Que bom que foi útil. Não se esqueça de se inscrever, obrigado :)

first of all Thank you! I have this problem: after soldering the stl to the board properly ( and checking)... the scooter doest turn on ( the tail red light blinks but nothing)...if I disconnect the STL programmer ( even just one wire) the scooter turns on normally. I have a 1s. is that because I did not disoldered any capacitor? thanx ( I also made a video if that can help)

@@emimobile The capacitor has nothing to do with it. Try asking in this telegram chat: t.me/scooterhackingchat Post your video there, definitely someone will help you. Sub. Thx.

Cool :)

can i use this on xiaomi scooter 4 go @@MindaugasJocionis

Nice work! Don't forget to subscribe, thanks :)

Thanks for watching, don't forget to subscribe :) 🇱🇹

Cool, don't forget to subscribe :)

Taip, shu geras pasirinkimas as taippat ja naudojuosi.

Thanks for the feedback and for sharing your experience. And don't forget to subscribe, thanks :)

According to the app developer, nothing has changed with the new BLE158. Still same procedure. Sub. thx.

Nicely done :)

Thank you, don't forget to subscribe :)

Glad that it was helpful :) Subscribe, thanks.

¿Después de flasehar, ya tenía el BLE Y, DRV TODO INSTALADOo después tienes que flasehar con donwg?

@@MindaugasJocionis Hey man, great video! Gonna do this on saturday for my Xiaomi Pro 2. Quick question... at 8:22 you say the top one is the original dashboard. What do you mean by that? Original from this scooter or is that the original one I need? In other words, do I choose the first one, or the second one? Thanks!

@@nikostevens1 Original means the dashboard from xiaomi. Nonoriginal (clone from aliexpress etc.). Good luck with flashing, and don't forget to subscribe, thanks :)

where did you find this ftlink ?

Glad it was helpful, don't forget to subscribe, thanks.

Brother you still have the file? Please send it to me because it’s not available now I can’t download it

Thanks. Yes, miduflasher supports mi3 scooter. Don't forget to subscribe :)

HOW DID IT WENT?

Nice, subscribe, thanks

Cut a paper clip or something similar made from metal, or buy those pins in any local electronic DIY shop. Subscribe, thanks.

Sveikas Ignai, kaip suprantu tu lietuvis. Nieko nzn apie segway, bet pabandyk paklaust sitam telegram kanale, yra ten keli bicai kur uzsiima flesinimu profesionaliai t.me/scooterhackingchat Jei neatsakys iskarto, pakartok vis laikas nuo laiko, nes nevisada ten visi sedi o chatas gana greit sukasi. As tai zinai, turiu kelis scooterius, jei iskyla problema isprendziu ir imetu vide, o seip daug patirties neturiu :) Sub. Aciu.

Don't forget to subscribe, thanks.

@@MindaugasJocionis yes i did before

Cool. Subscribe, thanks.

@@MindaugasJocionis Already Done Thank you

Nice, subscribe, thanks.

But how

@@abrarahmed6728 kzfaq.info/get/bejne/hL-opdl4zcvap5s.html

Subscribe, thanks.

La, o kaip atsitiko kad tik isijungia, kokias klaidas rodo? Ar nauja ESC3.1 nuflesinai su senovisku DRV skirtu 3.0 kontroleriam? Sub. aciu.

There are 3 components that have firmware on them, and you can flash them separately. BLE = Bluetooth/Dashboard unit or its firmware ESC / DRV = main board/motor controller or its firmware BMS = Battery management System or its firmware Subscribe, thanks.

Any stlink, subscribe, thanks.

@@MindaugasJocionis Thanks, Sure i will ☺️

Only with the "field weakening" option from the "scooter hacking utility" app. Though I don't know the safe values to avoid burning the motor. I tried with my Mi3, reached 40km/h, and the motor was hot to touch after 2km. So... Subscribe, thanks.

Yes, always top. Subscribe, thanks.

I believe it uses SWD/JTAG debug protocol and GPIO communication interface I'm not sure that I'm correct if you are really interested in this you can ask VooDooShamane at rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/ forum.

321 is your DRV, not an ESC version. You can check your ESC manually by removing the bottom cover and taking out the mainboard - ESC (electric scooter controller) or by the app: "m365 downG " look in the UUID under Tools. If the UUID does not contain the characters FF , it is the new controller: Flashing the old DRV leads to Brick !! If the UUID contains the characters FF , it is the old controller: no problem with flashing. Even if you have a new ESC 3.1, you still can downgrade BLE as in this video, as it has nothing to do with your mainboard, it's a dashboard downgrade. For ESC 3.1 there are different DRV (still in early stages). More info on that: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/ Subscribe, thanks.

