Gunhumping weirdos love the sounds of their own nonsense
@paultrott31202 жыл бұрын
Amen
@chris2302 Жыл бұрын
Agreed.
@terryfaulkner74374 жыл бұрын
I got the Erh code today, it was perfectly cleaned after the last cook, it had plenty of water. Thanks to your video, I fully opened the chimney and was back to cooking. Thanks again!
@GrillSergeant4 жыл бұрын
Terry Faulkner Glad I could help Terry! Thanks for stopping by! 🍻
@toddbickett72134 жыл бұрын
Raise the water pan 3 notches from the bottom! This is the real solve. It gives space around the temp prob. This intern allows the pellet smoker to control the Auger speed more accurately. This also increased temp stability. I was having erh code hourly and on every smoke. Once I moved the water pan up. Problem solved.
@GrillSergeant4 жыл бұрын
Interesting. I'll pass that info along for people that have issues with the ErH code.
@colebruce1able8 ай бұрын
9/10 times when someone searches this solution, they need a quick answer. Not someone trying to be funny, that clearly isn't hitting the mark
@GrillSergeant8 ай бұрын
I agree. I’ll be redoing this video. 🍻
@ampmdelivery25 күн бұрын
Especially when super frustrated. I don't need an idiot answer. I just want to get to the point. Damn. Not following you
@Jdmorris1432 жыл бұрын
I just stumbled across this channel. As a military member, I expected a bit more drill sergeant at the beginning. But the troubleshooting did not disappoint.
@mitchtucker57683 жыл бұрын
Doing my 3rd cook with my new Laredo and 4 hours into a brisket cook I got an ERL code. I pulled everything out and vacuumed everything out. Replaced it all and cranked it back up and now it’s coming up to temp. Auger was not stuck I don’t think cause it started feeding pellets soon as I turned it back on. Hope this was just a one time glitch. I was using PB mesquite pellets from the top of a just opened bag so I don’t think I had any junky pellets or pellet dust. Preshate your channel, it’s helping me a lot. You solved my stuck ash tray problem. Thanx Sarge!! I also totally cleaned everything before I started cooking
@mikevjimenez7911 ай бұрын
I’m getting an ERR code. Any trouble shooting tips for that code?
@tammymerson66294 жыл бұрын
Thank you! We had the ErL error. We used our vacuum and cleaned the hopper. It was jammed up. After that we be SMOKIN'!! Love your apron!
@ericwhite-c4zАй бұрын
Hello, we got everything ready for a full smoker run (6 baby back ribs and 2 7 lb chickens), got the smoker started and when we went to preheat we got the ERL error. I watched your video, and remove all the pellets and vacuumed the remainder out of the auger, added a cup if pellets back in and the grill started up. Thanks.
@durt93743 жыл бұрын
How can you unjam the pellets on ErL error code ?
@patriotjoe3110Ай бұрын
Do we just ignore the hula dancing tree in the background?😂
@MeatyMike4 жыл бұрын
Hopefully these companies fix these errors with updates- good insight in the meantime !
@montyashley90303 жыл бұрын
I’ve got the same smoker since October. It hasn’t worked right yet. Finally yesterday I tried one more time. I turned it on full blast. After it quit about 30 mins I turned it down to 225. I ran it two hours and the temp stayed 225. So far so good
@dayrawls33653 ай бұрын
What did you do differently? Mine worked once & then I get Erh Code.
@CraigArndt4 жыл бұрын
I got the ErL a couple months ago, googled it and it wasn't hard to fix. But the unit shutting down is actually pretty smart. The hardest part was getting 40 pounds of pellets out of my smoker.. that said, I had just loaded a new bag I had shipped to me. I won't do that again. It was full of dust and that caused the unit to shut down. My Series 5 is pretty frugal on pellets so I will keep less in the hopper. Best cleaning for the glass and inner door, by far, an tiny SOS pad. That little steel wool cuts through everything, won't scratch the glass and no vinegar is necessary.
