Flashing Xiaomi electric scooter ESC board with STLINK (Non-Responsive Power Button fix)

Рет қаралды 31,704

Жыл бұрын

What to do if the scooter power button does not respond after flashing.
Here is how to flash a bricked ESC board on Xiaomi electric scooter.
Reflasher: cloud.cfw.sh/index.php/s/WHCD...
MiDu-Flasher V1.0.5 + STLINK drivers: github.com/VooDooShamane/MiDu...
ScooterHacking.org telegram chat - t.me/scooterhackingchat
Another nice telegram about scooter hacking - t.me/STLink_XAP2P
Amazon affiliate links:
St-Link_v2 Adapter amzn.to/3uKSH4w
Soldering Iron Kit amzn.to/3pJzNLA
Single Row Male Pin amzn.to/3IBlApl
No Clean Flux&Desoldering Braid amzn.to/3z4LkaQ
Isopropanol IPA 99.9% - Cleaning Alcohol amzn.to/3PlsNMw

Пікірлер: 256

@MindaugasJocionis Жыл бұрын

Thank you for taking the time to watch and comment on this video. If you enjoyed it, please consider subscribing to the channel for more content like this. If you have any questions or comments, don't hesitate to share them below, and I'll do my best to respond. For additional resources and links to the software used in this video, please refer to the video description. Lastly, if you found this video helpful, please consider supporting the channel by using the affiliate links provided in the video description. Thanks again for your support!

@TheWeednes Жыл бұрын

hi, i have a question please! i have a pro 2 vith ESC255 can i flash it with this method to downgrade it ?

@MindaugasJocionis Жыл бұрын

This is your drv version. Use "Scooter hacking utility" to identify your microcontroller STM32F-ver. 3.0 GD32E-ver. 3.1 GD32F-version 3.1 It is also written on the board itself. And yes, you can flash 3.0 or 3.1 boards, just need to check or uncheck the box in the application. 8:19 Subscribe thanks.

@user-zs4rr1jr6x Жыл бұрын

Can you please help me my scooter doesn't turn off and i cant even click on the power button so it comes flashlight it shows no battery nothing it happend when i tryed to make my scooter faster with a file by using an app please help

@mikey8852 Жыл бұрын

Hello Minda I hope you will answer me, I need help. I have a Xiaomi Pro 2, I downgraded it successfully from 158 to 134 with ST LINK V2 (Dashboard). Then I wanted to flash 129 for then install 075 for custom display. After successfully flashing 129, the display was still stuck with Lock and Bluetooth icon (but my mobile phone disconnected strangely). I stupidly turned the display off and it doesn't anymore turn on. When I press power button the red back tail blinks 33 times. I tried to connect ST LINK to the Dashboard (only 3 pin no 5v) for a write flash but it gets no connection. doing this procedure to the ESC Board will fix the Dashboard? it's the same as flashing though the Dashboard? Now I unplugged the battery hoping to find a way to unrbick my Pro 2.

@user-us2yk5pv6e 10 ай бұрын

you have 64 bit

@methone3575 28 күн бұрын

my brother, thank you so much. i recently downgraded the ble using st-link, but around a month later (which was yesterday) i accidentally flashed wrong firmware and bricked the scooter. throttle, lights, speedo and powerbutton were not working. i was really anxious, and thanks to your tutorial i saved this scooter. i do not have any money for repair shops, once again thank you!!

@MindaugasJocionis 28 күн бұрын

Glad you fixed it. Subscribe, thanks :)

9 ай бұрын

Thanks! Worked like a charm. Used it to replace the mainboard on Xiaomi Scooter Pro.

@MindaugasJocionis 9 ай бұрын

Nice, don't forget to subscribe, thx.

@Strateas44 4 ай бұрын

Thanks again for the video and the help you gave me , i was lost and i found you

@Kayahann14 9 ай бұрын

Bro you are legend!! I did it without soldering and it was very easy because of you, thank you so much

@MindaugasJocionis 9 ай бұрын

Cool, don't forget to subscribe, thx.

@GoodNuff0 8 ай бұрын

How do it without soldering?

@Kayahann14 8 ай бұрын

@@GoodNuff0 bro there is another video on this guy's channel to how can you do without soldering

@aminemooh2546 3 ай бұрын

THANK you very much , worked for MI3 error 27 & 35.

@MindaugasJocionis 3 ай бұрын

Nice, subscribe, thanks :)

@otr439 Жыл бұрын

ZROBIONE ZA PIERWSZYM RAZEM :) DZIĘKUJĘ

@MindaugasJocionis Жыл бұрын

Nie ma za co, nie zapomnij podpisaćsie :)

@tmk8774 Жыл бұрын

Thank you , gret video , great job

@MindaugasJocionis Жыл бұрын

Don't forget to subscribe, thank you. :)

@auetrithatus1048 Жыл бұрын

thank you very useful video👍

@MindaugasJocionis Жыл бұрын

Thanks, don't forget to subscribe :)

@yeisonfabianlozanoarenas6604 4 ай бұрын

Muchas gracias por tan valioso video

@MindaugasJocionis 4 ай бұрын

Me alegro que haya ayudado. No olvides suscribirte, gracias.

@shaileneexpressions9949 10 ай бұрын

i dit it!!! thank you friend

@MindaugasJocionis 10 ай бұрын

Nice, don't forget to subscribe, thx.