@@MindaugasJocionis Okay XiaoDash says that it's the ESC version, thank you!

Me alegro de que el video haya sido útil y hayas bajado de categoría con éxito. No olvides suscribirte, gracias :)

Hola a que ble se degrada?

@@catita790 La aplicación descargará automáticamente la versión requerida de BLE Suscríbete, gracias :)

@@catita790 ya no me acuerdo exactamente pero creo recordar que a la 126 y de ahi ya puedes volver a bajar normalmente mediante down g a la BLE 75 de camible

Sub. Thx. :)

No, this is currently only for ble unless a new version is out. Take a look at this telegram chat t.me/scooterhackingchat there are many serials in pictures. Maybe a random number after the model number would work too, haven't tried it. Subscrine, thanks.

You can downgrade BLE regardless of your ESC controller (they are on different boards and use separate firmware). As long as you have ESC3.1 you need a different DRV than those old ones, otherwise, you will brick your ESC board. Here you can build a new DRV by yourself: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651 Check this telegram chat, here you can find prebuilt DRV for new controller 3.1 t.me/STLink_XAP2P t.me/STLink_XAP2P/34 Subscribe, thanks.

Poor soldering or incorrectly connected wires to stlink. Subscribe, thanks.

Yes, I have video without soldering :) kzfaq.info/get/bejne/hL-opdl4zcvap5s.html Thanks for comment, glad that you succeeded, don't forget to subscribe.

There is no need of removing capacitor or cutting trace, stlink will connect @ lower speed. Subscribe, thanks.

Only this method to downgrade the dashboard firmware. Or you can buy or borrow another dash for temporary use for DRV or shfw flash. subscribe, thanks.

yes

Downgrade applies to the dashboard. After the dashboard downgrade, you can flash firmware to the mainboard over Bluetooth. From eBay, probably it will be a Chinese clone dashboard (unless you find the original). Some of them can be used for flashing DRV; some not. If the problem is only that your solder point came off, the wire can be soldered directly to the PCB trace. As for the pro1 dashboard, it will work with pro2, but the hack will remain on your pro1, as speed increases when you hack DRV mainboard. If your pro1 has unlocked BLE (dashboard), you can use its head to flash shfw and then swap back heads. The dashboard is like a gate that lets you flash the main controller. kzfaq.info/get/bejne/j6eVq8-o1pqboWg.html Check the video description. If you follow this video, there is no need to flash the BMS; I just showed that it is possible. Only swap heads, and flash shfw from the "scooter hacking utility". After that, configure speed curves to start riding. Hope it's more clear now :) For more info, check this Telegram chat: t.me/scooterhackingchat Subscribe, thanks.

@@MindaugasJocionis thank you for your reply, it has certainly helped clear a few questions I had. The pro 1 dashboard swap didn't work out for me but I can't remember what the issue was. I bought a new pro 2 dashboard from Amazon for £23 and was able to use the hacking utility to install the hack. It was much easier than trying to solder the tiny connections on the dashboard, so I'm glad I was able to do that. I needed my scooter to be able to accelerate from 0mph as I use it for carting dog crates at dogs shows too, and had Crufts just days away. I fortunately fixed it in time :) I still need to figure out why my pro 1 won't turn on, but I have a spare dashboard now as I also got one from ebay, so I will test that out. I tried replacing a connector for the brown cable from the battery to the controller as it looked cooked, but that didn't fix it.

Glad to hear that you fixed your scooter . 👌

Sí, funcionará en Mi3. Suscríbete, gracias.

It would be overengineering; you need to do this only once. Most people do this just by holding the connections by hand :) Subscribe, thanks.

Probably your ESC board is 3.1 with a new microcontroller (you needed a different type of DRV). You can recover your mainboard (ESC) with the stlink. Try asking this telegram chat group for help: t.me/scooterhackingchat Or this guy, he has recovery tools for ESC board: t.me/STLink_XAP2P Subscribe thanks.

I have no idea, try asking in this Telegram chat group t.me/scooterhackingchat or in this forum rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/ Subscribe, thanks.

Thank you.