@GrillSergeant4 жыл бұрын
Good info man! Yeah cleaning that glass is a huge PITA!
@beckierosswoodard56614 жыл бұрын
For a perfect clean I use a razor scraper like you clean paint of windows. Just like new.
@slavpod92023 жыл бұрын
Using my Louisiana vertical pellet grill(very similar to pit boss) for the first time today. It would shut off after 300°f. I unplugged it, plugged it back in. Temperature read 410!!! I set the temperature to 250. While dropping down to 250 it shut off again! I watched this video. Unscrewed the top almost all the way, banged on the back door, and plugged it back in. Holding 300 strong now. Will raise the water tray for the next time. Mine is an inch away from the probe right now.
@BamSigma4 жыл бұрын
Doing my first burn off now and got an erh code. It's working now that I opened the chimney cap. Thank you. You deserve way more subscribers.
@HarmonHeat4 жыл бұрын
Who down wit Nop? Hell no not me! I don't even have a pitboss but this video was so good that I couldn't look away🤣🤣. Your videos are way too good for a channel less than 1.5k bro, keep up the hard work and you'll be 1.5million in no time
@GrillSergeant4 жыл бұрын
Ha! Fingers crossed! Cheers bro!
@HarmonHeat4 жыл бұрын
@@GrillSergeant don't worry, this time next year your channel is gonna be huge!
@davidpritchett40924 жыл бұрын
Nothing for the ERR message?
@puppysgurl913 жыл бұрын
Hi, ERR and ER1 is always the temperature probe. Cleaning with water and vinegar will sometimes help clean off the gunk, if it doesn't resolve it, please call us at 1-877-303-3134.
@ve3xtr3 жыл бұрын
My 4 series just threw that code 3 times. Each time I could hear the auger struggling to turn and that’s when the code ERL code came up. Fixed now.
@seangeary3988 Жыл бұрын
So once you get ERL and you have a jammed auger, how do you clear the jam? You can empty the hopper somewhat through the back door, but how do you get to the actual auger has you can't fit a shopvac hose into the hopper?
@johnnyendo51572 жыл бұрын
I had an ERL code so I researched and saw it was the auger. I took the whole thing apart, took the auger out, didn’t appear to be jammed, and ran paper towels through the auger compartment. Next time I used it, it came on again. Getting frustrated!
@sck10254 жыл бұрын
Are you removing the cover with the 2 screws on the temperature probe housing before cleaning the actual probe?
@davonstack18 ай бұрын
Thank you! Saved my two Christmas standing rib roasts!
@JoshandBabe4 жыл бұрын
Very, very good video. I was laughing. Seriously though, this was good for people that get the error codes. Great job. Can’t wait til 1500 subs. Your videos always impress us. Ready for our collab and to hang out man!
@tfish93333 жыл бұрын
I get the ERL on mine and the auger isn’t jammed, it just won’t quit loading pellets
@darrinmiller81853 жыл бұрын
I had the ErH code and this fixed mine! I had to clean the smoke and run the damper higher.
@mikefriedmann13763 жыл бұрын
You may have saved Easter dinner with this video
@GrillSergeant3 жыл бұрын
Well then, Happy Easter indeed!
