Finally an instructor that doesn't waste time, it's just straight to the point.

Awesome video, thanks for that. Some really simple tricks that will help me produce my own sounds along with getting that all important 'feel' ;) Thanks and props to you for this CLEAR VIDEO :)

Very helpful. Thank you, Loopy.

Thanks man, helped bridge the gap on some things on the GUI. For those who are confused or feel like this is really good info yet dont know how to use it, I suggest checking out the Reason 4 demo first. You have a more hands on learning curve with regards to audio signal as you can view the racks and re route the signal. I am still a novice, but learning the building blocks of reason made the return to FL so much easier. Thanks again for the video.

It's on the FX page. There's a D1, D2, and D3. Turn off their "enable" buttons.

beautiful tutorial. thank you!! make more pleeeeease!! sytrus is so confusing it makes you sick sometimes

Thanks! very informative indeed. :)

His speach is fine that's how it should be . Nice and clean , if you don't understand something you can pause and replay it .

Sytrus is really impressive

exellent , thanks

Amazing! thanks for this, it really helped me :)

Nice, I actually understood a lot of this.

Big help..! thanks buddie

well explained mate!!

Holy shit. Sytrus has just blown my mind. I don't even...

well that made about as much sense as a japanese VCR manual! il watch that in a few months when im not a newb!

yes thanks alot man i rly understand so much more about sytrus after this its a great synth only minus point i can come up to is that its so damn small they should realy make a bigger skin for it

@meppyhead12 All you need to do is look at the 9x9 matrix. Look at which knobs are on. If knob Op. 2 to 3 is on, then go to that operator and look under each envelope tab. If the envelope is crooked, or has a bunch of points in it to create a sequence, delete all the points except the 2 on each side. For example, Eurogate (sequence) has the knobs Op. 1 to Filter 1 and Op. 2 to Filter 1 on. Go under the 'Filter' tab. Under 'Vol' under 'Cut'. Delete all points except the 2 on each side. Voila!

Thanx

that's why youtube included the clever little buttons pause and rewind.....

Sytrus is still my favourite synth. The harmonic editor allows for the best of both worlds not to mention being a brilliant wave table generator i.e. there's not a sound this thing can't make.

How do I turn off the echo?

Ideal speed for a tutorial would be something between this and Warbeats' tutorials in my opinion. Good job anyways!

I learned how to zoom in and out.

@Aur0raX its an advertisement video probably, in order to make it shorter (shorter = cheaper to show etc and faster) they speed the voice up by ~10%

Nostalgia

its definitely got a lemon there for the hint ;)

My brain just exploded.

Just a tip to get over that nerd problem, you can pause the video and learn the terms yourself via Google. I hope you see you'll learn way faster, because of a higher understanding in principles. I do understand your problem. You'll need to take time to consume the material just like music theory, it doesn't make sense at first but when you start to understand the basics, it's pretty straight forward and self explanatory.

@Rich7714 you can buy it seperately from ImageLines webstore :)

A real studio, this is for music creation.

U r absolutely right and i appreciate ur effort.but i have no theory knowledge at all,so can u plz make a tutorial that does not use any theory...thanku! :)

Works Great on Intel C2D E8500. i even overclocked it to around 3,8ghz. but the cpu can clock up to 4,47ghz on aircooling and 5,7 on extreme cooling. sytrys doesnt eat my cpu :D

@TheKonrad1984 silver saw probably, but there are some other awesome ones too if you play with moogish and stuff

How come when I am in the operators and I use the left mouse key it creates many more yellow dots? I only want the move the dots I already have.

@meppyhead12 Hope this helped a little bit. Some sequences are harder to change than others, but just go through the needed tabs until you find what you need. To change to a sequence, do the opposite. Make a crazy envelope and experiment with it a bit! Just message me if you have more questions...

amazing tutorial. i use fl for a few months now. a month ago i would say i hate sytrus. But i'm enjoing it since an week. and now with this tutorial. jee..paul your're the best. Oh still having problem with the cpu. that dam synth is killing my computer. is there a tip for that, guys?

how to i lower the bass on a sound in sytrus?

