I have the 06 300c srt8. I've had since bought with 64,000 miles on it . She's babied. I've had no real issues. Other than the dreaded "clunk" noise in the front. Turned out to be the sway bar bushings and would only do it on roads with little bumps and divots. That was 10 yrs ago . Now with 90,000 miles she's still going strong and still looking beautiful. It kills me that the younger guys get them and beat on them continuously and wonder why things break. I do womp on mine sometimes though I just don't beat the shit out of it. Happy motoring everyone. 👍

Glad you got that overheating issue addressed in this car good job

Great Video Jay....i had the same overheating issue with my Chrysler 300C 2005 V6...I just Replaced the thermostat , Radiator and Fan and she is all good to go....truth is....Some of these old cars and their parts tend to fail as expected and one needs to keep replacing them with Brand New Parts.....Overall...Such a Beautiful Car...i love it

That is one sweet color! Right at the end there you mentioned the ac, Chrysler a/c compressors aren't known for there reliability. But man that hemi sounds great!

You're nearly at 100000 subscribers Jay! And you certainly deserve them:)

You always make the most fun and interesting videos thank you for that and sharing your knowledge stay safe buddy

Glad to see you got this overheating issue tackled. This is one I would not mind owning - love the sound of that hemi! BTW, I had a 1993 Ford Taurus that overheated. Never could figure that one out, even after checking the fan, fan controller, temp sensor and all.

Love the Chrysler 300cs!!! Nice video!!!

We had a 300M that was just bad ass! I mean when you're talking about a sports sedan Chrysler really made exactly that. It was fast, responsive and comfortable at the same time. We got it used and that's the way I felt about it, and when it did have an issue I looked it up and saw videos that came with the car when it was new on KZfaq that showed all the cool ass features it had that we didn't even know it did 😳 it finally blew a head gasket and it's sitting on her daughter's property collecting dust but that car was really something wish we'd had it from the time it was brand new!

oh yeah, love the older square 300c with the Hemi. My son just picked up a 85 Riviera with 307 olds engine and 4 speed turbo hydromatic. Since it is being stored in my driveway I am in charge of detailing it.

Another patient lives! 👍😎 This heat is killing cooling systems right and left. I think we've had 2 weeks of straight 100° temperatures here.

Enjoy your videos bud keep up the good work 👍

Ya gotta be a good boy, Christmas is just around the corner, ask Santa for those plier things

I know that talk from anywhere lol. That was a great imitation of Mr. Eric O.

I am a fan of the 2018 Jeep Grand Cherokee 4x4 with the 5.7 L V8 engine and the eight-speed automatic transmission. These are excellent mid-size, truck-based SUV's.

I own two of these same year where would you suggest cutouts and small DC fan pumping out? Hood closer to windshield or end of front fender panel each side? Ive noticed the heat is absolutely pouring out under where the drivers door starts and the windshield side of hood. Already had rad and engine temp sensors done last year.

Nice work with the repairs Jay! 🙂👍 It's sad like you mentioned how the early 5.7's had *soooooo* many problems! Great power but pitiful longevity. Take care my friend 🔧🔩

I have an '05 300C DUB 5.7. 144,00 miles. I've replaced the water pump radiator and alternator, and keep up on services. It is a hot engine and I'm wondering if running it without the engine cover would be better for it, or if it's important to keep it on.

Woof jay you’re making us overheat lol

Between the slim shady song and the BMW comment got you a new sub! 😆 Just replaced my thermo and water pump to fix overheating issues. (Had multiple issues) Og thermo wasn't opening all the way New one tested - good Installed and still had an issue Replaced water pump today and still having issues. But I didn't bleed or 'burp" the system. Could that be why I'm still overheating? My fans are running so don't think that's the issue. And my oil is normal no signs of water mixed in. Kinda lost here but your "burping the system" comment made me think.

@ Jay Smart Put some silicone spray in the window tracks. That will help the Windows go up and down faster.

This guys so close to 100k subs, we need to get ‘em there.

Excellent video 👍 👍

"...You know it. Got the Hemi and there's coolant everywhere !" oh lol lol lol !!!!!!!!!!!!

Inferno Red Crystal Pearl was always a pretty color.

I wish the Hemi was a better motor too, I would probably own a Charger or a Ram 1500 right now

Remind me the next time I see you, I have two of those clamp pliers. Apparently, I thought I don't have one and that it would be handy to have. Twice.

Crazy how the only part not recorded is the part I needed to see. That's my luck.

Hey Jay where from yhe some town I need some s15 parts do yall have one on yall lot????

@20:47 What's up with the check engine light on?

Nice's looking car. I like the older dodges.

Beautiful Chrysler 300. Would love to find a 300 V-8 with the awd.

I finally got my first v8 4.6 manual 09 California special mustang so far it hasn’t given me issues yet 98k on it

I have 225k+ 2005 5.7 Hemi Runs brand new Great car still

Shirtless Jay 👌🏻

I'm not a fan of Chrysler, but those were beautiful cars. At least the 300's lasted awhile unlike the horrid 200's they put out.