@sarrel484 жыл бұрын
Can we get a walk though of your cooking/smoker canopy/pegoda/ Pavillion/ gazebo area ie what made you choose that layout, how big is it, what type of roofing materials, professional poured flooring or diy, do you see yourself ever adding a true outside kitchen area
@sammysmirh38894 жыл бұрын
Great video I just wish I would have seen it about 20 hours ago. I bought this Grill at Lowes brought it home and started to do the burn out after watching your burnout video it got really hot an error and shut itself off I unplugged it and let it sit a while about an hour and set the temperature to 200 not 350 just to see what would happen. 3 minutes later I had way too much smoke pouring out of it and a massive fire underneath I unplugged it let it cool call customer service set on hold for an hour then took it back to Lowe's where they are building a new one for me. Customer service called me back and told me I should have vacuumed out the fire pit before relighting it. She also said I should run turn on smoke for about 10 minutes before I turn the flame up that I have not seen anybody say in their videos including yours do you agree with that? I really like the idea of this smoker I've had a few in the past but this is my first really good one and so I watch your videos and try to do it exactly the same way and had this issue hopefully it will not happen again I'll be right really watching it when I get my next one in a few days. If you could let me know what you think about running it for 10 minutes on smoke before turning it on whatever temperature you want to set it on I would appreciate that thanks so much keep up the great work I am a subscriber
@GrillSergeant4 жыл бұрын
Sammy Smirh Hey thanks for stopping by. Yes to leaving it on the smoke setting for 10 mins or so before cranking it up. If I want to cook something at 400 what I’ll do is turn the smoker on, fill the water pan and leave the door open till I start seeing smoke. Then I’ll let the smoker run on the smoke setting for 10 mins. After 10 I’ll turn it to 250. Once it hits 250 (4-5 mins) I’ll bring it up to 400. Now the trick is when you are done cooking is not to turn it off but let it run at a lower temp like 200 for 10 mins before turning your smoker off. What I found it if I turn it off at 400, when the unit shuts off, some of the pellets are still lit in the auger tube. What freaks me out is if the flame works it’s way up the auger tube it has a small chance of going to the hopper. So as a precaution, I’ll run it at 200 for 10 mins then turn it off. After it’s done with it’s shut off cycle. Sometimes I’ll remove the firebox cover and get a water spray bottle and just lightly spray it once to extinguish any remaining pellets that are still warm. Just make sure you are wearing heat gloves when getting to the fire box. Hope that helps and check out a playlist I made with all my Pit Boss cooks in it. Glad to have you aboard the channel! 🍻
@swendog173 жыл бұрын
Just saved my weekend!!! Thank you
@GrillSergeant3 жыл бұрын
Right on! 🍻
@Dissenchanted21243 жыл бұрын
Hey Grill Sergeant, I have been plagued with the ErL code many times. Auger is working just fine, and the pellets are flowing to the fire pot. What I have found is that when is says ErL,1) it seems to also point to a too low of a temperature read out. I was suspecting that a mix of poor vacuuming and smoking at a very low temperature while it is very cold out caused the flame to go out and the machine timed out and threw an ErL code....2) I have also received an ErL code and the flame went out by having the vent up top too closed. Thoughts?
@michaelh1314 Жыл бұрын
I’m having the same issue, I tried manually starting but after 2 hours it started dropping and just pushing more and more pellets in until it gives an error.
@Supreme.Dark.Overl0rd8 ай бұрын
I’m having this issue now. I unplugged and restarted my 700 series. I have a temp sensor/probe on order because that’s what I found on the internet. I’ll comment back if it’s fixed later.
@bingrulz16354 жыл бұрын
Had the ERH error code on my pitboss Very disappointed as it cut out 4 times while cooking a roast and has done it every time i used it ( 3 times) and was almost out of warranty Little did i know that it can be fixed by unscrewing the top a few turns. Thanks Grill Sergeant Cookin some hash Brownies in there now - - - - He He
@GrillSergeant4 жыл бұрын
Awesome! Glad I could help out! Just did a 12 hour Pulled Pork that came out amazing. I’ll post the video in the next few days! See you around! 🍻
@bingrulz16354 жыл бұрын
Grill Sergeant - just cooked up a mad feed in it. But errored our again. 3 times. Arghhh. I’m gonna smash it.
@shaun536 Жыл бұрын
Pit boss even had me unscrew mine pretty much all the way till the caps were just barely holding on and mine still errors almost at the 2hr mark into a smoke every single time.