@overexposurevideo 26 күн бұрын

Very good video , I bricked a new PRo 2 model ( error 35 / 27 ) after downgrading a few older pro2's successfully using stlink on the dash and being to lazy to check first :-)

@MindaugasJocionis 26 күн бұрын

@@overexposurevideo Thank you, don't forget to subscribe :)

@overexposurevideo 26 күн бұрын

@@MindaugasJocionis I was already ! Now hopefully you find out how to flash the xiaomi 4 Ultra controller :-)

@hichamahmedjad906 Жыл бұрын

Thank you👍

@MindaugasJocionis Жыл бұрын

Don't forget to subscribe, thanks :)

@mikelm3005 3 ай бұрын

Merci enfin je réussi a me sortir de l'erreur 27/35 gros like :)

@MindaugasJocionis 3 ай бұрын

Heureux d'entendre. N'oubliez pas de vous abonner :)

@mikey8852 Жыл бұрын

@MindaugasJocionis Жыл бұрын

If you flashed ble129 and dashboard doesn't work, you don't need to flash esc. Disconnect the dashboard from the scooter completely. Connect 5v power from stlink to it, and do write flash. Subscribe, thank you.

@undftv 4 ай бұрын

I need help with your huge knology 🙏🏾 I just got an new mi pro 2 (04/2023 Model with v3.3 controller drv252 ble158), tried flash with st link and all, but got bricked (error 35/27) 😪, so using the st link I restored the drv and s/n to the factory default, ok worked normally again. My doubt is, if I order a kit (Dashboard and controller v3.0 drv155 ble129) I will have to change the BMS controller as well? Or just install the new dash and mb?

@MindaugasJocionis 4 ай бұрын

Write to me on Instagram and I will help you :) There is no need to buy dash or controller.

@overexposurevideo 26 күн бұрын

@@MindaugasJocionis Thnx a lot Mindaugus, I understand after getting bricked ( error 35/27 ) with the new mipro all you can do is open the scooter and flash the DRV directly using stlink correct? There is no way to do this from the app or from the dashboard correct?

@MindaugasJocionis 26 күн бұрын

@@overexposurevideo Yes you are correct, only stlink.

@dariuszdrogowski4168 28 күн бұрын

Hi i have a question. I downgrade my xiaoi mi3 using st link v2, but in xiao flasher and downG my scooter change name and now is Mi electrical scooter pro 2. I flashed (mb i used wrong zip file), but in every mode she drive 31. Its ok but the problem is: she is all the time active. I cant turn off. When i try to power off she automaticly turn on. I can pull off controler, but red lights all the time pulse. What should i do?

@MindaugasJocionis 28 күн бұрын

You used DRV for ESC 3.0. You have ESC3.3. You need a new gen DRV or shfw from the scooter hacking utility. As for the incorrectly identified scooter, it’s probably a serial number from Pro 2.0. Contact me on Instagram, we'll fix it. Subscribe, thank you.

@osamakhattat865 Ай бұрын

first of all thanks for your information My question is I have controller 3.3 and I have dashboard of 365 that have points no numbers can I flash the controller with your method

@MindaugasJocionis Ай бұрын

It doesn't matter what dashboard you are using, you can flash controller like in the video. Don't forget to check that GD32 checkbox for 3.3 controller version. Subscribe, thanks.

@ivandolar9173 19 күн бұрын

hey there at the beginning of the video seemed to be my exact same problem but after doing it, it still doesn't work, I don't know if I'm doing something wrong in any of the steps but tried two times, and nothing, everything looked the exact same way as shown in the video but no change at all. This problem appeared after I installed the wrong BLE on the scooter on the attempt of getting back to normal and got it super bricked. Please any help would be very much appreciated

@MindaugasJocionis 19 күн бұрын

If it bricked after flashing BLE, it means you need to reflash the dashboard, not the main controller. You can try following this video: kzfaq.info/get/bejne/f9yBZ9KFl9vDpps.html Just choose "write flash" instead of "downgrade". Alternatively, use the reflasher. You may also need to disconnect the dashboard from the scooter and power it on with 5V. Check the reflasher for diagrams. Subscribe, thanks

@losticedice9751 10 күн бұрын

Wich colour is lila and purple? I want to connect direkt per usb cabel, i have +- white and green

@jonesboss2880 Жыл бұрын

You have a video on flashing the dashboard of a scooter too. I just want to use scooter hacking utility with bluetooth. In which case do i need to flash dashboard & ESC. Where is the difference in their function?

@MindaugasJocionis Жыл бұрын

To flash the shfw (or DRV) from shu over the BT, you need to flash the dashboard (BLE). Of course, if in your scooter is a blocked BLE version. Mainboard (ESC) needs to be flashed only if it gets bricked for some reason. (wrong DRV flashed, or sometimes for no reason while flashing). Subscribe, thx.

@azerazer8587 9 ай бұрын

tanks.. can modified scooter turn sans aficheur

@user-cw3nb8rc9e 18 күн бұрын

Hi. I have 3 electric scooters for family members bought in 2019 and 2020. 2 x m365 Pro 1 and 1 x M365 Pro2. Once in the past I generated a FANTASTIC firmware for each of them on some russian page ( I used serial of each scooter to generate the firmware. I came to the conclusion recently that when something happens to any of these controllers I will loose my fantastic firmware, because I have no backup made. I am considering to buy ESC V3.0 M355 Pro Pro2 controller and simply clone the software od each motherboard currently in my scooters to the newly bought motherboard. How to do it in your opinion? The Scooter Hacking Utility says I can use the same serial for each cloned m365 pro. Tell me. How would you do what I wish to do? Buy ESC V3.0 motherboard (?), then connect to m354 pro with scooter hacking utility (can It save firmware to a file on my PC like you would rip a DVD?). Then, How to clone this backed up firmware onto new board from ali ? I need power in the board, so how to do it? Do I need to connect it to the battery (basically removing working controllers I have now?) or the board could work in some different way? In order to flash-clone the firmware I need power being provided to the board as I understand

@zygimantas2216 Жыл бұрын

Ačiū! 🎉

@MindaugasJocionis Жыл бұрын

Sub. Ačiū :)

@toptechboy007s Жыл бұрын

Hello why we need flashing ! i have problm My xiaomi 365 when i press star button no led blink .... I need to flashing controller ?