I have this same car, mines not showing overheating on the gauge but the coolant is bubbling in the reservoir and you can smell the coolant, any ideas what's going on? I have never seen my fans come on so I'm thinking that's the problem but i don't know for sure

Mmm yess I see a Trans Am 😳😮 my girl wants one so badly ever since she seen the movie lol you know what I'm talking about

My son has a 07 Chrysler 300c he had a Overheating issue. Took it to a shop they flushed it like 4-5 times cuz it had alot of Rust and Mechanic put a new overflow tank and it seem to run fun for a couple of weeks and it wasn’t overheating and running at160-180degrees. He was Driving today and it blew the top Radiator hose and shot Clay color fluid everywhere so tomorrow I’ll replace top hose. Is there anything else that causing it to Overheat? Please anyone that has had experience with these cars any suggestions? Thank you.

I need help I have a 2012 300c 5.7 an im still overheating after changing water pump

I did that last week too, made a video of a car at the Nationals and then looked and it hadn't been recording.

I always liked the older 300S, they are great Vehicles. The 300 Series (2005-2009) was the best Generation.

So it was the (water pump)? Can you tell me what all needed to be done to it on bullet points please. Mine is overheating as well, and I’ve changed the radiator hoses and thermostat, but I haven’t done anything to the water pump, by the way, my radiator fans are fine, they are coming on as when necessary

These are nice looking cars!! It would be great if you could mention the problem areas to look out for in particular models...or any expensive repairs they all seem to need.....

Cool😀

An Eric O reference. New subscribe from me

I know the struggle of not having those fancy pliers. Those spring clamps hurt like a bitch when they snap back on your fingers, absolutely hate those things.

Nice video Jay ^^

wow wow jaysmart in the comment section!!!

What happened to your old junkyard videos those were the shit I would binge watch that shit for hours

SRT8 wheels on this one. I almost knee jerked about the dipstick, but it's the trans dipstick that Chrysler stopped sticking in so you have to buy one from them or Dorman. Im not gonna make one leakage joke.

Now that’s thinking with your dipstick

i want dat...i have two...i want another!

Wow, I hardly have ever seen these on the road.

Jay what’s your fursonas name if you don’t mind me asking

Take a "liter"...Jay, you a southerner, convert that to quarts or kindly hand over your Southern identification card.

Maxx in da thumbnail :0

Wrap the camera remote with plastic wrap or press and seal.

If you change oil ever 4 to 5 K you’ll never need an engine. Spray some silicone spay on the window tracks to speed up the time it takes to roll the windows up and down.

Harbor Freight hose clamp plyers $12.99.

Did you recently get that septum ring?

I've heard with cheep aftermarket water pumps that the impeller can slip as to not pump as it should causing overheat. Buy OEM.

Please Jay let me know what you have for sale?

The engine should be fine now

You thinking about buying one of these

sexy starts at 14 min mark ;) hahaha!

A shirtless Jay Smart

I wish he would have shown everything not just removing it..other than that good information!..

The headlights are really cloudy

I looked up that labor rate on replacing that thermostat it was over a hundred with Chryslers part aroud 385 to 465. And you know that exstra 30 bucks for shop supplies witch witch I aways hid it on all good people but if you came in with that attitude no and the survey would always find its way in cyberspace but for the most part you treat them with repect you got it back but it doesn't matter sometimes there are some you do everything for and they would still be mad at the wrong person because they ever did maintenance at Toyota in Pensacola they purchased a Camry and brought it in at almost 70k and never change the oil just added oil I was totally blown away when he replied well when I bought it the said you don't need too do anything but drive and as far as a salesman yes it could have been possible. I wasn't there for the purchase but I felt like he was being honest I did a complete 60k and flushed that block the best I could. He definitely was a great customer afterward.

It's a shame those Chryslers are such peaces of crap. They are really good looking.

When you going to fix cars in your fursuit ?

did you get th email Iscent to you I have something for you if you would like it

Boop

was that a furry on the thumb nail?

Goofy Bo 😛

I had no clue you were a *furry*

Is jay a furry?

ｐｒｏｍｏｓｍ

Those cars were built for suckers. Big promise, low quality. I like you better in a shirt. Need some kind of protection working on stuff, Jay! You can easily make a pair of pliers like those. Just buy a pair you like and drill out the recesses you need. My pair has served me well since before you were born.

Unfortunately it's a Chrysler and it's a piece of shit. all the Chrysler engines that end in .7 are junk. The 2.7, 3.7, 4.7, 5.7 and 6.7 were horrible engines. I've worked on tons and tons of them over the years. Chrysler went to shit when they discontinued the 4.0 and both the 318/360 engines. And then just destroyed themselves when they became FCA. I've owned plenty of Chryslers as flip vehicles...hardest cars to sell...even harder than a damn Audi/VW and those are just as shitty.

I installed a thermostat in a 200 3013 6v that vehicle probably has a water bump our a head gasket but I'm like you, we go by the steps I'm 61 you can't find techs too fix vehicles especially Mercedes and Volkswagens it's sad. And while running the shop at Mercedes, they would send the techs to school for a whole year when I pulled wrenches. I may have gone to school at the most 3 times a year. The longest school was 3 days for electrical 1 n up to three with two more times going that's it Mercedes and Volkswagen was the biggest non technicians ever.and I traveled fixing stores from Florida to Colorado. Made dam good money money but the stress doesn't purchase a new heart or prevent a stroke.