@thomasvincent90272 жыл бұрын
Ok almost a year ago I bought my pitbull's pellet smoker and it worked great I cooked on it like 4/5 times from thanksgiving to Jan 2021 then I decided I was going to clean it didn't know I was supposed to vac out all the pellets left in the auger tube so when I started to rinse it off I clogged the auger and I just got it back working and I saw just now that I had an error code h on it went directly to your KZfaq channel and saw what it was now I'm just trying to keep it going
@GrillSergeant2 жыл бұрын
Yeah, water and moisture to pellets is like kryptonite to Superman. 😂 Hopefully everything is working good again on your smoker.
@thomasvincent90272 жыл бұрын
@@GrillSergeant it is I'm cooking ribs on it right now at first I was getting a error code h and saw your video on what causes it and remember that I had shut the top vent off while working on the auger so I let it cool down opened the top vent and now running 350 degree, I know I should be slow cooking the rib's but I got a very late start on them
@CarolAbramКүн бұрын
Worked fine the first couple months but now the ERH is constantly happening. It has been thoroughly cleaned out, the water pan raised as well as the damper turned fully up . The temperature climbs way over and then the dreaded code ERh shuts it off. Any suggestions?
@kevinbraker65692 жыл бұрын
Holy crap dude. Skip the junk and get to it.
@jrodjeremyflanigan7935 Жыл бұрын
Thanks I fixed my ERL code!! Appreciate it
@michaelhelton52762 жыл бұрын
My smoker drops pellets and comes up to temp but once at temp it won't feed pellets to maintain temp. Replaced the temp probe. I get the ERL Code
@DavidGunter3 жыл бұрын
In the time it took this yahoo to get around to actually helping us, I already found a document online that gave me what I needed to know.
@creepybunny2553 жыл бұрын
Hrm. Perhaps that's what you should've done first??
@MainahTony4 жыл бұрын
ive seen lots of people freak out over these and hated thier smokers thanks for doing this vid ill be getting my series 3 this week, will look good next to the 700FB! and shop vac works great!
@sjm2751 Жыл бұрын
I've found that pressure washing the grates and heat deflector save me alot of cleaning time.
@LeprechaunTV3 жыл бұрын
Your videos are so creative and great editing...my smoker threw the ErL code...thanks for saving me that phone call Sarge.
@DeadBrokeBBQ4 жыл бұрын
Nice job Andrew! Love the cloning dude!
@medalmouse213 жыл бұрын
ERH: 2:24 ER1: 3:21 NoP: 4:09 ErL: 4:32
@MrFozy3 жыл бұрын
When you remove the pellets from the smoker for storage or if you want to change wood. How do you get at the pellets in the auger tube or below the trap door, so you can completely empty it?
@GrillSergeant3 жыл бұрын
What you don’t get out will burn up when you are firing up the grill and bringing it up to temp.
@andrewpardell970110 ай бұрын
Instead of "sifting" my pellets I use a kitty litter scoop(new and clean) to scoop the pellets into the hopper
@lilbuddylee131 Жыл бұрын
Thanks. Had ErH
@dangayle572 жыл бұрын
Good information codes helped!!!
@KatiTheButcher2 жыл бұрын
Had the ERL code (Lexington). Pit boss wouldn't even power on afterwards. Checked wires, looked good. Had moved it to a work bench to take the access panel that had a different outlet nearby. I plugged it in to try it, powered right up. So all I did was use a different outlet and not use the temperature probe.
@buellman20002 жыл бұрын
Great video,Thanks
@thegracedfarm52903 жыл бұрын
Thanks for the great info!! Just had an ErH code
@jaysbrappingbbq8424 жыл бұрын
Digging the beard brother thanks for all you have done
@ctcollinthib5 ай бұрын
Just got a LO2 code and trouble powering up the unit today. It's about 3 months old.
@randyfairclothjr60178 ай бұрын
Might as well make the 45 min phone call
@GrillSergeant8 ай бұрын
LOL!
@andrewstronks84864 жыл бұрын
I've had my unit for about a year with mixed results. I started having the Erh code back in November and Pitboss sent me a new controller. After I cleaned the heat sensor in the back it seemed to be ok so I never installed the new controller. Did a big cook last week and the unit kept Erh out. Very frustrating. I did a massive clean of the unit (which I have done before as well) - still the same. I switched out the controller - the same. Found your video about the vent top - I opened this up and cleaned it (it was gross) and finally had some hope that the frustration would go away......it didn't. I still get the Erh. Any further thoughts?
