Fixing the NC Miata's Engine Bay

Рет қаралды 8,321

3 ай бұрын

Today we install a Track Dog Racing Super Cool Air Flow kit in Matt's NC Miata! Check out Track Dog's website here:
trackdogracing.com/TDR-SC-NC....
And get 10% off of your order with the promo code: Slip10
Support our channel and get some apparel at: slipanglemedia.com/shop
Listen to our PodCast The Corded Tire on ShoutEngine: shoutengine.com/thecordedtirep...
Reserve a seat with one of our webinar reviews with a chance to take home that part for free!
www.slipanglemedia.com/produc...
Purchase Matchew's Beautiful Track Photos of YOUR car!
For regular updates follow:
/ slipanglemedia
/ slipanglemedia
slipanglemedia.com
#GarageQuinnMotors
#TheSlipAngle
The Slip Angle Crew:
Quinn:
/ garagequinnmotors
@GarageQuinnMotors
Matt:
/ mazda_matchew
@mazda_matchew
Music Tracks:
"Palmtrees" by The Brothers Records
"Empire Seasons" by Dan Henig
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Пікірлер: 43

@redheadmetalhead247 3 ай бұрын

Yes. More NC content. One of the first things I did when I got my NC was to relocate the battery to the trunk, move the washer fluid bottle to the firewall, and move the coolant tank to where the washer fluid bottle was. I hate how cramped the front of the engine bay is and I hate not having easy access to the front of the engine.

@christopherlopez9458 3 ай бұрын

As a s2000 owner this series about the mx5 is great. Ive always had a soft spot for the NC. Keep it coming

@FATmenDRIVEtrucks 3 ай бұрын

NC gang gang

@does_not_matter_91 3 ай бұрын

There it is, intro music that brings back good memories in my head. You guys have best automotive channel on YT in my books. True, honest, details oriented.

@BrodeyDoverosx 3 ай бұрын

Slip angle and speed academy are two underrated channels with legitimate (they race) information. A lot of the big channels lack any actual knowledge and expertise.

@does_not_matter_91 3 ай бұрын

@@BrodeyDoverosx They are too busy recording videos about mechanic reacting to tik-tok videos.

@kidmars93swagg 3 ай бұрын

Love the channel. The super in depth stuff is where it’s at. No fluff.

@300zxdriver 3 ай бұрын

Definitely noticed that bracket sticking out a mile. Come on really?

@Chilicharger665 3 ай бұрын

I noticed the battery bracket immediately lol

@malcolmn.5222 13 күн бұрын

I think at this point most people just repeat the same lines. The NC3 is the best looking miata ever made to date. That front grill is perfect.

@wackit6756 3 ай бұрын

Quinn and Matt-Chew, I’ve been watching for years and was curious about your exclusion of ND Miata’s. I recently bought a '21' MX5 (and also have a '21' Supra) and was wondering if you focus on NB's and NC's because they are less expensive, or maybe have better balance, or are more track capable? Also, where is Ryan buried on that huge property of yours? 🤐

@ace1984able 3 ай бұрын

This series is just prefect timing, just bought an NC club and have many aspirations for it. Glad you guys are addressing the necessities before all the fun stuff. Don't know if I'll have the same level of self control.

@98luckyneon 3 ай бұрын

The quality of these videos is great / channel should have many more subscribers!! Motivated me to buy a Miata as a weekend car lol

@bluedog2367 2 ай бұрын

Thanks for these great videos guys. 95% convinced I want one of these. Appreciate all the hard work 🤙

@davidmccaughan2710 3 ай бұрын

Sticking out like a sore thumb at 15:25! Awesome video, Track Dog stuff is top notch 👍

@antonyingram 3 ай бұрын

That's made a heck of a difference to the engine bay, so much tidier. Hopefully it's just as effective for temps on track too.

@ftovr2957 3 ай бұрын

I learnt the hard lesson of cooling turbocharging an NA car 😅 Sometimes the OEMs compromise for packaging, but sometimes (re: ducting and undertrays) it pays not to throw it out!

@PyroPlays 3 ай бұрын

Excited to watch this one :)

@neilobusk 3 ай бұрын

Old dudes on Miata`s.. love it.. They are great if you have one freind and never go shopping..... Thought Matchew had a Toyota for a daily... ? Is a car that requires a few mods...to be better... not better than a car that needs lots...of mods..to be better.(I think) love Matchews enthusiasm... love the massage parlor background music... 😛😛 N x

@wg5768 3 ай бұрын

Wow,aftermarket parts that actually come with good printed instructions. Who knew someone could do that?

@stevecrawford7814 3 ай бұрын

Ha I was wondering right before you mentioned it. Strange long bracket.

@ericjanssen7806 Ай бұрын

So- outstanding. Love it. Question: still have to remove bumper to service air filter, correct? I have the Cal Comp AEM on my nc1 and that is my situation. Thanks-

@NVIDIAguy343 3 ай бұрын

Make sure your radiator is foamed. Look up the Spec MX5 allowance for a cutout near the firewall/strut bar brace area. Or go full hog and put on some hood vents. The OEM oil heat exchanger has proved sufficient for me so far for non-race applications. Also look into Spec MX5 PS flow restrictor. Slightly higher effort and less work for the pump to do.

@Creez473 3 ай бұрын

one of my new fave channels. What is the diameter of the cold air? Cant find info on appropriate diameter for it anywhere... Just "get AEM, Stock is a CAI, Skuzle" lol

@richardcottam441 3 ай бұрын

Greetings from the UK. Thanks for the video! That kit looks cool, anyone know if they have UK stockists?

@777MAV 3 ай бұрын

Under the hood it's basically RX8 with bigger engine.. thinking to do the same to my track rx8 now...

@tnutss Ай бұрын

Does the moroso tank give you coolant level sensor as well? Looking for options for my rx8

@emncali 3 ай бұрын

can you guys give a mod list for ur NC? I saw it in the comments a while back but cannot find it anymore

@dielaughing73 Ай бұрын

Ah crap, this kit moves the washer bottle right where my brake booster is (RHD car). Do you know if there's a RHD version? BTW what wheel and tyre sizes are they, and how is the fitment?

@FreshYoungDude 3 ай бұрын

I was super disappointed by the lack of induction noise after installing a cold air. Stupid plastic intake manifold! Anxiously awaiting Fab9’s high flow aluminum release. Supposedly spring/early summer…

@shifty3583 3 ай бұрын

The first production samples are headed our way. There were a few delays on our manufacturing end, unfortunately. Once we've got those parts in hand, we've got to validate fitment etc before we give the go ahead for the first production batch to get made. I'm guessing we're looking at June / July to have those available at this point.

@FreshYoungDude 3 ай бұрын

@@shifty3583 I can’t wait. Any idea on price range? Ballpark at least ?

@sixspeedcooper 3 ай бұрын

I’ve been on the fence about this kit simply because my car is strictly dickly for the street, but it opens up the engine bay pretty nicely and makes it so much easier to get to that belt tensioner that this is most likely my next purchase. Thanks for posting, loving the series so far.

@shifty3583 3 ай бұрын

@@FreshYoungDude Probably right around $1000.