What's the Best Sounding NC Miata Exhaust?

Рет қаралды 1,873

25 күн бұрын

Get a Strap ⬇️
superautomotiveaccessories.bi...
I've compiled all the exhaust clips I have for NC Miata owners to review and decide what the best sounding muffler and exhaust is for YOU! Over the years I've had 7 different exhaust set ups with varying volumes and tones, which one do you prefer?
Support the Channel for just $5 a Month - / coloredinlight
SUBSCRIBE - bit.ly/2IHFZcj
FOLLOW COLORED IN LIGHT:
INSTAGRAM / coloredinlight
FACEBOOK / coloredinlight
ABOUT COLORED IN LIGHT
Jackson Ralston, or known here as Colored in Light, is a video creator and car enthusiast based in Texas. On this channel, I regularly post videos about my Mk7 GTI and 2.5 Swapped NC Miata in how-to, vlogs, builds, car meets and events, etc.
THE MOD LIST
NC Miata: All Products and Links - bit.ly/3UmVOgz
Mk7 GTI: All Products and Links - bit.ly/3SAGkEj

Пікірлер: 31

@Alxdr01 23 күн бұрын

I run a Tomei axle back with a Goodwin 1.8 header. Sounds crazy

@pete67aus 21 күн бұрын

GWR 1.8" Max Power ceramic coated header, stock mid-pipe with new O2 bungs welded in (one before cat and one after), Roadster Sport SuperQ Muffler. Stock 2.0l 6 speed NC1. I am in my late 50s and I don't want anything too loud. I can cruise along at highway speeds or around town and it is never obtrusive. However, once I put the boot into it on a winding road, the noise level increases and I think it sounds great. The header was a fairly recent addition and I am amazed at how much more power the car seems to have. It revs out more easily and has more go right across the rev range. Just what I was after for a bolt on upgrade.

@ColoredinLight 21 күн бұрын

You should really get a tune with that header and you'll be even more surprised

@funkingitup1805 23 күн бұрын

Cant wait for that turbo kit! Kraken will sell you a turbo manifold with inconel studs and a downpipe for $1100. The community so badly needs someone to document it. It's the same manifold and downpipe as the Fab9 GT Turbo kit. Favorite exhaust setup: Kraken turbo manifold and downpipe: $1100 2871 turbo: $1300 (or $600 Chinacharger) Oil and water lines $200 CX Racing intercooler: $400 Miscellaneous intercooler pipes and fittings $300 Battery relocate $200 Turbosmart BOV: $300

@rollaevo99 19 күн бұрын

Jackson , I'm liking the last one......thumbs up!!

@ColoredinLight 13 күн бұрын

Thanks!

@rhussain110 22 күн бұрын

This is the best NC Miata exhaust comparison video out there. It helps you have experienced all these options.

@ColoredinLight 22 күн бұрын

Yea it's been super fun revisiting all the different sounds. I need to experience turbo sounds now. Thanks man!

@rickhunter8444 23 күн бұрын

Great video. I built my exhaust backwards. I started with the GWR Helmholtz Race single on a stock manifold and midpipe. Then I went ahead and did the GWR 1.8 ceramic coated header and a 4" Helmholtz midpipe later on. I can swap a muffler or a midpipe and not lose the Helmholtz effect. It's tuned and loud and I love how my car sounds, but it does have it's mysteries. I've had the sound cut completely out a few times on me while running high octane fuel at higher RPM's, no one can explain it. No damage to anything, no exhaust leaks, the sound just disappears. Turn it off and back on again and the sound is back. It's the weirdest thing. I think it has to do with the exhaust gas flow, but I'd be happy to hear what others think.

@ShiftyIntentions 23 күн бұрын

Also, my current setup: -Roadstersport 1.8 Catless Header -OBX Dual-Resonated catless Midpipe -Custom Axle-back based on a Goodwin helmholtz Race-single design…with Vibrant Ultra-quiet resonator and a 4” blast tip. Sounds killer, but definitely louder than most would prefer.