@patricklarsen4094 9 ай бұрын

So, i accidentally flashed a wrong file, and now the power button is acting weird. It does turn on, but I cant go into eco mode or pair it to my phone. Im guessing this is related or what? And is it worth for me to do it (i have no background in this), or ahould i just buy a new esc and replace it

@MindaugasJocionis 9 ай бұрын

Yes, this will help you. The best option is to recover your original controller. Subscribe, thanks.

@en2oh 5 ай бұрын

Any advantage over using M365downG (except you don’t need an android device)

@MindaugasJocionis 5 ай бұрын

This method is for bricked controllers. Otherwise, flashing the firmware using Android apps via BT will be much easier and faster. Subscribe, thanks.

@user-ve7it9se6w 8 ай бұрын

Just a quick question for you when I turn my scooter on the Bluetooth icon does show but when I try and connect it to the app and try to flash it is not currently letting me

@MindaugasJocionis 8 ай бұрын

Can you still ride the scooter? If this happened after flashing, then your esc is bricked and this will help. Subscribe, thanks.

@Domantyzzzas Ай бұрын

Sveiki, atsitiko dalykas mano Xiaomi Pro 2 po greicio pakėlimo failų siuntimo užstrigo ir pradejo rodyti error 10 pasižiūrėjus internete radau tokį paaiškinimą (ryšio kabelis tarp pagrindinės plokštės ir ekrano atsilaisvino) atsidariau dugna išemiau kontroleri išvaliau ekrano kištuka su spiritu, taip pat patikrinau ir patį ekrana bei jo laida jokiu pažeidimų neradau. Po to viska sudejus prijungus atgal baterija ijungus paspirtuką jis isijungė bet dingo baterijos indikatorius ir mygtukas daugiau nebereguoja, taip pat dingo error10. Tai ar padetu STLINK ar pirkt nauja kontrolerį??

@MindaugasJocionis Ай бұрын

Jei flesinai DRV ir kaskas ten nutiko kad blogai susiflesino ar netoks firmweiras, tai perflesinimas su stlinku pades. Sub. Aciu.

@Domantyzzzas Ай бұрын

@@MindaugasJocionis Jo DRV flasinau tai tikriausiai taip ir bus. Aciu uz ats 😀

@user-cw3nb8rc9e 18 күн бұрын

I wish to clone my great m365 Pro 1 firmware from motherboard on my Pro 1, straight to my pc and then clone it back to a new m365 pro motherboard (ESC V3.0). How to do it?

@orosziroland9961 11 ай бұрын

Hello! I bought a defective Xiaomi mi essential scooter used! my question is how can I reprogram the DRV to the original so that it works again? I can't find the "Essential" model in the list of the program! or which model program should it work with again? Thank you very much for the quick reply! 😁😁😁

@MindaugasJocionis 11 ай бұрын

It's Mi scooter lite; subscribe, thanks.

@MrDmitryFrolov 11 ай бұрын

@@MindaugasJocionis Is it mi lite? Is the Essential scooter not m365?

@MindaugasJocionis 11 ай бұрын

No, m365 is the first xiaomi scooter, essential is striped down mi1s . Subscrine, thanks.

@MrDmitryFrolov 11 ай бұрын

Another question is whether it is possible to flash a scooter with an analogue of ST-link ... the name is DAP-Link?@@MindaugasJocionis

@MrDmitryFrolov 11 ай бұрын

@@MindaugasJocionis?

@PMBurruchaga 10 ай бұрын

Hello. I have a mi essential with sco driver v3.3. Is valid the video method? I can´t install reflash, it asks me to install .NET core. What can i do?

@MindaugasJocionis 10 ай бұрын

Yes it will work. ESC version you need to check on board. NET Core you can get from here: shorturl.at/jxPQ5 or from Microsoft. Subscribe, thanks.

@PMBurruchaga 10 ай бұрын

@@MindaugasJocionis It's already working. thanks very much friend!! You have a new subscriptor

@erikjirous7302 5 ай бұрын

Hi, I bought a used scooter which had been flashed using bluetooth and mobile phone app. I want to change the firmware to my own but the apps show errors or flashes but it doesn't actully affect the scooter. Will this help me to be able to flash it with my mobile phone again? Thanks

@MindaugasJocionis 5 ай бұрын

In my opinion, it should work. Subscribe, thanks.

@frost-hn5yn 5 ай бұрын

According to the Scooterhacking app, it says my scooter is a mi 3 but xiaoflasher says it's a M365_3, which one is correct? Also is downgrading dashboard only enough? or do i have to do both dashboard and esc

@MindaugasJocionis 5 ай бұрын

I don't use xiaoflasher. I think M365_3 probably means mi3. If it has dashboard with numbers and blue brake caliper, then it's mi3. Yes, downgrading the dashboard BLE is enough to be able to flash the controller over Bluetooth. Subscribe, thanks.

