Best video ever! I've watched others and this is the one that always helps me restart my filter after cleaning! Thank you!
@betterdayz166013 күн бұрын
Did no know half of the stuff u have said very clear instructions gunna try it no thank you
@gazyg19733 жыл бұрын
Love the fluval filters simplicity 👌
@Dragoneere2 жыл бұрын
Worked really well since we moved and I forgot how to restart it. Only annoyance with the video was half the screen was black but other than that, easy explanation. Thank you!
@krazykid2002k3 жыл бұрын
Great video keep up the great work appreciate the review just purchased one so always love 2 see and learn thank you
@ScoTTyScoTTyScoTT3 жыл бұрын
Thanks for these videos! I refer to them every time I need to maintain my filter
@EverydayAquarist3 жыл бұрын
You're welcome
@jamestreanor71762 ай бұрын
Great help on this video 👍
@nallasivamrameshanandan188211 ай бұрын
I’m very new to this hobby, your video is very helpful for me thank you so much.
@nikolas.alefragkhs2 жыл бұрын
Thank you very much bro. You saved me a lot of time.. thank you again❣❣❣🤗🤗
@AQUAGUYUK3 жыл бұрын
Never had an issue with these but some handy tips
@Xenda2 жыл бұрын
Thank you so much, you saved me a ton of time!
@willparsons32 Жыл бұрын
Really informative video.. I over estimated my 307 a few days ago when I first set it up... From owning other types of less quality types of filters, I've since then - come to understand that the only way to get the filter to work properly was to pre-fill the canister with water before plugging it in to the power source. The reason being - according to the instruction manual - the motor would burn out. With Fluval, this changes everything! NTL, ANYONE who has just purchased the "Rolls Royce" of canister filters, YOU NEED to pay FULL SIZE ATTENTION to this video!
@steviekehoe3 жыл бұрын
Great video, I've a 206 and never had a problem priming it. Maybe it's because I cover everything in silicone grease (Including the primer shaft and plunger). What I do have a problem with is the noise!
@EverydayAquarist3 жыл бұрын
Mines really quiet
@StuEvans3 жыл бұрын
My 406's are quiet. The 405's are not much different. Air pumps now that's a different thing. With 7 tanks it's like living in a bee hive!
@smokescreenFromThe6ix Жыл бұрын
I have a 307 and you can barely hear it.
@steviekehoe Жыл бұрын
I think it depends on the location. Mine was (I've now changed to an internal filter) in my bedroom and sounded loud at night. I managed to reduce the noise by sitting it on a mouse pad and cut off bits of the pad to put anywhere the pipes touched the cabnet. It's a great filter but I would only recomand internal filters for a bedroom tank.
@thefoxalexg87522 жыл бұрын
Super that's helpful for water changes.
@bonesawarm69872 жыл бұрын
Handy that you can reduce the flow
@teresalove28233 жыл бұрын
Needed to watch this! Very informative.
@midas2252Ай бұрын
Thank you kindly.
@leemus19662 жыл бұрын
You have an absolutely beautiful tank room setup! ❤️
@d4l72lee93 жыл бұрын
Thanks for explaining in detail how to used this item I have a brand new one,sitting and waiting to be used for pleco tank
@OriginalKaramelKing Жыл бұрын
Cheers mate! I'm all set up now! 👍🏾 Nice one!
@connie67052 жыл бұрын
Thank you for doing this video! Very helpful! I have this filter but I’m new to it. I was wondering if once it’s running, if it’s ok for the output to be below water level, or if it should only be level or slightly above? I have a 29 gallon and also run an air stone for surface agitation to make sure there’s enough oxygen.
@amac87503 жыл бұрын
I have the 06 and he is 100% right its a pain to prime. Definitely looking at upgrading to the 07 soon.
@woltergrant3 жыл бұрын
SuperFatGeez fluval has a decent comparison video
@steviekehoe3 жыл бұрын
If it's hard to prime try putting a smear of food grade silicone grease on the primer shaft and on the plunger/plunger cylinder. That can help make a better seel.
@EverydayAquarist3 жыл бұрын
Hello if you're having issues starting and priming your Fluval 07 filter here's a guide on how to do it!
@CDAFishboy7 ай бұрын
Informative video. The instructions said to fill the filter before starting, so I filled in AND THEN out the top on. Oops, emptied it and started over. I tried both methods you lay out and there is no bubbling. The filter does not fill one bit, either priming it or not, summering out outlet or not. I have the gray lever down. Everything looks good from your video or the instructions. But nothing🤫
@ruthiemenendez87727 ай бұрын
Same! Did you ever get it to work?
@franmorr19663 жыл бұрын
I appreciate the directness and clarity in the directions.
@franmorr19663 жыл бұрын
Question-what is your opinion on the placement of 2 Fluval 407’s? 120 gallon, 4 feet x 2 feet. No live plants and larger fish except for cherry barbs. What is the way to get the best circulation? Thanks!