Yes, it will work, you need to choose mi3 in the scooter selection option. You can check your ESC; DRV; BLE; BMS with "m365 downG " As for the ESC version: in m365 downG look in the UUID under Tools. If the UUID does not contain FF characters, it is the new controller. 3.1 If the UUID contains the characters FF , it is the old controller. 3.0 Subscribe, thanks.

You can supply power from stlink to the removed dashboard. Here is a link to a dashboard diagram. www.monopattinoitalia.it/ripristino-dashboard-xiaomi-con-st-link/ Subscribe, thanks.

www.monopattinoitalia.it/wp-content/uploads/2020/11/123236395_3680511102068578_4427937403415227943_o-765x1024.jpg

Probably yes, choose write flash instead of downgrade in the midu flasher. I believe to use shfw on m365 you need modified ble "BLE90For4dot_zipv3.zip" it can be found in this telegram chat: t.me/scooterhackingchat Subscribe, thanks.

@@MindaugasJocionis Thanks. I will try this as soon as i get the ST-Link

Encantada de escuchar que fue exitoso.

No, kill all apps on android and re-enable bt connection. Or restart your smartphone. To connect to mihome, you need to remove your scooter from the app and connect again like the first time. (this happens every time you use a third party app). Subscribe, thanks.

No, there is no need to cut or desolder the capacitor. Subscribe thanks.

@@MindaugasJocionis thanks, and off course I’ll suscribe 🤗

Did you check your ESCversion? You can check your ESC by the app: "m365 downG " look in the UUID under Tools. If the UUID does not contain FF characters, it is the new controller. If the UUID contains the characters FF , it is the old controller. I think you have that 3rd version and need a different DRV. Ask in this forum, there is a link to a web builder for the 3.1 controllers DRV, you must build it by yourself. rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651 Or ask for help in this telegram chat, this guy has already prebuilt DRV's for the 3.1 controllers. t.me/STLink_XAP2P "Scooter hacking utility" is working for support for 3.1 controllers as well, but still it's a work in progress. Subscribe, thanks.

Use V1.0.4 If you will have some issues with it, then use V1.0.5 Subscribe, thanks.

It's same board revision, so order is the same. Lock is needed, as without lock scooter will shut down automatically and cut board power.

Thanks. 👍

what to do if i didnt lock it, can i save it?

I don't have experience with these older models. If it's the original dashboard you don't need stlink, as m365 pro does not have BLE that is unflashable with BT. Follow this guide: www.monopattinoitalia.it/miglior-firmware-xiaomi-v2/ (use google translate) In addition to DRV, you will need to flash BLE that is prepared for the new DRV version. And try to ask for more help on this telegram chat: t.me/scooterhackingchat Subscribe, thanks.

Yes. BTW after BLE downgrade, before flashing DRV ,check your ESC version. If it's 3.1 you need new gen firmware. For Mi3 before flashing hacked DRV it is necessery to downgrade to DRV003 at first. After that you can flash any DRV. Subscribe, thanks.

Most people do this without soldering, just holding the pins by hand. (For this, you must clean the coating from those connection points with isopropyl, etc.). A Clone dashboard is also a good choice; use it just for flashing firmware to ESC. After that, you can switch back to the original dashboard. If soldering is a problem, I think the safest method is to use a clone dashboard just for flashing ESC. If you are considering soldering and doing this for the first time, I suggest you practice on some bad PCB from PC, etc. Usually, problems are related to soldering. (Burned PCB in soldering place, ripped off traces etc.) Subscribe, thank you.

No idea, try asking in this Telegram chat: t.me/scooterhackingchat And don't forget to subscribe, thank you.

Did you checked for continuity with multimeter 6:06 Probably a bad contact. Subscribe, thanks.

@@MindaugasJocionis yes, I did.. My st link has another schema, I am connecting them according to my schema. 2-SWCLK 4-SWDIO 6-GND Could this be a problem?

@@MrGeorgimavrov I will text you on telegram

Yes, you can flash any custom firmware to the motherboard after a dashboard replacement or ble downgrade. Whether an external battery can be used depends on the firmware used. For more information about external batteries, please contact this telegram chat: t.me/scooterhackingchat As I personally hawe zero experience with external batteries. Subscribe, thanks.