@PureComedi 5 ай бұрын

@@MindaugasJocionisI have to correct you that that is not the case, if you only flash the dashboard, the scooter will spit an error 42 at you, referring to a BLE/DRV firmware mismatch, which blocks all flashing/connecting operations through bluetooth, so yes, flashing the ESC/controller IS necessary in Mi 3s as they are the first one where xiaomi stepped their flashing protection up.

@MindaugasJocionis 5 ай бұрын

@@PureComedi Well, I mean, to be able to flash a hacked DRV over Bluetooth, you need only to flash the dashboard with ST-Link. And yes, you are correct; if afterward, you flash an ordinary hacked DRV, you will get error 42. For Mi3, it is necessary to use a patched DRV or special BLE, or to use SHFW from the scooter hacking utility. I think SHFW is the best option; you can tweak it in real-time with the app, and it prevents you from flashing the wrong firmware. And probably, at first, it will be necessary to flash DRV003 (or attempt DRV downgrade with "scooter hacking utility") to be able to flash anything on the mainboard, but this is another story :) The first step is to flash your dashboard (BLE) with ST-Link to be able to do anything. Thanks for the corrections and help, it would be great if more people here helped others under these videos :) 🤝

@PureComedi 5 ай бұрын

Another bit of correction on the last part, we use Reflasher (it contains everything to flash drv and ble for basically all supported scooters) for that, as I said you can't connect to a scooter with error 42 so you can't really just downgrade it in SHU, and also, flashing order doesn't matter at all, you can start with the esc on the Mi 3 if you want to, it won't matter, either way im not trying to be offensive or anything just want to get things straight based on experience.

@MindaugasJocionis 5 ай бұрын

Strange, I have a mi3, 2 years ago I flashed an unpatched drv, got error 42, after that I was able to connect to it via Bluetooth without any problems and flash it. A few guys have also done this successfully, just by downgrading the ble. Maybe something has changed, no idea. Anywai in worst case you can flash it with stlink. :)

@Extra-yb2bd 5 ай бұрын

What is The Use of Downgrading the Controller? Isnt downgrading the Dashboard enough? I mean What upgrades it alows?

@MindaugasJocionis 5 ай бұрын

Yes, downgrading the dashboard BLE is enough to be able to flash the controller over Bluetooth. This is for those who bricked their controller when flashing the wrong firmware, or they bricked it somehow else.

@Extra-yb2bd 5 ай бұрын

@@MindaugasJocionis Ohh Ok Ic Thanks Man Those Video r really Helpful. I got sad when i came to know That I cannot Flash Firmware. Later i got Those Videos. I have Ordered STLink V2.

@carlosmanuellopezcastaneda1000 Жыл бұрын

Hola.Se intento deslimitar un S1 que tenia BLE155 y ESC 3.1 por bluethon y ahora no encide. 1.- ¿ que está bloqueado, la pantalla,el ESC, los dos?. Que se puede hacer en estos casos:¿ soldar STLINK en pantalla o en ESC ?

@MindaugasJocionis Жыл бұрын

Probablemente hayas bloqueado tu ESC, este video muestra lo que necesitas hacer. Revisa tu mensajería, te escribí, y no olvides suscribirte, ¡gracias! :)

@rambydecena9143 Жыл бұрын

I have mi essential and flashed a wrong firmware, now the controller freezed up. Tried to unplug and plug the batt conmector and still same issue. Please help. TIA

@MindaugasJocionis Жыл бұрын

You bricked esc controller. This video shows you what you need to do. Check the video description for tools you need. No worries it's fixable. And don't forget to subscribe, thanks.

@alienmodz1210 10 ай бұрын

Do you no where I can buy the paper thing off the back off the ESC

@MindaugasJocionis 10 ай бұрын

Might be something like this: amzn.to/3t84xri Adhesive Insulation Paper. Designed to isolate battery packs from the case.

@unokegioca900 11 ай бұрын

I accidentally removed the sticker with the serial number, is there a way to reflash the firmware without it?

@MindaugasJocionis 11 ай бұрын

Use one from the internet, there are plenty of them :) Subscribe, thanks.

@hammarbyar 7 ай бұрын

I did exactly as shown. The progamm even said all done. Put everything togather and no change from before. So i plug the st link back into the computor to redo it all but now my computer dont recognize the st link anymore and wont show it

@MindaugasJocionis 7 ай бұрын

Try to ask in this telegram chat: t.me/scooterhackingchat Subscribe, thanks

@123123jonasthe 11 ай бұрын

hello. I really hope you can help. I got a mi 2 pro, and bought a m365 pro display with Good ble to unlock speed. Something happend in the flashing, and know both display are saying error 35 and sometimes 27. Do you think a stlink will be able to fix the problem.

@MindaugasJocionis 11 ай бұрын

You flashed firmware that is made for ESC (mainboard) 3.0 and your's is 3.1. Do as in this video and it will be running again. Subscribe, thanks.

@123123jonasthe 11 ай бұрын

Thanks. After I do like u in the video, will I then be able to flash custom speed with the original dashboard 157 ble or should I still use the new dashboard I bought with good ble? I will subscribe

@MindaugasJocionis 11 ай бұрын

No, you only will unbrick esc. To be able to flash custom firmware to mainboard (esc) over bluetooth with original dashboard, you need to downgrade ble (dashboard firmware) like in this video: kzfaq.info/get/bejne/f9yBZ9KFl9vDpps.html Or use a purchased dashboard.

