Flip Windshield Install | Can-Am Defender | How To | SuperATV
Рет қаралды 20,248
Күн бұрынIn this video Braden shows you just how easy it is to install SuperATV’s flip windshield on the Can-Am Defender.
Easy installation is in the design - we send you this windshield preassembled, so you spend less time installing and more time riding. Whether you call it flip down, fold down, or something else, this unbreakable polycarbonate windshield is really two windshields in one. This is one UTV windshield you can’t live without.
Buy now: www.superatv.com/can-am-defen...
Check out more of our great products: www.superatv.com/
00:00 Intro
00:18 Tools List
00:23 Apply the Bulb Seal
01:16 Install the Lower Portion of the Windshield Frame
02:20 Install the Upper Portion of the Windshield Frame
02:56 Install the Hinges
03:39 Install the Windshield
05:27 Install the Catch
@codywalker7015 10 ай бұрын
Are the bolts/nuts on the gas struts supposed to be tightened? After I completed the install I noticed the nuts securing the struts to the brackets were not tightened at all on either strut. Is this normal? Also i destroyed my wiring harness while drilling the holes 😢
@ltf1133 4 жыл бұрын
Is there a wiper kit for it?
@bach5780 Жыл бұрын
I’m curious why not utilize the factory location for the mount rather than use anchors in plastic.
@SuperATVMedia Жыл бұрын
This kit is made to fit a few different models and not all models have the exact same factory mounting points to be able to use them.
@miker6503 5 жыл бұрын
What are the rivets connected to? What keeps them from backing out? It looked like nothing solid was drilled into when he drilled into the dash besides just plastic. Do they act like a concrete anchor bolt?
@kylesonsalla7620 Жыл бұрын
They mushroom out
@RyanSanislo Жыл бұрын
They act like a wall anchor, correct. Be VERY CAREFUL when drilling the holes. Reach your hand under the dash and be sure that you’re not going to hit your wiring harness like I did. Luckily I only hit one wire, my power steering wire. But now I need to try and figure out how to access the area under the dash so I can fix the wiring harness.
@codywalker7015 10 ай бұрын
@@RyanSanisloI did the exact same thing!!!! Now I don’t know what to do! Smh trying to figure out how to remove the dash to see what damage I’ve done
@johnthacker6284 4 жыл бұрын
I can't get the windshield to seat properly, it bows out from the seal being in the way at the top. I have tried everything.
@TheCodyw20 3 жыл бұрын
Mine is currently doing the same thing. What was your fix?
@briancoomes5506 3 жыл бұрын
Make sure you have the brackets on the right side of the window... I had mine on the wrong side and that is what it did
@davidsaucedo4795 Жыл бұрын
Is there any warranty on this. My shield is cracked and my shocks makes a crazy amount of noise
@SuperATVMedia Жыл бұрын
Each windshield carries a 1 year warranty to the original purchaser that each windshield be free from manufacturer's defects. Give us a call to warranty the item or purchase replacement components.
@JaisonHeardsr 4 жыл бұрын
Drilled holes as instructed, bit destroyed wiring harness under dash. $800 fix.
@briancoomes5506 3 жыл бұрын
What year is yours... I ordered one for mine and don’t want to have that happen to mine
@normalisntcomingback.Jesusis 2 жыл бұрын
Just got mine in the mail today came in 2 boxes and I also got the wiper for it..I'll be taking it to my dealer to install to avoid that and other issues..let me know how the windshield is holding up for you
@codywalker7015 10 ай бұрын
I did the same thing!
@codywalker7015 10 ай бұрын
Do you know exactly what wires were messed up? Mine are up a real small wire lume, so far everything is working fine, starts up and drives and all lights work. Not sure what it could be
@joshsmith164 28 күн бұрын
Quite possibly the dumbest thing I've ever bought for my can am. Save yourself the head ache and frustration and buy a normal windshield
@SuperATVMedia 7 күн бұрын
This windshield isn't everyone's cup of tea, but it is super versatile for most riders!