@GrillSergeant4 жыл бұрын
Andrew Stronks when you opened up the vent top to run the smoker again was the grill still hot from an error code given or did you start the smoker up cold? I know from others if they get and ErH code and don’t let the smoker completely cool down before opening the event and turning it back on is it will still maintain a lot of the heat that made it error out and will possibly give you the error code again. For every cook as a habit now I just open up the top vent the whole way from the start.
@andrewstronks84864 жыл бұрын
@@GrillSergeant Started from cold. Just went through the process again. I waited 10 minutes having it on smoke (all good). Put in a pan of water, shut the door and turned up to 250 for about half hour....all good. Turned up to 300 for 10 minutes.....all good. Turned to 350....all good. Turned to 400....erh within 5 minutes
@GrillSergeant4 жыл бұрын
@@andrewstronks8486 Interesting. Maybe install that new controller? Not that I think it matters but what brand pellets are you using?
@andrewstronks84864 жыл бұрын
@@GrillSergeant So last night I did a beef tenderloin for about 3 hrs at 250 degrees. Zero problems. To finish with a burn off I turned to 350. Erh out again. This is with the new controller btw. Currently i'm using Traeger pellets. Zero reply from PitBoss on my ticket to them as well.
@jonstevens54034 жыл бұрын
Same
@michaelgreen96024 жыл бұрын
I've had my Copperhead pellet smoker almost 2 yrs,Pitboss has sent me 2 wiring harnesses and on my 2nd Temperature Control.,and I have never had over 225 degrees. How do I replace the temperature Control module ??
@GrillSergeant4 жыл бұрын
Michael Green I don’t think it would be that hard to swap it out but I’ve never had too.
@FCSGuardian Жыл бұрын
NoP Error code: Dude, the NoP error code is when the meat probe is not being used. Once you plug it in and set it up into your meat, the code should clear on the screen and start registering the internal meat temperature. If the probe is being used and you still get the NoP code, THEN inspect the meat probe for damage and insure the plug is fully seated. Check the probe plug receiver to ensure there's no dirt in it. If everything checks out OK then start looking at connections and possible control panel issues. If you leave the pellet smoker outside and dirty and do not clean it, then you will most likely start getting internal parts deterioration (rust, dirt build up, etc). The ErL code for jammed auger, I like the suggestion you have for sifting the pellets first. Suggestion: don't fill the hopper with the pellets. Just add a bit more in periodically so when you finish your cook, go ahead and burn off the remaining bit of pellets to empty the hopper and auger. That will clean it and help you get it ready for the nest cook. Just check the hopper periodically and add a few cups in it at a time. You want to keep the pellets in good shape and dry. Leaving the pellets in the hopper until the next cook, you then will encounter those pellets degraded into hardened dirt. Then you can have all the fun of disassembling the auger to clean it out.
@GrillSergeant Жыл бұрын
Good info! Thank you! 🍻
@twotiredblackparents58724 жыл бұрын
Great job man
@ThreeWickedWonders15 күн бұрын
I got the ERL code, and the hole inside was full of pellets. There was also a lot of smoke like the pit was trying to start... but no heat. Not sure what to do here.
@nicholasboen55803 жыл бұрын
I've gotten ERL code a few times now. Last time I ran it completely out of pellets on purpose because I felt like the auger was jamming. Other than using the shopvac on the fire pot, is there anything else you would recommend before adding more pellets for another cook? Thanks for the help!
@GrillSergeant3 жыл бұрын
Have you tried sifting your pellets?
@andrewdollins23214 жыл бұрын
All great advice! Have many great cooks, on my pitboss 4 get the fines out.
@JR-gq3ww Жыл бұрын
I got Err dude.