It downloads only once, if you downloaded it, then it will not be downloaded 2nd time as it is already in the app folder. You can put it manually: "If you want to flash your own BLE version, you can simply store it in the appropriate folder under MiDu-Flasher\Resource\files\BLE\App\N51822x\(Scooter)\App.bin ". files.scooterhacking.org/firmware/ For more help ask in this forum: rollerplausch.com/threads/midu-flasher-st-link-downgrade-unbrick.5399/ I did it in automatic mode... Subscribe, thanks.

Ok thanks! It worked once I stop my antivirus 😅😅

Connect to scooter with "Scooter hacking utility" app and unlock it. Subscribe, thanks.

@@MindaugasJocionis thank you so much for your tutorial. I managed to downgrade BLE, now I'm watching other tutorials on scooter hacking. Have a nice day

@@stefanxcz Check the video descriptions, as some videos are old and outdated. The easiest way to speed up scooter is with "Scooter hacking utility".

@@MindaugasJocionis yep, just made my own with Direct Power Control and it reaches 35KM/H

@@stefanxcz Nice :)

Yes, just choose your scooter model instead of 1S. Subscribe, thx :)

Yes. Sub. thx.

Try to ask for help in this telegram chat t.me/scooterhackingchat Did you soldered? Subscribe, thanks.

​@@MindaugasJocionis Yes I soldered, now I see the blinking rear light when I try to power on the scooter, thanks for response

Thanks. Subscribe!

You can use any metal that fits: paper clip, paper pins, etc. Or go to a local DIY electronic shop, there definitely you will find such or similar wire tips.

You need to flash the controller

No, there is no need to desolder the capacitor or cut its track. Subscribe thanks.

Try to ask for help in this telegram chat t.me/scooterhackingchat Did you checked for continuity with multimeter? In my opinion it's bad connection. Subscribe, thanks.

Yep I checked for continuity and it was ok. Maybe going to try again with a better solder because mine is like a cheap one XD and with better equipment for soldering.

Hi there. I had same problem. What helped to me? In Select an Action I tried to choose "3) Write Flash" instead of "1) Downgrade" and it works. Now I have BLE 134 on my Pro 2 and back my custom FW (flashed again).

Yes it's the same on BLE158. Subscribe, thanks.

Thanks a lot ❤️

BLE and BMS are independent parts. Just don't flash BMS. You don't need to touch BMS in order to achieve higher speed. BLE is your dashboard firmware DRV mainboard firmware BMS battery controller firmware As for compatibility with 2 brake lever scooter, try asking in this telegram chat: t.me/scooterhackingchat

There are no special conditions to downgrade BLE. All dashboards can be downgraded. Just do it step by step like in the video. I'm assuming you want to do a speed hack, for that you need to know the ESC version, if it's 3.0 then you're good to go. If it's 3.1, you must assemble your DRV (this is still in the early stages). Here you can find all info: rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/ Subscribe, thanks :)

​@@MindaugasJocionis Me he mirado el post que me has pasado y hay muchas cosas que no llego a comprender, ya que el traductor de Google no es extremadamente eficaz jeje. Por lo que he podido entender, mi UUID contiene las letras FF y entiendo que es un ESC 3.0, porque no veo en ninguna APP que me diga el que tengo sin tener que desmontar y poner en riesgo la garantía. De ser así (suponemos que tengo el ESC 3.0) sería hacer el downgrade al BLE y ya podría cocinar y hacer el flash simplemente con la APP Xiaoflash no? De nuevo, muchas gracias por el tiempo y atención que me dedicas ^^ ______________ ​ @Mindaugas Jocionis I have looked at the post that you have sent me and there are many things that I do not understand, since the Google translator is not extremely effective hehe. From what I have been able to understand, my UUID contains the letters FF and I understand that it is an ESC 3.0, because I do not see any APP that tells me what I have without having to disassemble and put the warranty at risk. If so (we assume that I have the ESC 3.0) it would be to downgrade to BLE and I would be able to cook and flash simply with the APP Xiaoflash right? Once again, thank you very much for the time and attention you dedicate to me ^^

@@trasto93 Yes, that means you have ESC 3.0, and yes, downgrade BLE and you can flash any DRV from your smartphone. Sorry for the late reply, didn't get notified about this one :)

Yes, mercedes edition is pro 2 with different look. Subscribe, thanks.

It doesn't matter the color of the wire, what matters is that you connect to that wire on both sides. Subscribe, thanks.

