Thank you Grant!

Good day. Nice looking G1000. Does this come with the center control for NAV and radio?

There are several manufacturers of the bezel and screens. The software works the same on all the products. It does help if you have these in the planes you fly in real life.

I'll add it to our list of products for the future. Thank you!

Yes, sure. The unit works as a joystick so you can remap it as you want.

Hi, thank you. Yes, it's a very close to 1:1 scale.

Thank you and yes, we have the audio panel in works right now. We should have it in stack later in Q1

@@flightsimbuilder1 I also have a a recommendation which would be bit of an unorthodox way of doing things, but, what do you think about building this same unit without the screens and just the bezel? I have my own cockpit and currently have 2 x 15.6 inch monitor running my panels. I am highly interested in those systems, but I dont like the idea of just running G1000 all the time. If we have those as a bezel only and a cut-out on the middle instead of a monitor, I would place those bezels on my own screens,connect them, and run them by using G1000 pop out on my own screen. When I want to use steam gauges or different aircrafts, I can simply remove it from its hooks for example, and still use my other panels. Does that make sense? I currently have real pilots training on the sim I built, and I prefer to keep it non type specific, and a solution like that would suit me perfectly!

@@MyChannelForever This is actually an interesting idea and our Steam Gauges panel is built close to this implementation. It would require a different model for G1000 though but should be possible. I'll keep it in mind for the future products, thanks!

Thank you. Yes, it will works and I know many people are using it. I would advice to buy a bit more expensive adapter as I heard a very cheap one might not work as well.

@@gustan7 Any recommendations for an adapter?

Hi Paulo, the best option is to get a cheap second graphic card or activate the ports on your motherboards (if you have some available). There is another option to get a usb to hdmi adapter (which is basically a small graphics card) but I found some of them introduce a small delay but it might be just my experience.

@@flightsimbuilder1 could you please send PM

@@_PSantos Hi Paulo, the best way to contact us is via email at support@flightsimbuilder.com

Thank you! All commands are from FS2020, we just slightly adjusted heading so it rotates faster (you can change to default FS2020 as well).

@@flightsimbuilder1 awesome work! I am looking forward getting your G1000.

@@d1d1ka29 Thank you!

Have the same issue. Also I have some issue with FLC. When selecting FLC and using the UP/Down buttons they don't change the speed either UP or Down. Have contacted the seller without a RESPONSE. Bought 2 Units

@@alexsandrocaires Hey Alexsandro, I think the seller was missing part of the code in the cfg file. I did ask seller about this and he told me to put this code into the cfg file to make it work. However the button programing was in reverse so the nose up will actually bring your air speed up vs reducing airspeed and vice versa. I have been just too lazy to fix but if you read the code you can change it pretty easy! Let me know if you cant find your cfg file. I think he also said too that he is working on pushing an update to alivate all these problems. button:19=(A:AUTOPILOT VERTICAL HOLD, Bool) if{ (>K:AP_VS_VAR_INC) (>H:AP_DN) } (A:AUTOPILOT FLIGHT LEVEL CHANGE, Bool) if{ (>K:AP_SPD_VAR_INC) } (A:AUTOPILOT PITCH HOLD, Bool) if{ (>K:AP_PITCH_REF_INC_UP) } #AP_NOSE_UP button:20=(A:AUTOPILOT VERTICAL HOLD, Bool) if{ (>K:AP_VS_VAR_DEC) (>H:AP_UP) } (A:AUTOPILOT FLIGHT LEVEL CHANGE, Bool) if{ (>K:AP_SPD_VAR_DEC) } (A:AUTOPILOT PITCH HOLD, Bool) if{ (>K:AP_PITCH_REF_INC_DN) } #AP_NOSE_DN

@@Pquad01 thanks a lot for taking your time to help me out with this issue. I will try it later and if either works or not I'll drop the feedback. I'm very sure these lines will solve the problem. Thanks again

Absolutely. Our units use the G1000 from the sim so it will reflect what you have in the sim for a particular airplane with G1000

Oh goody This Trip just got expensive ! Many Thanks Now to go through all your post. Pauley@@flightsimbuilder1

Yes, of course.

Hi, as long as the sim g1000 can do it

Thank you! Yes, indeed. Is there a big flight sim shop/retailer in Europe?

@@flightsimbuilder1 We get them from various sources. The thing is your price is just right in the sense that I wouldn't build one myself. I hope you can find a good distributer in Europe; or maybe I can be yours! I have access to a lot of trainees all over the U.S. and Europe who would be interested in your product.

@@drpilotfi Great, thank you! I need to research a bit more the EU import fees and the rules, it seems quite high for the retail items imported from US for example.

Absolutely, in fact in this video we are using G1000 NXi

Unfortunately no but you can use it without plugging the screen

@@flightsimbuilder1 - if the screen isn't plugged in - how does it connect - wifi?

@@rmoore6471 sorry, I should’ve been more clear. There are 3 cables, USB, power and HDMI. You can just plug USB and not other two.

@@flightsimbuilder1 Oh ok that great.. Thx

There is MSFS bug causing drops before which was fixed but now it looks like it's back. One thing you can do is to plug these to your motherboard instead of GPU, you might need to activate them in bios.

These are FlightSimBuilder G1000 units for flight simulator. They go for about $500