@zacharysnapp27143 жыл бұрын
Is there any other reason for the auger to jam and throw code ERL?
@GrillSergeant3 жыл бұрын
If the auger unit got bent during shipping that can be the only other reason for a jam but 99% of the time it’s the quality of the pellets you are putting in your hopper.
@bobbertheclown29074 жыл бұрын
my pitt boss is NOT a pellet smoker and the display is err. any thoughts?
@admissionsaaron4 жыл бұрын
What about error code ERR on the KC Combo?
@josenalvarado3 жыл бұрын
Thanks for this video. 👍
@GrillSergeant3 жыл бұрын
No problem! Thanks Jose!
@cesar8ramirez Жыл бұрын
Looking for this exact digital dial replacement. Mine looks toe up. Where can I get a replacement.
@jeremybrockington64944 жыл бұрын
Ok!!!!! My brotha with the knowledge!!! 👍🏾👍🏾👍🏾👍🏾👍🏾✅✅✅✅✅✅✅👋🏾👋🏾👋🏾👋🏾👋🏾👋🏾👋🏾👋🏾👋🏾
@douglykins46443 жыл бұрын
Brand new smoker, looks like yours, not certain of the model but it is a $400 “3” series. Erh, erh, erh. Nothing in smoker, Just trying to get it functioning with pellets. What’s up?
@GrillSergeant3 жыл бұрын
Doug Lykins When you get an ErH code what temp is your smoker at and are you letting it completely cool down before turning her back on? Is your vent closed all the ways down or open all the way up?
@andrewchristensen38143 жыл бұрын
Tip for cleaning smoker/grill: learned from my wife's grandpa as he was sizing me up to approve of our marriage, put a bread pan of water into the grill while it is heating up, allow the steam to build them take your wire brush to the grid. Cleanest taste in history!
@nancyoneal18638 ай бұрын
What causes it to overheat and how do you prevent it?
@CastleHives4 жыл бұрын
Great video Andrew. That looks like a good smoker.
@walterlanglois45094 жыл бұрын
Thanks for the video i tried everything on this video but it did not work i also called pit boss no response back and i left them an email no respond back the sad part is that i only used it a couple of time and it just give me the same problem i wouldn't recommend this smoker i would buy something else
@GrillSergeant4 жыл бұрын
Sorry to hear you are having some issues with yours Walter! If you just bought it you might be able to exchange it for something else...
@bradleonard2501 Жыл бұрын
err code started today
@davidemoore1620 Жыл бұрын
How do you change out a blown fuse on the model you are standing aside?
@sprinter1442 жыл бұрын
I have 2 series 7 vertical smokers and both times I’ve used them I get the erl code immediately when changing the setting from smoke to any other temperature. To clear I unplug them, then plug them back in and turn on and select the temperature I want and they both work fine after that. I’ve read that the problem is the smoker hasn’t reached a high enough temperature fast enough. I thought I may be leaving the door open too long on startup. Any thoughts?
@cherycecampbell-davis7033 жыл бұрын
You sir, are amazing!!
@GrillSergeant3 жыл бұрын
Ha! Thanks! 🍻
@melanieslack90224 жыл бұрын
Got the ERL code, but it doesn’t come on until 300 degrees. Cleaned all the pellets out and vacuumed it, started it again and same thing, ran great til it hit 300 degrees, then it throws ERL code and shuts off???