@@MindaugasJocionis Awesome i have eveything i need! i have noticed there is 2 vervions of drvier in the describtion 1.0.4 and 1.0.5 ? i have used the same in the video hoping to do this tomoroww will subscribe if works

​@@OllertonRolling This is a newer version of midu flasher with minor bug fixes. v1.0.5 -Windows 7 fix (curl) -no blt-id detection

Thank you for sharing your experience ❤ It's valuable, especially for those who will do this in the non-solder method. As for the capacitor, definitely, it won't make it worse if you cut its track (it's just a matter of warranty). A few subscribers reported that they flashed pro2 successfully with untouching capacitors. So I think it's just a matter of good contact. Personally, I practiced a few times in "Dump Flash" mode to get the feeling of needed pressure and position of the pins. After that managed to flash 2 times in a row from the 1st time. Subscribe, thanks.

Today I cut out 4 pins from an old IC solder socket and soldered that to the display board. This way I now have a permanent plug-in connection for the ST-link. Good for playing around or if you will use the board to flash other scooters etc.

@@juleol99 Very cool. Subscribe, thanks.

I have a pro 2, do I need to cut the c2 trace if I want to downgrade? I haven't tried to downgrade yet, but if I was to would I have to cut it? Thanks

No, you don't have to cut. Sub. Thx.

Dzięki za tak pozytywny komentarz. Cieszę się, że się udało. Nie zapomnij podpisaćsię. :)

Też mam BLE157. Muszę sprawdzić czy mam w skrzynce akurat ten programator. Jeśli tak to zaraz to zrobię, a jeśli nie to lipa, bo muszę zamówić i czekać.

Zamów w Polsce będzie szybciej niż czekać z aliexpress

@@MindaugasJocionis właśnie chciałem pisać, że nie mogę znaleźć żadnego, ale ST Linka chyba nie miałem, albo już dawno przesiałem, więc zamówiłem. Jutro będzie 😁

@@MindaugasJocionis ogólnie z Aliexpress zamawiam jak mi się nie spieszy i jest dużo taniej lub nie ma tej rzeczy gdzie indziej, a i tak staram się zamawiać z wysyłką tak by w maks 1-2 tygodnie było u mnie. Tutaj nie będę czekał dla oszczędności kilku złotych, zwłaszcza, że mi się spieszy

Great, don't forget to subscribe, thanks :)

Merhaba, bu yöntemi ben de yapmayı düşünüyorum lehimlemeden yapmışsınız sanırım dikkat etmem gereken bir husus var mı acaba ? Ek olarak downgrade işlemi sırasında bağlantı koparsa tekrar başa sarıp downgrade yapabiliyor muyuz?

@@BaldwinnIV lehim yapmadan doğruca üstünde tutarak yaptım. Eğer temassızlık yaparsak el titremesi vb sonucu herhangi bir sıkıntı olmuyor, programı baştan açıp daha dikkatli tutıyorsunuz. 5. Denemem civarı başarıya ulaştım

@@denizboyuna Teşekkür ederim dönüş yaptığınız için, şu an stlink siparişini bekliyorum geldiği gibi bu yöntemle yaparım, temassızlık olursa ne gibi bir sorun oluşur diye tedirgin olmuştum cevabınızla rahatladım :)

@@BaldwinnIV slow mode'a geçene kadar temas ettirmezseniz daha da hızlı olur süreç, bozma ihtimalimiz yok neredeyse yani rahat olun :)

This video is on how to downgrade BLE (dashboard) firmware. GD32E1 (V3.1) is your mainboard controller. So after BLE downgrade, you need to use DRV which is made for the 3.1 controller, or use SHFW from the 'Scooter Hacking Utility' app; it detects the controller version and flashes the right firmware

Mi scooter 3? Did you flashed some DRV? Install shfw from "scooter hacking utility" and configure it. Check this telegram chat for moore info t.me/scooterhackingchat Sub. thx.

@@MindaugasJocionis Yeah i have a Mi Scooter 3 and i downgraded it using the no soldering method and it did show error 42 but when i flashed it to install SHFW with Scooter Hacking Utility its fine now, Thanks for the great video

@@mohammadannasnadeem5281 Nice :)

You have a 2nd type of new microcontroller on your mainboard (ESC3.1 GD32F), you need different DRV. Build it by yourself rollerplausch.com/threads/neuer-controller-v3-1-bei-aktuellen-xiaomi-rollern-brickgefahr-bei-drv-downgrade-vorgehen.5187/page-6#post-67651 Or ask this guy in telegram chat, he has prebuilt ones t.me/STLink_XAP2P Subscribe, thanks.