@tukpoon43542 жыл бұрын
Thank you, I found the video :) save me sucking the tube to drag the fish water out
@karliover3 жыл бұрын
Thanks
@MrFrosty8882 жыл бұрын
Compared to other brands at this size this is the worst I have had or used. Returning mine tomorrow
@lettyyaknow337811 ай бұрын
Thank you !!!
@ThisLadWayne Жыл бұрын
3 weeks and my flow is so much slower now. As if its warn out. No blockages etc
@andycarter45812 жыл бұрын
It works, thanks!
@michaeldoherty76873 жыл бұрын
I have a 307 never had a problem with it
@biseryordanov95223 жыл бұрын
Hello I have a 307 and my clamps on the head motor feels like loose when I locked,is that normal ?do you have the same thing ?thanks
@abbiesianlouise2 жыл бұрын
My 307 is always a bastard to restart after removal and refit
@Dadof3kidz2 жыл бұрын
I just defied the instructions filled the canister right out of the box, filled the tubes with water and plugged it in. It works. Why so many words in the directions?
@EverydayAquarist2 жыл бұрын
Rebel
@joeoak7090 Жыл бұрын
Shoulda bought an extra hose I did,my filter could go in the other room and still have length
@kingtv33214 ай бұрын
The video is watched before said to fill the filter with water should i pour out the water
@marcusdavies10378 ай бұрын
Mine has been purging now and again on new set up
@Crawling3nmyskinАй бұрын
Does it matter if you leave the lever up or down?
@enguangwang37313 жыл бұрын
after wash the filter. I have to pump the filter so hard for it to work again. am I doing something wrong? I plug it before I pump it
@dirtyprinz2242 жыл бұрын
Just washed mine not doing anything but making noise
@timeless1112 Жыл бұрын
Yeah put the gray lever down just had the same problem Lol
@ThePitbulone Жыл бұрын
Can turn down pump pressure ,as sucking fish into vent ,lost 3
@melissasparman7496 Жыл бұрын
Thank ypu for sharing but I have the 06. Would it be any different because im trying to have my clean and now its not priming like before.
@Kissing_fish_aquatics5 ай бұрын
I just got a 207 and I’m having an issue of it running then it slows down and blows out micro bubbles like it’s purging. How do I fix this for a constant flow ?
@StuEvans3 жыл бұрын
05's pain in the whatsit. 06's no problems for me. I do it slightly different by just pulling up the plunger while it fills. Start pump and push down lever. Pushes out last bubble. My cannister is much lower though. OK filters but getting dated compared with newer designs
@miriams824111 ай бұрын
U fortunately mine overflowed with water on the floor with the simple priming and then wouldn't work after plugging in and input and output flow correct. My 7nderstanding is top 9only goes on one day. Wasted my entire Saturday trying to get it to work but ended up mopping floor instead. Returned.
@patreektherodian Жыл бұрын
Mwhat is wrong if I cant pull the grey lever even when I have the whole head remouved
@kai_s.5177 Жыл бұрын
Where did you get your section cups?
@kristophermichalak500 Жыл бұрын
Hi I have a 307 model and after year old start licking from the right side of motor head I don't know what do do
@yamui21662 ай бұрын
Oh I thought it's was a super powerful flither It's a very expensive Flither
@adrianporter841510 ай бұрын
Hi when i clean my tank and 307 filter there's a noise inside the filter and it leaks air must be trapped air ,how do I stop this please
@bribri7215 Жыл бұрын
Its brand new and I waited around 10 minutes for it to siphon and it's not starting right away
@C3E_DRILLY-ps58 ай бұрын
Should the lil pump thing come out cuz mine comes out if i pull it to high and it doesnt fill? Plz someone lmk
@lorreanneramos122 Жыл бұрын
I just bought another one because my old one was over heated, I set up everything but the new one is also over heated is there anything I’m doing wrong as to why it over heats and making noises ?
@martchen5175 Жыл бұрын
Please help! I cleaned my Fluval 207 for the first time, put it back on and it does nothing. It is plugged in, I can hear some noise, but it is not filtering. I am crying. 😢
@sm82022 ай бұрын
Does anyone have a 407? Mine is 3 years old but it’s now making a sound like it’s struggling to pass water the water intermittently ( like when you first connect it and it’s refilling noise)
@sm82022 ай бұрын
Hi, had same problem, changed the ampeller and works fine
@ronnytejada7008 Жыл бұрын
Great
@David-jc2uq2 жыл бұрын
Could I top it off since the aquarium water went into the canister?
@EverydayAquarist2 жыл бұрын
Yes
@miriams824111 ай бұрын
I watched your install video setting up 207 unfortunately i did not have the success per your video
@mithul6170 Жыл бұрын
thanks for the video. what u say about the noice while running the filter ?
@alitkmaxx Жыл бұрын
What’s the big black fish?
@michaelhawken78613 жыл бұрын
We have a 407 not more than a year old on a turtle tank , problem with the primer seized , have spoken to the manufacturer who suggest a new primer kit , which we have but on removing the old primer a piece of what looks like a black rubber seal has come out and the new handle is sloppy in the insert , is this filter pump suitable for use with a turtle tank and how can I get the o ring or seal that must be broken .... has not gone well since we bought it
@user-uv1jt8rx6p2 жыл бұрын
how do you put molly in to the salt water?
