Flange Rebushing - Piano Tuning & Repair I HOWARD PIANO INDUSTRIES

Рет қаралды 21,480

Күн бұрын

👉Get your free video series on how to tune your piano here:
www.howardpianoindustries.com...
Flange Rebushing - Piano Tuning & Repair I HOWARD PIANO INDUSTRIES
Replacing the felt bushings in a piano flange can seem like a difficult task. With the right tools and instruction, it's not such a daunting thing to accomplish.
The parts and tools used in the video can be found in our online store at the address below.
👍 An easy way to find past videos along with products and tools tested: www.howardpianoindustries.com...
👉 Click here to subscribe: / howardpianoind
🎥 Video Chapters
-----------------------------------
00:00 - Intro
00:43 - Removing The Center Pin
01:04 - Cleaning The Center Pin Hole
02:15 - Flange Bushing Cloth
05:15 - PVC-E Glue Application
06:58 - Putting In The Center Pin
08:16 - Cleaning the Felt Cloth
⏩ Links and Resources:
-----------------------------------
✔️ Piano Center Pin Extracting/ Repinning Tool
www.howardpianoindustries.com...
✔️ Key Bushing Cloth
www.howardpianoindustries.com...
✔️ Piano Center Pin Case - Pre-filled
www.howardpianoindustries.com...
✔️ PVC-E Glue
www.howardpianoindustries.com...
👉 Follow Us & Stay Connected
-----------------------------------
☑️ Piano Parts, Tools, and Accessories
www.howardpianoindustries.com/
☑️ Facebook Link:
/ howardpianoind
☑️ Instagram Link:
/ howardpianoind
☑️ Pinterest
/ _created
👉 Disclaimer (this video is only for entertainment purposes comment)
#pianoflange
#flangebushing
#feltbushings
#painotuningrepair
#howardpianoindustries

Пікірлер: 33

@anthonyromano6761 6 жыл бұрын

I haven't done any rebushing in years and now I have an action that really needs it. Thanks for a great refresher course! Awesome!

@jaybird4093 4 жыл бұрын

Thank you, so much! Great video!

@sgtpetter101 5 жыл бұрын

Very helpful. Thank you

@pkikon6983 5 жыл бұрын

Thank You - Very well presented -

@caimano655 10 жыл бұрын

BELLISSIMO VIDEO-TUTORIAL!!! COMPLIMENT MY FRIEND Saluti Saverio

@alexandrevia 3 жыл бұрын

Very good!!!

@DustinAdams 7 жыл бұрын

useful video thanks!

@mergeband Жыл бұрын

If you replace pin do you rebush it too ?

@notmuchwear 4 жыл бұрын

Hi. That's a beautiful tutorial. Thank you. Can you tell me please the thickness of that felt bushing matetial (in mm) that you use and where can I get it from?

@howardpianoind 4 жыл бұрын

Here is a link to where you can purchase the flange bushing cloth: www.howardpianoindustries.com/piano-flange-bushing-cloth-sheet-of-12-strips/

@jabusenb 2 жыл бұрын

Hello! Your videos are awesome! I am rebuilding some of the action out of a 59-60 Everett spinet piano. The part here where you say to put the center pin in to clamp the felt, I’m a little lost on. Not able to see very well how you’re doing that. Could you explain that part a little more? I used a broach on some of the hammer butt flanges that we’re sticking, and one came out.

@howardpianoind 2 жыл бұрын

Yes, you simply insert the center pin using your center pin punch into, and all way through, both of the newly bushed flange holes. This is temporary. The pin helps to "size" the felt and clamp it into place. When it has dried the pin is removed, felt trimmed out of the middle of the flange, and you now re-pin the flange to the hammer shank using the final proper size pin. Hope this helps

@jabusenb 2 жыл бұрын

@@howardpianoind yes sir. Appreciate your advice. Thank you! Do you typically just use one size smaller pin than the permanent for the temporary?

@myuncle2 5 жыл бұрын

can you use cotton instead of felt?

@gaintrustforyou9255 5 жыл бұрын

hey great video, what kind of adhesive would you recommend as for gluing the felt to plastic flanges?

@howardpianoind 5 жыл бұрын

The PVC-E Glue would work for the plastic flanges as well.

@johnstaf 9 жыл бұрын

Should the pins and bushings in the whippens have the same resistance as the ones for the hammer flanges? Thanks for an amazing channel!

@howardpianoind 9 жыл бұрын

Hi John, Thanks for watching! Yes, the whippen flange pinning should be about the same resistance as the hammer flange. Please feel free to let me know if you have other questions.

@profeluisegarcia 4 жыл бұрын

GRACIAS¡ THANKS¡ Three "hurras .ups" for HPI¡

@Michael127gerard 3 жыл бұрын

Thank you. I find it very difficult to tear off a thread from the cloth, do you cut it first to get it started before pulling ? Or perhaps cutting would be easier ?

@howardpianoind 3 жыл бұрын

Yes, sometimes you have to cut a little bit to get it started.

@JonArgencam 3 ай бұрын

Hello, is there any tool to do this job? I need to make a lot of bushing. Thank you

@howardpianoind Ай бұрын

Not that I'm aware of, thanks for watching!

@dr.johnbrunn1550 10 жыл бұрын

Did you say "PVC" glue? I'd rather not deal with a glue pot, etc. I tried using a hot glue gun, but the glue cools too quickly.

@howardpianoind 10 жыл бұрын

The glue that I'm using is PVC-E glue which is a white water based polyvinyl glue. It's not something that you can get at your local store, but you can get it from all of the major piano supply companies including from our online store. Yes, I agree that using a gluepot isn't always convenient. For gluing flange bushings it really isn't practical anyways because of the fast dry time.

@dr.johnbrunn1550 10 жыл бұрын

Thanks. I just found out the same info in a piano tuning book. I'll look it up.

@tilc2k 3 жыл бұрын

How do you measure the swing tension of 3gram??

@howardpianoind 3 жыл бұрын

Using the swing test isn’t an exacting measurement as it depends on the weight of the hammer as well. It just gives a general guideline.

@914peru 10 жыл бұрын

hi why it needs to be bushing with cloth can I just put the pin with a dab of gorilla glue on both sides ???????

@howardpianoind 10 жыл бұрын

The pin needs to be able to move in the flange so you can't glue the pin in. The reason for the cloth is to make it so the pin is held snugly, but still is able to rotate.