoot, but I wanted the extra security if I did want to do some extended shooting. Also, seeing how were talking about Ulanzi, I just grabbed the f38 quick release mount and my oh my what a game changer. It has literally changed the way I shoot. I dont have to change the plates out to use my gimbal, slider, tripod or anything else. I just grabbed several more to add to everything I own lol.

Mine falls off within minutes... so the rubber band is a good call! This fan did allow me to do a 4k Livestream for about 70 minutes with no overheat warning! I had the fan plugged into USB-C the whole time because my fan has started dying quickly. It's not too big of a deal for me since I wanted it for live streaming, and I can plug it in any way. It is worth the price, it is a little finicky, but it'll do!

i have 2x zv-e10 an got the fans at preorder 49 euro shipping included, best thing ever, haven't got time to review-it

Hi mark, I bought the Sony ZVE-10 one year ago and recently launched myself on KZfaq, doing principally VLOG/travel kind of videos. I wanted to vary video formats in future, do some live streams for example and wanted to know if I need and/or I can use this fan on the little ZV-E10 APSC camera? I suppose this little boy will have some difficulties on long streaming session without a fan… Thanks a lot for all your advices, always accurate, usefull and well shared. You definitely participated to feed the enthusiast and confidence I needed to get into video world… Keep the good work on ! Greetings from France.

Thank you for doing these tests! How does the 1080 24/30fps look for livestreaming via USB? On my Canon I can barely tell the difference between 1080 and 4k for livestreaming and I was wondering if it's the same for the ZV-E1. Thanks again!

Niceeeee, thank you for the amazing video!!!!

👍 - Thank you!

Thanks for the review: I didn't knew that this fan existed. It would be nice if you could test it with smaller cameras like the ZV-1, ZV-1 mark II, ZV-E10...

I tried this out and got not as much performance increase and decided to go with the Tilta Cage + Cooling Kit, if you like 4K60 like I do for my gaming streams it's a dream!

Looking to level up my hobby and passion (soccer, youth events, and travel). ❤ your work which has been essential to my personal growth in journey that has become more serious in the past 12 months. Primarily event based vs Talking Head, but working on growing. Recently had issues with overheating with ZV E10 and Sigma 16 in 85 plus Florida weather during instructional video as well as wedding I was asked to film (my 1st for friend). Thinking FX30 makes most sense, but really drawn to A6700 for value and ZV E1 so this makes it even more difficult on decision 😕😕😵😵 Would love your professional 🎥🎥 advice/recommendation. Thanks

What fan mode was used in the testing? You mentioned that there were two fan modes but I didn't notice if you said which mode was used in the testing. Thanks! I may try this on my Nikon Z30 if I ever run into over-heating issues.

Mark, as your top 3 fan, I would like to know how the fan affected the audio - how loud does it run? Assuming a shotgun mic atop the camera.

Nice job!

Hi sir, great videos...cheers.. If possible in any of the upcoming videos can you compare sony 18-105 and tamron 17-70mm. Thank you sir,

Muito bom 👏🏼

… don’t forget to enable the flight mode! It helps to prevent overheating and increase the recording time!

I found that Firmware v1.02 also helped with USB streaming. My streaming would overheat in ambient conditions like yours even in 720P. It is unlimited with 1.02 in 720P and no fan. I can go 33 minutes on 4K30 without the fan. I wonder if there is any difference if you don't using the fan sticker since the fan falls off anyway. It might not matter since there is no heatsink placed on top to increase surface area.

Watched all of your camera comparison videos for the jokes and also because I want to add a fourth and final camera to multi person video podcast studio. Caution said FX30 Compromise said A7CII but this has Convinced me ZV E1 can be Cool if I keep recordings to around 20 mins or so as I want it for vlogging too. If you turn it off for 15 mins or so between takes do you still get the longer recording times with the fan you started with or do they get shorter and shorter over the whole shoot?

How is the noise?

I like ot see it compared to the Tilta Fan in results.

Work on the A7iv? I have my fx30 but would get it for my A7iv.

Still waiting for that A7SIV/FX4 update. More so I can get the SIII or FX3 cheaper. But seeing the A7SIII for around $2k...I might just have to pick one up. Less prone to overheating, but for Arizona that FX3 is a must.

Flight mode, not using hs codec, running from battery also help recording longer on a6700

I mount it backwards without using the sticky pad thingy at all, so the display is on the bottom left instead of top right. It sticks to the zv-e1 a thousand times better this way.

I bought one of these and never even opened it! It's handy to have just in case!

Does it fit Sony ZVE-10?

“Just get a different camera”that costs double the price. 🤦‍♂️ The fan is definitely a great help and I’ve just come to terms with the fact that the ZVE1 is enough for most people. I also just remembered there is a very fun video project by DIY Perks where he watercools a Canon Camera, it’s a great watch.

Bro so should I take sony ev z10 or no ?

Tilta has something similar to this, but it screws on directly to an ARCA baseplate.

A friend of mine bought the a6700 and we found out that the body may be a flawed copy. Every 20 to 30 minutes , the camera shuts off with no warning ( temp limit set to high ) and turns back on like a reset. - thode are with the sigma 56 1.4 With the sigma 30 1.4 , its lasted an hour before it does the same. Wondering if its normal and the consequence of the 26mp sensor

UPDATE EVERYONE - ULANZI NOW MADE AN (UPDATED ULANZI COOLING FAN) THAT WORKS WAY BETTER. NO SUCTION CUPS, NO TAPE/FILM. JUST A WELL MADE SPRING LOADED SYSTEM TO HELP IT STAY. ITS BEEN ON MY CAMERA NOW FOR OVER 4 HOURS SINCE I GOT IT, AND IT AINT GOING ANYWHERE

Mine falls off all the time.

Till now no over-heating issue in my ZV-E1 🙂

I don’t understand how this fan works if there is an adhesive strip blocking the airflow, but clearly it does so I must be stupid. 😂

2:01 jank master 😂 More seriously, camera manufacturers have to up their passive cooling craftsmanship. Shut down should be due to battery not cooling at this price point.

Nope. No Stickers or adhesives on my ZV-E1. Never overheated once.

Mics will pick up fan noise Better off putting a freezer block on the back

You buy a camera for $2000 and attach a panty elastic band to it. This is so funny.

😂 There is a solution, get fx30 😂

Bad camera heat dissipation design. Sony shouldn't be releasing cameras that overheats so easily on settings they advertise.

sticky tape, suction cups and rubber bands.... sorry but i hate it.

tilta did this for a stupid price and made it even more expensive by requiring their cage for it. so poor

I’m not a fan of it

Suction always fail, mine drop 5 times a day, after 1 week it stopped working. Don't hard sell fail products...