@123123jonasthe 11 ай бұрын

So the new display I bought from a 365 pro with good ble will just brick it again? Maby I wrote it a bit unclear, but a have already bought a display from a 365 pro with good ble (my scooter is a 2 pro) So if I unbrick like in your video, will I then just brick it again with the display from the 365 pro? And again thanks for helping, you are great

@MindaugasJocionis 11 ай бұрын

If you flash the firmware for a new type of controller, it will not be bricked. The problem was that you flashed the wrong firmware. The best option is to install shfw from the "Scooter Hacking Utility" android app. SHU recognizes the version of esc and flashes the correct one. More info anf help you can find in this telegram chat: t.me/scooterhackingchat

@g0m990 Жыл бұрын

This method works for xiaomi essential error 27?

@MindaugasJocionis Жыл бұрын

Yes, this will help. Tho first try this: "Fix DRV Brick without ST link: (by VooDooShamane) Switch on and hold the scooter with the brake pulled Switch off the scooter with the button Keep the brake pulled Switch the scooter on again Connect to SHU (SHU-scooter hacking utility - app from the Android market) Vanilla DRV247 (load from Repo) flash When Flash starts, release the brake The brake must remain permanently applied at all times. It may and must only be released when the flash process has started. " And don't forget to subscribe, thanks.

@rafag6613 Ай бұрын

Hello friend, I can't deal with error 22 in pro 2. The scooter only works on drv247, if I change it to any other, error 22 appears. Is there any solution to this problem?

@MindaugasJocionis Ай бұрын

No idea, try to ask in this telegram chat: t.me/scooterhackingchat Subscribe, thanks.

@wiilu0073 10 ай бұрын

Hello, i have a problem Esc v3.0 (same as you) and all is soldered and connected like the video but i don't get the green light only the red shows up and the ReFlasher program on the pc say "couldn't connect to st-link" What should I do? Thanks if sb can help me !

@MindaugasJocionis 10 ай бұрын

It means that st link is not recognized by pc. Did you installed the drivers? Might be bad port, extension cable etc.

@wiilu0073 10 ай бұрын

Ok i will try on another pc tomorrow

@wiilu0073 10 ай бұрын

Ok i installed the driver now, but it still doesn't work but now the progran say "couldn't connect to target" 🤦

@MindaugasJocionis 10 ай бұрын

This indicates that STLink cannot establish a connection with the board. Please review the soldering and wiring connections to ensure they are correctly attached to the designated pins.@@wiilu0073

@wiilu0073 10 ай бұрын

I'm quite sure that the solders are properly made cause I've checked with a multimeter.

@donbatallones3152 Жыл бұрын

Why can’t connect on new version of DRV the stlink always say target not found

@MindaugasJocionis Жыл бұрын

What do you mean by "new drv version"? New motherboard version (ESC3.1)? If so, you need to check the "GD32" box. Usually "target not found" means poor soldering or incorrect wiring to the stlink. Subscribe thanks.

@Malagueto Жыл бұрын

Podrias hacer un video sobre como donwgradear la bms?

@MindaugasJocionis Жыл бұрын

Lo siento, (con stlink) solo si alguna vez tengo un BMS bloqueado. Si no está bloqueado, puede degradarlo a través de Bluetooth. ¿Por qué necesitas eso? Tenga cuidado si flashea un BMS incompatible, se bloqueará". Aquí hay un tutorial sobre cómo hacerlo: cloud.scooterhacking.org/topol/Guides/M365_BMS/Guide.pdf Suscríbete, gracias.

@Malagueto Жыл бұрын

@@MindaugasJocionis solo era por saber como hacerlo, pero cierto hay que tener cuidado, mucha gracias🙌🏼

@marcionogueira5086 Жыл бұрын

I've done it all and when I connect to pc to flash it turns on red light on it but nothing happens I can't flash it. Thank you

@MindaugasJocionis Жыл бұрын

What does the reflasher log write?

@mikromike8827 9 ай бұрын

Hey mate, i have buy an used scooter in germany and i think its manipulatet an the preowner is still conectet .. Can i restore it to original with youre teknik? greetings!

@MindaugasJocionis 9 ай бұрын

It's tied to your scooter's serial number (to Mihome app), so I think it's possible, but you'll need to get an unused serial number or used and removed from mihome account. If your scooter has BLE less than 155 you can change your scooter serial number over Bluetooth with apps like "downG" etc. (there is no need to dissasemble). Subscribe, thanks.

@mikromike8827 9 ай бұрын

@@MindaugasJocionis Bluetooth conection dosent work so i dont know the BLE and display is just blinking. Thanks for youre quik answere! Edit: Also DownG dont work couse my Androidversion is to new

@MindaugasJocionis 9 ай бұрын

@@mikromike8827 So you cannot ride it? If it has bricked ESC, then this will help.

@mikromike8827 9 ай бұрын

@@MindaugasJocionis OK I'll try it soon and if it works I'll let you know😊But first of all thank you very much

@Hamas633 4 ай бұрын

I flashed my xiaomi pro 2 model 2023 and then i get code 35 and 27. I do same thing like your video and then it work. But when i use xiaoflasher to downgrade ble i get same problem. How can i fix it can you help me?

@MindaugasJocionis 4 ай бұрын

This error is due to flashing the wrong DRV to the mainboard. Probably, your mainboard is 3.1 or 3.2 with GD32 chip version, and you flashed DRV made for 3.0 STM32 mainboard. Reflash your mainboard again and use the "Scooter Hacking Utility" Android app. It automatically recognizes the mainboard model and flashes the correct firmware. Subscribe, thanks.