If u ask a nerd to teach u something,he will always use the difficult terms and most of the time you will not learn a single thing.this video explains what i am saying!

Does this only come with FLStudio or can I buy it separately to use with Cubase?

this wasnt fast but if you dont know the terms i guess this would be confusing as shit lol. i used to think sytrus was so basic because i had no idea how it worked. but after learning how to use sytrus to its fullest i like it better than massive, albino, nexus and z3ta because i can make things purely from scratch and have my own sounds and the interface is actually easy. hands down sytrus is fuckin crazy

i remember when i first used cytrus computer volume at max . . check fl studio app volume max . . . check 6 sanyo mcs 56 and a rosford p2 all at almost max . . . . yae i dont even really have to tell you check and then i try to play a note and absolutly ruin my pants with feces

@ilhadosmacacos were would i find that that sytrus is hard to pacth

I have FL STUDIO 8 But my Sytrus say demo. How do I get it to not be a demo?

You know what's funny? I understood 90% of that. XD

well im just comparing this video to some of the others i was trying to watch with stuttering nerds that were confusing me. i have ADD too and accents hold my attention better somehow

Got our work cut out for us

How do you get sytrus to start in the default mode...?

WOW!!!!!!! SONG AT 0:00 IS AURAL PSYNAPSE BY DEADMAU5!!!!!! :D

I know. it is possibly for a "Y" to represent the "I" sound. But yeah, I call it still it sitrus really. its a potato potahto thing.

Buy it in the Image Line Shop :)

I WANT TO MAKE MY OWNE EURO GATE INSTEAD OF USEING THE PRESET HOW DO I DO THIS

make sure you have an asio sound driver. like asio4all. its free

i learned how to say Sytrus lol

There is one sound in Sytrus,,but don'tremember the name of it :(,,but is a great sound for trance :)

when he says wave form I hear Iphone

the first thing i can think of is that you´re low on CPU performance. you could try increace he latency in your audio settings and the renderqualitything on sytrus.

I just posted a vid explaining how to understand the math for FM synth. Check it out!

@Nexxion lol even my first language isn´t english and i can stand him very well

If he says SIETROOS one more time I swear....

@trexatron7 Press default in the presets

1: Get Vuze. 2: Search for Sytrus. 3: ??? 4: Profit!

why buy it when you can crack it?

When does he start to play on that thing? xD

sytrus might look like a newb plugin at first, but when you start experementing with it you find that its a really complex plugin Use Dax!!!

God i feel dumb when i watch these...

Why does he keep saying Psi-trus?

Sloooooow the fuck Doooown

blabla synth blablabla voice blablablabla preset blabla hope you enjoyed.

@wayn0uk haha!!

sytrus is with fl by default... the tutorial is off torent i think

accents are much easier to understand

that's so fast. I really don't understand anythink. My english is so bad. My brain was burning.

@Aur0raX LOL

GO AUSTRALIA

just download massive.

i have no idea what you're talkin' about

Everyone understands Chinese. X

Citrus... Sytrus..... nerd.

@Aur0raX dont u love smart people

Hey, ass, thats how it's pronounced. Citrus is Citrus. Sytrus is (Psy - *truh - ss) So it IS indeed "sietroos"

grüss gott können sie das auf deutsch erklären verstehe kein englisch war auf sonderschule help please sos

LMAO!

the person talking is a computer lol i cant understand shyt

i cant understand any of this

its pronounced Citrus notice the lemon???

i instantly gave up after watching this video LOL

This could've been amazing, if you only spoke it out properly. It is impossible to figure out what you are saying!!

well i would find this helpful if i understood half the fucking lingo.

man, wrong ... the accents distort the regular english therefore i see no reason to think that its much easier .... its not - the guy who speaks in the video is with UBER distortet with the accent :) cheers man :)

To fast Man.

dude u speak too fast wtf ?!

ya you speak too quick

Speak faster.