@funkingitup1805 23 күн бұрын

Gooodwin 1.8" header, stock midpipe, Roadster Sport II. I've got a 2.5" straight midpipe, but I'm going to get a 5" Magnaflow cat welded in with a 20" resonator from Vibrant. Too much drone for me without a resonator, and on a convertible I like a catalytic converter.

@nuketube2650 23 күн бұрын

Nice vid man. On my 2008 PRHT I have a GWR Street Header (w/ cat), OE mid pipe (w/ gutted cat & OE resonator), and GWR Super Q Muffler (have not tried w/ baffles). Although having the AEM CAI really completes the sound by enhancing intake and motor sound quite a bit. Sounds amazing to my ears, deep with minimal drone and plenty of grunt. Also, has a hint of raspy when accelerating hard.

@ColoredinLight 22 күн бұрын

Thanks for watching!

@specracer28 23 күн бұрын

I can't thank you enough for this vid. I've been eyeing the Goodwin sports single for a couple years now I was worried it would be too obnoxiously loud. My NC's mostly stock except for a Short ram intake

@funkingitup1805 23 күн бұрын

Ive got a header and the RoadtserSport 2 outlet. It's pretty subdued. A stock John Cooper Works Mini sounds crazier stock. Now going to a catless midpipe without the resonator would be a drone disaster.

@ShiftyIntentions 23 күн бұрын

Goodwin Race single sounds amazing with stock Midpipe and header. The ISR Muffler Delete also sounds super good with stock header and midpipe.

@fernandoguerrero5333 23 күн бұрын

I have the following on my 2012 6MT PRHT and love it: GWR RoadsterSport Max Power ceramic-coated 1.6 (cat-less) header GWR RoadsterSport Helmholtz mid-pipe GWR Super-Q Exhaust I also did an Ecutek RaceROM tune with 93 octane. It has a nice sporty exhaust note at idle and does get a bit loader when I step on the gas but otherwise don't get the drone at cruise speed. I highly recommend it.

@ColoredinLight 22 күн бұрын

That's a solid set up!

@EarrGasmm 23 күн бұрын

I have the FAB9 GT turbo kit with the tomei axleback, a stock midpipe, and the tomei axleback. Sounds amazing to me, definitely very loud. Big backfires and pops and crackles.

@ColoredinLight 22 күн бұрын

I bet it's awesome

@ShiftyIntentions 23 күн бұрын

We had a pretty similar progression. I also tried the ISR muffler Delete (mine was such an old version that it still had the old brand name “ISIS” on it 😂). I tried that with the Goodwin Max catless header and a fully straight Racing Beat midpipe… I made it down the street and back before swapping back lol.

@ColoredinLight 22 күн бұрын

Lol I remember ISIS

@andrewjdm9523 23 күн бұрын

Yonaka axle back exhaust with the high flow midpipe from Goodwyn racing.

@ColoredinLight 23 күн бұрын

Nice! I'll have to check it out

@thomas20021234 23 күн бұрын

i am running obx header + amuse r1 titan + mid resonator delete

@ColoredinLight 22 күн бұрын

I haven't heard of that muffler before, I'll have to look!

@thomas20021234 22 күн бұрын

@@ColoredinLight very good sound

@thomas20021234 22 күн бұрын

@@ColoredinLight ig you already

@youmongrel 13 күн бұрын

I got the Cobalt twin pipe, I love it. Growls and aggressive cold start without being an obnoxious neighbor. Recorded my first cold start here kzfaq.info/get/bejne/gJ6XfLJksNPYmn0.htmlsi=yunv0wqpCaG6eY67

@72hermit 21 күн бұрын

I liked the sound clip with the RSII best. My setup is a tuned 2.0, 1.6" long tube header, matching 2.5" mid pipe with 5" high flow cat and resonator deleted (big mistake to delete, drone), into a Cobalt muffler. kzfaq.info/get/bejne/mrlne9djnNaVaWg.html