@Hamas633 4 ай бұрын

@@MindaugasJocionis Yes it is. So how can I get it to go 35kh

@MindaugasJocionis 4 ай бұрын

Reflash your mainboard again, then use the "Scooter Hacking Utility" Android app for shfw flashing

@Hamas633 4 ай бұрын

@@MindaugasJocionis this firmware package is not compatible. With your current hardaware. It wat i get after shfw

@MindaugasJocionis 4 ай бұрын

contact me on Instagram, I will try to help

@Blaszow 5 ай бұрын

What if I bought a used one in order to fix it and I have no serial number of the scooter? Is it going to be a problem?

@MindaugasJocionis 5 ай бұрын

Check on internet there are plenty of them :) I believe you can use random just with correct number on the beginning according to your scooter model. wiki.scooterhacking.org/doku.php?id=mi365 Subscrube, thanks.

@Blaszow 5 ай бұрын

Thank you for the quick answer, subbed and liked. Greetings from Poland

@ilbossdeimonopattini401 5 ай бұрын

Ciao mi può dire che chiavetta e grazie mille 👍👍👍👍👍👍

@MindaugasJocionis 5 ай бұрын

Per aprire il fondo dello scooter? Non lo so esattamente, compra un set qualsiasi e ne troverai uno adatto. Iscriviti, grazie.

@alienmodz1210 10 ай бұрын

Does the mi3 have to be gd32 enabled

@MindaugasJocionis 10 ай бұрын

It depends on the version of the board, if 3.0 then no, if 3.1 then yes. 8:19 Subscribe, thanks.

@alienmodz1210 10 ай бұрын

Thanks for the info brotha this is my first time they look small tomoz Ile be starting

@GoodNuff0 8 ай бұрын

any idea why it says"init mode failed" and "cannot connect to target"??

@MindaugasJocionis 8 ай бұрын

This means the st link is not connected to the controller. Is the controller original? Update stlink firmware, double check soldering and make sure that wires are connected to correct stlink pins. Subscribe, thx.

@MindaugasJocionis 8 ай бұрын

And if you are trying this without soldering, you will first need to remove the coating from the solder points on the controller. Use isopropyl alcohol, or something similar.

@GoodNuff0 8 ай бұрын

hey, ive made sure all coating is off and its all connected properly, is there any way we can message privately so we can resolve this? thanks @@MindaugasJocionis

@MindaugasJocionis 8 ай бұрын

@@GoodNuff0 instagram.com/siurbutis?igshid=MTNiYzNiMzkwZA==

@edinfific2576 8 ай бұрын

@@MindaugasJocionisDid you guys resolve it?

@TeeMuki666 Жыл бұрын

Trying to save a bricked scooter but cant seem to find the serialnumber anywhere. Anyways to find out?

@MindaugasJocionis Жыл бұрын

It's on the sticker on the base of the scooter from the side i01.appmifile.com/webfile/globalimg/scooterSave/scooter2.png Subscribe, thanks.

@TeeMuki666 Жыл бұрын

@@MindaugasJocionisThere doesn't seem to be any sticker on the side. Is there any other way?

@MindaugasJocionis Жыл бұрын

I have no idea, try asking in this telegram chat t.me/scooterhackingchat maybe there are some general serial numbers

@PrintWorx3D 5 ай бұрын

What do i do if the screws on the bottom are all weared down and wont come off

@MindaugasJocionis 5 ай бұрын

Look on KZfaq; there are a lot of videos there. Personally, I would use a Dremel to make a cut in the head, and then use a flathead screwdriver. Subscribe, thanks.

@TeamAmierliaTV 4 ай бұрын

@@MindaugasJocionissir why does my flasher not oppening and theres an error saying download .NET core then nothing happens?

@MindaugasJocionis 4 ай бұрын

@@TeamAmierliaTV Perhaps you blocked it with a firewall, or did not allow access to your network, or the laptop was not connected to the Internet. It should automatically download the mocrosoft .net core. You can do this manually, but then you will also have to manually download the drv and place it in the correct folder.

@Strateas44 5 ай бұрын

Hi my friend, i tried to flash it but now i can't connect, i press the button the dashboard opens but it doesn't do anything else, doesn't close doesn't opens light, and of course it doesn't work, if i try the dashboard method without soldering will it work? Subscribed thanks

@MindaugasJocionis 5 ай бұрын

I need more information. You flashed the wrong DRV to the motherboard, right? Are there any error codes flashing on your dashboard now? Have you flashed anything to the dashboard (BLE)? What model of scooter?

@Strateas44 5 ай бұрын

Its the xiaomi essential 07/2020 model , i tried to flash it via Bluetooth, at first i saw a AO in the dashboard and when it finished installing just the 0 of the speed, but it did not change modes or the flashlight working and even i could not turn it off

@Strateas44 5 ай бұрын

There are no codes flashing neither the scooter is working

@Strateas44 5 ай бұрын

I flashed the Drv 218 essential zip that i found online

@MindaugasJocionis 5 ай бұрын

So, you have flashed shfw. A0 means the battery is fully charged. To start riding, you need to set the throttle curve in the "Scooter Hacking Utility" app. It's strange that you can't turn it off with a button. Perhaps it's just soft brick. Try disconnecting the battery for a while, as shown in this video: kzfaq.info/get/bejne/grKZZbZj0pq5gqM.html

@vfam825 Жыл бұрын

I bought st link v2 but it cannot be recognized on my old windows 7 laptop, installed drivers and everything, will not work, only blinks red. SOmebody with clue?

@MindaugasJocionis Жыл бұрын

Try miduflasher (v1.0.5) If that does not help, try on a different port, or another pc, if that does not help, probably a faulty stlink. Subscribe, thanks.

@vfam825 Жыл бұрын

@@MindaugasJocionis thx for response, it was not faulty st link. I needed to connect it to stationary PC that provided 5v to usb. Then I didnt manage to make scooterflashing utility program to start but I solved it wit m365rec software and it worked.

