Restored my Fluke 83 to perfect working condition. I couldn't be happier with your product. Installed the repair kit a year ago and it is still going strong. Retired Electronics technician Larry S in New Jersey

This kit fixed my light LCD display. Now all segments are nice and dark the way they should be. Time to fix < 10 mins but watch video first. Happy customer highly recommended product.

I own a Fluke 79 that had a similar display problem. While it is not identical inside, it is close enough that this video helped me fix it using using a couple of the gray elastomers that Fluke had sent me a few years ago. Your information about the contact cleaning not being necessary and the demo of taking the display apart was just what I needed to help me understand that I wasn't really risking major damage. After years of ghosting displays, the thing now looks like new. Thanks.

Purchased the kit of EBay and I had my doubts looking at 2 rubber like strips. Watched the Video and now I get it. Took me all of 3 minutes. Fluke88 is like new again!

Just repaired both my 87 and my 75. At first the new pads in the 75 did not help, lots of segments missing.... I did clean both pc and led contacts (very carefully) with Deoxit D5. I did not take the cover off. I used a miniature brush made from a cut off and crushed end of a tooth pic (squeezed between pliars until "brushy") dipped it in the Deoxit and wiped lightly down in the slot on the pc board. The 75 now works quite well now as does the 87. Thank you very much.

Thanks much this 87 lay dead for more than 10 years and you help me bring it back to life, (UP).

Fixed the display on my Fluke 83 in just a couple minutes. Great product.

I picked a fluke 87 at a yard sale for 4.00 the display wouldn' t work; I changed the battery and ordered the reair kit here installed it and for 24.00 I have a working meter. this worked well Thanks

I found one at work someone had thrown out because the display was unreadable. All I did was clean the contacts and your video showed me which direction to put it back together so it was right side up. I now have a working meter. If it quits again I can order your part.

Found this video. Purchased the kit. Meter is like new! It is tricky putting the screen back on.

The elastomer and gold pads can be cleaned with pure ethanol or isopropanol to restore function. No new zebra strips are required.

thank you so much

Great tutorial! BTW , you sound just like Bob Dylan - uncanny!

hI, I am soryy to say you have not clean card and it busbar .

Great. Thanks a lot from a happy customer :-)

Thank You !!!!

Kit no longer available. Contacted Fluke to repair my meter for this issue. No longer servicing the Fluke 87 True RMS, but I could buy a new one from them for nearly $400. I tried to have this repaired back when it started happening back in 1993~1994 timeframe, but they wanted $250 as a "repair fee". I paid $225 for the meter (maybe less). I wasn't happy for sure. :(

Great video. Would your kit be good for my 8020A?

Ordered your kit and replaced the elastomeric strips with the new gray ones and the display didn't get any better. I have an old FLUKE 87 meter from when I worked at Xerox. It is probably 40 years old . Is it beyond fixing? By the way the contacts on the PCB are not copper colored; they are dark. I have cleaned them with alcohol, but no difference in the display.

If they will last for 20 years why only 90 day warranty? Just messing with ya...

I have a fluke 77iv multimeter,when it's turned on the display is on the same way for all functions,please help.Thanks

Hello! I got a Fluke 87 Multi Meter I want to purchase from you the LCD and the Rubber connector. I am from Singapore and please let me know what is the price including shipping to Singapore. My Fluke meter the screen is faded badly. Please advise asap. Tan Peter

Como se llaman esas esponjas negras?

A+. Lot's of Brains.

My Fluke 88 stays at start up screen , with all led's in test mode everything visible

i have question .i put the leads to connect 9v battery positive to positive negative to negative is no reading.i reverse leads have .554reading on the diode setting test.is normal or short circuit ?

This device costs a fortune here in my country. A fortune!

where can i get the display , my fluke 87 V display is gone bad, black botched up display.

Link to Free Download Step By Step Instructions: lcdrepairkit.com/fluke-download-instructions/

Ada lcd fluck 73 iii

Do you sell the LED backlight replacement? Did you ever sell it? I have the two grey elastomeric parts from you and an LED backlight, but no instructions on how to install the LED backlight replacement. My Fluke is an original 87. Thank you.

Sir, where I can buy new elastomer connectors for fluke 87-v meter? Can you send a link for this?

This guy sounds like Bob Dylan :)

Is it some glue used to elastomer connection?? Or not use ?? Where we buy elastomer, and lcd fot Hioki 3230 ??

So you have any sales outlets in mumbai

How different is the 27/FM

Nhow

Where can I buy a screen?

Do you sell the LCD for Fluke 87 Multimeter or do you know of any stores you can sell?

Where can I buy the gray elastomers the link above doesn't work.

Looks like this guy is out of business...