Flipsky Dual ESC FT85BD DIY ESK8 and Parameters Settings via Remote VX4 Detailed Tutorial
Рет қаралды 799
3 ай бұрынVoltage: 4-20S
Current: 200A
1. Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways.
2. Programmable via Flipsky remote controller VX4 (firmware version: VX4_V1.2.1 or above).
3. Supporting motor FOC with low working noise and smooth starting.
4.Supporting Real-time data and fault alerts.
5.Supporting adaptive variable PWM frequency control.
6.Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).
7.Supporting control types: Current, Duty Cycle
8. Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.
9.Integrated smart switch function: supports sliding poweron and automatic shutdown function; automatic shutdown time is adjustable via Flipsky ESC Tool.
12.Supporting extra interface like front lights, brake lights and horn fixtures.
e-mail: flipskytech@outlook.com
flipsky.net/collections/non-vesc
Follow Us On Social Media, thanks!
/ flipsky_tech
/ flipskytech
#flipsky
#vesc
#escs
#diyesk8
#flipskytech
@DanielKreimendahl 5 күн бұрын
Before mounting the headlights, make it difficult to rip the wire out of it. 1) Unscrew the back cover where the wire comes out of it. 2) Tie a knot in the wire positioned just barely outside the assembly, or further along if you wish to shorten the wire without losing any of it. The knot needs to be on the wire between the headlight and the back cover of the headlight. 3) Screw the back cover back on the assembly. The knot should be inside the headlight assembly, very difficult to tear out by accident.
@Gmo_gags 2 ай бұрын
Hello! Awesome stuff! Quick question? Which vx4 version should I get for this esc? The vesc4(focbox) or the vesc 6 version? Thanks for the help!
@FlipskyTech 2 ай бұрын
V6 with 8pins UART wire. Thanks.
@Gmo_gags 2 ай бұрын
@@FlipskyTech Hi! So I bought the Ft85BD ESC and the VX4 v6 version and the remote came with 8 pin UART connector, but the ESC came with a 7 pin connector wire. Can you guys send me the 7 pin Uart wire or * pin Connector that fits? I can't get a read on battery percentage, power, speed, or any stats. Everything works, just no stats. Please help as soon as possible! Thank you guys!
@Gmo_gags 2 ай бұрын
Hi again! Forget my last comment please as I have found a work-around. I managed to find another connection that had an 8-pin male end that I was able to de-pin and re-pin with the needed wires. I wished I didn't have to do that, but overall, still works. Thanks again!
@FlipskyTech 2 ай бұрын
@@Gmo_gags Thank you for your great support. Please provide the wire pictures and ask for aftersales by sending e-mail to our service team fs_service@flipsky.net. Thank you.
@FlipskyTech 2 ай бұрын
@@Gmo_gags Thank you for your information. Please send the e-mail to our service team if any support needed. Thanks.
@kessil8088 Ай бұрын
Hello, is it possible to use this controller with the kugoo g1 scooter, which has 2 wheels of 1000-2000w each with a 52 volt battery?
@FlipskyTech 5 күн бұрын
Yes, the controller can use with this scooter.
3 ай бұрын
test vesc 75450
@FlipskyTech 2 ай бұрын
Hi Sir. Thank you for your great support. Please kindly send an e-mail to flipskytech@outlook.com for more details check. Thanks.
KAMi JUINs
Рет қаралды 5 М.
KAMi JUINs
Рет қаралды 12 М.
Авто95
Рет қаралды 3,9 МЛН
Tokparty
Рет қаралды 1,2 МЛН