@MindaugasJocionis Жыл бұрын

@@vfam825 Glad you sorted it out :)

@user-us2yk5pv6e 10 ай бұрын

you bless u recovery DRV all system work )))))) reaflesher )))))

@MindaugasJocionis 10 ай бұрын

Nice

@adri_108 2 ай бұрын

Why doesn't it let me open the app?

@aprendizdeesperista6214 Жыл бұрын

Buenos dias mi controladora es 3,3 puedo hacer algo gracias un saludo

@MindaugasJocionis Жыл бұрын

s lo mismo que para la versión 3.1 (debes marcar la casilla de GD32). Suscríbete, gracias.

@aprendizdeesperista6214 Жыл бұрын

Muchas gracias voy a intentar a por cierto ya me subscribo y tienes uno más gracias un saludo

@overexposurevideo 26 күн бұрын

coudn’t connect to target it says. all the soldering is checked leds burn on the motherboard… maybe the controller is too new . its sco driver v3.3

@MindaugasJocionis 26 күн бұрын

Check gd32 checkbox ESC3.3 is same as 3.1

@overexposurevideo 26 күн бұрын

yes i did of course, no luck

@MindaugasJocionis 25 күн бұрын

@overexposurevideo What's in the log exactly? Usually it's always a bad contact. As well try to ask for a help in this telegram chat: t.me/scooterhackingchat

@ilyaoleynikov8771 Жыл бұрын

There is zero need to overcomplicate and solder.

@MindaugasJocionis Жыл бұрын

Thanks for the comment :) Yes, it is possible to remove the coating from the board with isopropyl alcohol, connect 5V to the connector, and hold the data pins by hand. However, I'm unsure what will happen if your hand moves while the bootloader is being erased. It's nothing too complicated to solder a few pins

@T3DeathByte 3 ай бұрын

I have 1s scooter, no reaction on power button. Battery board led flashing red 3 short and 1 long time after I press reset button.

@MindaugasJocionis 3 ай бұрын

After what did this happen? Subscribe, thanks.

@T3DeathByte 3 ай бұрын

@@MindaugasJocionis its my brother scooter, he said that power on button worked only with charger plugged in for 1-2 minute, there was some number on screen, mby error Codes, but he dont remember, because scooter goes ok. One or two times i saw flashing stop signal many times. Then one morning it suddenly bricked. On bms board is smal button in corner, if i press it then got 3 short and 1 long flash. Section voltages are from 4.04 to 4.10 volts. On good battery led always must flash with blue.

@MindaugasJocionis 3 ай бұрын

If you have reset the BMS and the problem still persists, the first thing to do is check the cable connections and battery cell solder joints for cracks. For moore help try asking in this telegram chat: t.me/scooterhackingchat

@ns.762jack Ай бұрын

Qq @@MindaugasJocionis

@urnville 5 ай бұрын

will this fix error 27?

@MindaugasJocionis 5 ай бұрын

If you flashed the wrong firmware and are now getting errors 27 and 35 alternately, then yes, it will help. Subscribe, thanks.

@urnville 5 ай бұрын

@@MindaugasJocionis thanks, subscribed

@MehLife 3 ай бұрын

it fixes all errors that are not associated with hardware faults

@kornelpasztor7947 Жыл бұрын

Is there any reason instead of the green light I have red light coming up?

@MindaugasJocionis Жыл бұрын

On esc? What does the reflasher log say? Subscribe thanks.

@kornelpasztor7947 Жыл бұрын

@@MindaugasJocionis it says it can't comnect. I asked in a fb group, they said it's a fake controller so no chance to downgrade it :(

@MindaugasJocionis Жыл бұрын

@@kornelpasztor7947 :(

@wiilu0073 10 ай бұрын

Hello i have the same problem but it's an original esc (v3.0) The re flasher program say "couldn't connect to st link" but all is connected like the video and only the red light shows up. I hope there's a solution ! Thanks.

@kornelpasztor7947 10 ай бұрын

@@wiilu0073 I ended up buying another one that worked straight away from the downgrade app. The key is that no xiaomi app should be on your phone. But now I have another issue with my scooter 🤦🤦🤦🤦 Seems like the motor has giving up, if I try to go with it the front wheel starts to vibrating, it started to doing it when I was coming downhill and the motorbrake was turning on. I'm getting to the point that I might just gonna throw it away 😆🤦

@user-zs4rr1jr6x Жыл бұрын

@MindaugasJocionis Жыл бұрын

You probably have ESC 3.1, or just by bad luck bricked it while flashing. Do as shown in this video, and it will be fixed. Subscribe, thanks.

@user-zs4rr1jr6x Жыл бұрын

@@MindaugasJocionis but i cant connect the scooter to the computer like you did

@user-zs4rr1jr6x Жыл бұрын

@@MindaugasJocionis you now how i can connect to the scooter with out the power button

@MindaugasJocionis Жыл бұрын

The only way to unbrick esc is as shown in the video. It has nothing to do with dashboard, it's mainboard (esc) problem.

@user-zs4rr1jr6x Жыл бұрын

@@MindaugasJocionis damn cause its to complicated like you did in the video

@ArturMoisiiadi 11 ай бұрын

What about not original new controller??

@MindaugasJocionis 11 ай бұрын

Of course, why not. Subscribe thanks.

