Flange Flatness Measurement using the Easy-Laser E920
Рет қаралды 6,560
3 жыл бұрынThe video demonstrates how to use the Easy-Laser E920 Geometric measurement system to measure flange flatness. Whether its a pump flange or wind tower flange, you can use this system to measure easily and accurately within a tolerance you choose.
@rubenvanaudenaerde7781 11 ай бұрын
thank you, Much clearer as the manual. Many thanks👍
@ShaileshRajRawat-2024 3 жыл бұрын
Sir you explain very well🙏
@AlphatecEngineering 3 жыл бұрын
Excellent info! thanks for sharing it.
@user-ve5pc8qy2s 6 ай бұрын
hi how are you i am from Uzbekistan where can i get this tool
@allrounderriyas3414 Ай бұрын
Hello Anybody Please Reply Me How Actuals I mean Absolute Values Are Converted Into Best Fit All Around ... What the difference and how should it calculate byself ...
@felipedejesusandrade4322 2 жыл бұрын
Once you have setup the "reference plane" what is the range of deviation you can measure, for example if one point is to way up or down and the laser is out of fiel of the receptor?
@BENCHMARKPDM 2 жыл бұрын
Hello Felipe, if you set up the lasers roughly into the center of each detector surface, and with it being a 20 x 20 mm detector surface area, you should have approx. 10 mm range in every direction to ensure the beam stays in the detector.
@user-ud6zw9ot2t 8 ай бұрын
do you have to rotate it by hand? isn't it motorized? Thanks!
@krzysztofhauke8302 2 ай бұрын
Unfortunately, the manufacturer did not produce an automatic version
Hamar Laser Instruments, Inc.
Рет қаралды 6 М.
Bryan Howard
Рет қаралды 99 М.
Hamar Laser Training & Support
Рет қаралды 4,9 М.
Skillbox Программирование
Рет қаралды 744 М.
lev89k
Рет қаралды 2,2 МЛН