@@MindaugasJocionis Hi, thank you for the reply. I have now built my own custom software of DRV319. I have not tried to flash it yet beecause I wanted to ask you first if it will be compatible with my currrent BMS ? I Have BMS 141. I would very much appriciate a reply, good day.

@@ANDROID204 BMS does not matter as long as you are not flashing it. BMS is a battery controller and you are flashing DRV (mainboard controller). I think this time everything will be fine. Check out this telegram chat, here you can find much more help than on my channel :) t.me/scooterhackingchat Write back about your results!

@@MindaugasJocionis Thank you so much man, I subscribed and shared your video with my friends. I now have custom firmware installed so that when I enter echomode it goes 25kmh and when I enter sport mode it does 20kmh or 15 in drive. The reason I did this is because its ilegal in my country if the scooter does more than 20kmh. So now if police wants to test my scooter they can do so in sport mode or drive and it will all be fine.

@@ANDROID204 Cool, thank you. In my country (Lithuania), the speed limit is 25 km/h, police didn't stop the scooters to check the speed :)

You can do the same without soldering: kzfaq.info/get/bejne/hL-opdl4zcvap5s.html Or after the downgrade, you need to desolder those wires 10:33 Subscribe, thanks.

Ok thanks

Check the video description, there is an amazon link to the pins. Subscribe, thanks.

Taip, teisingai. Sub, aciu :)

O reike kokiu failų fleshinant kur jųsu yra nuoroda programai ar ne?

@@ovidijusa1352 Tas miduflasheris viska auto is interneto partraukia, svarbu tik paspirtuko modeli tinkama nurodyt. Poto kai downgradinsi BLE, paziurek koks ESC kontroleris 3.0 ar 3.1 Jei 3.1 tai siti DRV kur visur pilna netinka, reik kitus naudot.

Yes, you have ESC version 3.0 so any DVR is compatible. And yes, you can downgrade the BLE version as shown in the video. As for the dashboard, if it is original, then it should work out of the box, if clone, then ask the seller. Subscribe, thanks.

Links are in the video description.

I think it's bad connection, check continuity with multimeter. Subscribe, thanks.

@@MindaugasJocionis everything checked, also continuity. I tried it on 2 computers with different cables from Stlink to Xiaomi dashboard. Hmm

@@MindaugasJocionis DONE! I´ve got it. What helped to me? In Select an Action I tried to choose "3) Write Flash" instead of "1) Downgrade" and it works. Now I have BLE 134 on my Pro 2. Great!

@marcel698 Glad to hear you got the issue resolved :) Sorry for not replying, I didn't receive notification of your previous message.

Cool, don't forget to sub. :)

Merhaba, bu yöntemi ben de yapmayı düşünüyorum da siz lehimleyerek mi yaptınız yoksa direkt olarak tutturup st-link üzerinden downgrade mi yaptınız cevap verirseniz sevinirim :)

@@BaldwinnIV lehimle denedim ama beceremedim , bende lehimsiz yaptım, ama dikkat et yaparken çok hızlı kayıyor elden en az 15 defa denedim sonunda oldu ayrıca üretim yılına da dikkat etmelisin scooterın galiba 2021 eylülden sonra üretilenlerde olmuyor bu yöntem

@@exoss Öncelikle cevap verdiğiniz için teşekkürler. 15 kere denediğinizi yazmışsınız herhangi bir sorun oldu mu acaba bağlantı kopunca? Hiçbir şey olmamış gibi başa sarıp tekrar mı yükleme yaptınız?

@@exoss Evet üretim yılı olayını anladım benim cihazım da 2021 üretimi bir cihaz UUID kontrolü de yaptım 2 tane FF ibaresi görünüyor.

It doesn't matter, subscribe, thanks.

Ok , thanks im already subscribed

Yes, Xiaomi f****d up. At least there is still an option to do that. And it's not as hard as it looks. Subscribe, thanks.

No, it's not necessary. After BLE downgrade don't forget to check your ESC version. There are different DRV for 3.0 and 3.1 boards. Subscribe, thanks.

@@MindaugasJocionis thank you! My board is not 3.1 , what is the DRV version needed for my model?

@@salvatoredanielelanzafame5067 If it's not 3.1 you can use any DRV, it will not brick your mainboard.

@@MindaugasJocionis ok thank you! I will follow your guidelines

​@@MindaugasJocionis ¿mi placa es la 2.3 v hay posibilidad de brink?