@ArturMoisiiadi 11 ай бұрын

Doesn't work( Can't do no BLE no ESC or DRV it says can't connect to target@@MindaugasJocionis

@MindaugasJocionis 11 ай бұрын

@@ArturMoisiiadi Oh, I thought you wanted to replace your bricked ESC with a non original one so the scooter can ride again

@ArturMoisiiadi 11 ай бұрын

@@MindaugasJocionis exactly, but the old controller also Chinese

@MindaugasJocionis 11 ай бұрын

Try to ask in this telegram chat: t.me/scooterhackingchat

@ralphsteen8302 Жыл бұрын

How do i se my serialnumber I don’t have any stickers left

@MindaugasJocionis Жыл бұрын

Search on www etc. There are plenty of them. Or on the box if you have it. Subscribe, thx.

@ralphsteen8302 Жыл бұрын

@@MindaugasJocionis Can i just use a Random one?

@ralphsteen8302 Жыл бұрын

@@MindaugasJocionis And do i need those pins you had and if that’s the case what are the name and size on them

@MindaugasJocionis Жыл бұрын

Check the video description. You can use anything that is comfortable for you to solder to those pin points. I didn't tried with random, trie asking in this telegram chat: t.me/scooterhackingchat

@vfam825 Жыл бұрын

@@ralphsteen8302 Hi, have you found serial number for your scooter? I bricked mine and have same problem

@WaveConsolas Жыл бұрын

hola buenas, tengo un essential con placa sco driver v3.0 que le deje a un amigo para trucarlo y lo a brickeado, el ble ya lo tengo reparado solo me falta el drv me podrias explicar como flashearlo ya que en el programa en la seccion Scooter no aparece la opcion de Essential, te lo agradeceria mucho

@MindaugasJocionis Жыл бұрын

Para "essential", elige "Mi Scooter Lite" en la aplicación. Suscríbete, gracias.

@WaveConsolas Жыл бұрын

@@MindaugasJocionis muchas gracias por tu atencion y sigue haciendo videos asi 👍

@Pak-zf8qk 11 ай бұрын

Hi I recently purchased a Xiaomi m365 scooter, but have trouble pairing it to the app. I have an iPhone and when I try to connect to the app, it shows up, but when it reaches the "press the power button to pair" I press the button and nothing happens. What should I do? Would reflashing the board help in this case?

@MindaugasJocionis 11 ай бұрын

I don't think this is related to the motherboard firmware. Does any error appear? If the scooter is connected to one account, you will not be able to connect it to another. But an error should appear (at least in the Android application). Subscribe, thanks.

@Pak-zf8qk 11 ай бұрын

@@MindaugasJocionis thanks for the reply. Is there another workaround such as replacing the Bluetooth chip? I bought it second hand and the previous owner said that he doesn’t have the mi home account anymore. Also, I’m on iPhone so whenever I try to connect it and reach the “press the power button stage” it just turns the light on, but no error appears.

@MindaugasJocionis 11 ай бұрын

@@Pak-zf8qk Try asking in this Telegram chat: t.me/scooterhackingchat It might be because of a clone ESC as well, who knows what was done with that scooter...

@orosziroland9961 11 ай бұрын

Hello! How to seen my scooter serial number? 😢😢😢

@MindaugasJocionis 11 ай бұрын

On a sticker on the side of the scooter deck or on the scooter box. Or from the www :) Sub. Thank you.

@ineridiziopeppe1728 10 ай бұрын

where i can find serial Number?

@MindaugasJocionis 10 ай бұрын

On a sticker on the side of the scooter deck or on the scooter box. Or from the www :) Sub. Thank you.

@ineridiziopeppe1728 10 ай бұрын

@@MindaugasJocionis i dont have the sticker, and box. what's the www? anyway i already connected mi scooter with m365dash app, I saw there is a serial number, I hope it's right

@gamer-ys5bf Жыл бұрын

Does he want these specific goodies?

@MindaugasJocionis Жыл бұрын

???

@gamer-ys5bf Жыл бұрын

@@MindaugasJocionis these cables that you show in the video with these specific colors, should I have the same ones?

@MindaugasJocionis Жыл бұрын

@@gamer-ys5bf No, of course not, the color of the cable does not matter, it is important where you connect them :) Subscribe, thanks.

@user-us2yk5pv6e 10 ай бұрын

windows 8 not working reflasher_v1.3_

@MindaugasJocionis 10 ай бұрын

I have no idea about Win8, I use Win11.

@user-us2yk5pv6e 10 ай бұрын

you have 64 bit ?

@MindaugasJocionis 10 ай бұрын

Yes, there is no 32-bit version of Windows 11

@user-us2yk5pv6e 10 ай бұрын

okey I am change windows )))) thank you my friends ))))

@amermurati2136 Ай бұрын

I wanna do this without soldering but it never connects with the controller there‘s only a red shining on it

@MindaugasJocionis Ай бұрын

Clean the protective coating off the circuit board with isopropyl alcohol and hold as steady as you can. What does the app log says? Subscribe, thank you.

@amermurati2136 Ай бұрын

@@MindaugasJocionis i did clean it already with isoproply alcohol it says couldn‘t connect target the controller shines only red i can‘t see any green light

@amermurati2136 Ай бұрын

I secured the v5 point as best I could with tape and pressed the other three pins until it glowed red and the message "Unable to connect to target" appeared.

@MindaugasJocionis Ай бұрын

What is your controller version 3.0; 3.1. or 3.3? For 3.1-3.3 you need to check that GD checkbox.

@amermurati2136 Ай бұрын

@@MindaugasJocionis3.1 and yeah i already tried it with the checkbox on

@azerazer8587 9 ай бұрын

comment piloter controller scooooooooter sans display ....