@ELAM3054 жыл бұрын
I had the same problem they sent me a new temperature probe out I installed it it worked fine for about three Cooks. What I have noticed is take a piece of steel wool and clean the temperature probe which is located inside your smoker at the bottom it looks like a one and a half inch nipple sticking up from the bottom of your smoker
@C.Daniel1162 жыл бұрын
How did you clean your auger mine is locked up and I can't find how
@gabbybeautiful Жыл бұрын
as soon as i turn on my pit boss it automatically says 240 on smoke then gets higher from there even the dome gauage says 120 to 150 . its not hot then errors out that its hot.. by the digital reading yes. actual reading no. i have changed out the temp sensor but it did not help
@bobbyluther80744 ай бұрын
I can’t find that pellet sifter pan posted anywhere in the comments
@ruhster6663 жыл бұрын
Nice😀 what a nut😀 like your humor 😂
@austinanderson8485 Жыл бұрын
What about spl p51 that’s code I keep getting but can’t find any info about it
@daveducker26882 жыл бұрын
got a question I recently purchased the PB Brunswick smoker and after doing the first 2 steps watching your burnoff video. the problem I seem to be having is that listening for pellets to drop into the firebox. all I hear is the fan spinning with holding down the prime button for 3 minutes. I did notice that looking in a small hole in the hole motor assembly. it looks like the ignitor is lighting but the temp does not go up at all. I have tried this couple of times now to no avail.
@abelelizondo89272 жыл бұрын
Thanks for the help brother god bless
@jaysbrappingbbq8424 жыл бұрын
Soldering points on an electrical unit tends to break over time with sensor most common thing to happen
@whiskeytangobebee4 жыл бұрын
Fwd to 2:20, there, I saved everyone 2 minutes.
@maleke23 жыл бұрын
I think the problem with the overheating issues is the water pan design. I think it doesn’t allow air to circulate up and out. Will try smaller water pan
@geena2plz3 жыл бұрын
Seriously, thank you!
@stephenelliott92223 жыл бұрын
This guy likes to hear himself talk
@robertcaudill16603 жыл бұрын
I have had a temperature runaway, set temp to 350 and ends up at 400 or higher. Now I know to raise up the smokestack cover
@tgh2236 ай бұрын
i made a mistake once and bought one of these bad mistake i got tired of working on it i used it to stop a gully up worked good for the first time
@shawnblessing16293 ай бұрын
Time stamp 4:30 ERL for you that want to get to the point
@kellyseth94 жыл бұрын
I tried to use the pit boss for the first time yesterday. I did the pre burn ok but after about 5 hours I kept getting the erh code. I had water in the pan and the top was all the way up. It would start to smoke allot and then you could hear the fire just take off and flames were coming or if the fire box shield and it would over heat. The auger was still dumping pellets into the fire box. Do you know how to fix this?
@jaysbrappingbbq8424 жыл бұрын
I never get an error code on the cheaber only if I don’t got meat to cook on it
@keltaymax31332 жыл бұрын
Got a pit Boss that looks just like that except it's a sportsman model first time firing it up and doing a burn off on it and I got an er1 code though it looks like erL
@thwilkinson4 жыл бұрын
I just got mine yesterday, I have an err code. Any advice?
@tgh2236 ай бұрын
take it back u cant keep it fixed get u a propane smoker
@UncleJ44 жыл бұрын
Straight out of the box, I got the ErL code. How do I clear this?
@GrillSergeant4 жыл бұрын
Can you see if your auger is jammed? When the unit is on and the "Prime" button is pressed, do you see the auger move?
@UncleJ44 жыл бұрын
@@GrillSergeant No. As soon as I hit the power button, I get the code. I think I may have made a mistake by loading a full bag of pellets. I've emptied most of it and in the morning I'm going to run a shop vac around the auger to see if I can get anything out and go from there.
@GrillSergeant4 жыл бұрын
@@UncleJ4 A full hopper should not be an issue. I got the ErL code once before I started sifting pellets. Now I'll sift the pellets before they hit my hopper and I've had zero issues. Good luck! Cheers J4!
@UncleJ44 жыл бұрын
@@GrillSergeant Thanks for the quick replies! It is a little late to be running a shop vac right now, so I'll give it a try in the morning.
@wyattshrader28703 жыл бұрын
i just bought a pit boss austin xl and the fan won’t kick on but i took the fan off and it works just not getting power please help!!
@Weedo11842 жыл бұрын
Too many problems with Pit Boss. Ruined my day purchasing, assembling then disassembling after it failed to power on. Ruined my weekend cooking plans. Known issues by Pit Boss.