@teutonic8603 жыл бұрын
Is that aquarium glued to the stand? That’s amazing
@craigjackson68833 жыл бұрын
Looks like it's sitting on bubble wrap
@thebarthmtb3 жыл бұрын
I tried make the same but my 207 still is very noisy I use it few hours? Maybe i got the broken one?
@nataliewillis90678 ай бұрын
Can’t close fluval 307
@Cogzed Жыл бұрын
My 407 won’t prime. 😢
@isaiahmonster69278 ай бұрын
Did you ever fix it????
@MRFLIP4 ай бұрын
Check the ball inside the intake tube
@Cogzed4 ай бұрын
@@isaiahmonster6927 nope. Took it back.
@Brandon-un7rl3 жыл бұрын
Sorry can you help me my fluval pump Motor the plastic thing is broken can you send a link to one or can u tell me name of what it called thx
@haleyraenj3 жыл бұрын
what if it dosent start gurgling on its own after a few pumps?
@EverydayAquarist3 жыл бұрын
Keep pumping until it does, otherwise its incorrectly setup or faulty
@IndonesianAbroad-Cendhani3 жыл бұрын
Same as mine.I waited for a while but it doesn't start pumping
@anitamiller15713 жыл бұрын
I have an old Fluval 304 that I want to test to find out if it works. Do these work the same way?
@sherryjarecki17013 жыл бұрын
I desperately need help,I’ve cleaned everything , it’s been rattling & not priming,I feel no resistance when I plunge it, why?
@funkfarmer71252 жыл бұрын
Sounds like you might have your In and Out hoses mixed up. If you put the hose from the intake on the OUT nozzle on the can it will do that. Don't run it like that though it will burn out the impeller. It's and easy thing to mix up I did it w my first can.
@dannyhardy32953 жыл бұрын
Hi, I want to buy 1 of the 07 external filters however my fish tank is in my bedroom so I don't want to be listening to a humming noise, how loud are these filters? can you hear a noticeable humming?
@EverydayAquarist3 жыл бұрын
A slight hum but I could sleep with it
@dannyhardy32953 жыл бұрын
@@EverydayAquarist Great, thanks for the reply
@maxcheers93943 жыл бұрын
Will this be enough for 3feet?
@njt9373 жыл бұрын
I'm getting alot of air bubbles and the off spitting sound any recommendations
@davy11013 жыл бұрын
Try carefully tilting the filter a bit to get some air trapped in it to come out or just leave it running it should clear up
@meganbrown69322 жыл бұрын
I did everything as said in video and it weren’t fine for 10 minutes and then stopped.. any ideas what I’m doing wrong?
@patricksrenaski36192 жыл бұрын
I have multiple Fluval x07 filters. What I have found is that after the filter starts correctly, there could be air in the media that build up at the pump impeller. The flow will stop. Pumping the primer will get it going again. Also, tipping the canister front/back/side to side will allow any air remaining to vent. I always make sure there is no air left after startup or cleaning before calling the job done. Normally, I need to repeat the restart at least 3 times. I love the x07 canisters but, air lock of the pump can stop the flow. Also, some people put an air stone right near the intake. That's a bad idea. The air WILL get into the canister and it could stop the flow. Regards.......
@sawomirsmiaek57862 жыл бұрын
i have a question - what is that biutiful fish all black with yellow lips :)
@lightspeed723 жыл бұрын
It looks like you have Molly's in a saltwater tank? Or am I mistaken?
@EverydayAquarist3 жыл бұрын
Yes they do well in saltwater (Sailfin mollies)
@aarona53512 жыл бұрын
Tried this and still not working ...spent 3 hrs doing the same thing
@jessicaellison7332 Жыл бұрын
I have an 06 ...I can't get it going for nothing,got it used and followed your videos for cleaning and priming, your a god send....but any tips to get this twat running?😢
@edwindsouza6795 Жыл бұрын
Hi Sir, I recently bought a 207 filter, the output flow is too low when compared to yours.. could you pls suggest ?
@stevedaddy5707 Жыл бұрын
Clean it out , check impeller , don’t overpack with media or sponges
@TheAusherGuy3 жыл бұрын
The gray lever, can it be slightly up to reduce the flow?
@marcusfowler91532 жыл бұрын
Yes, according to the fluval website they say you can move the Grey shut off lever about 45 degrees to reduce flow a max of 50%
@baconcatsandawesome9243 жыл бұрын
I’ve heard this filter is hum silent. Is yours?
@EverydayAquarist3 жыл бұрын
Mines pretty quiet
@meganm18222 жыл бұрын
My bubble thing is not working when I pull it up out of the water to check it it has water coming out the bottom of it. But there is no bubble making going on I tried to check everything I don’t know what to do could you please help me
@klaudiatomaszewska96103 жыл бұрын
Hi I just bought a Fluval 407 ,and I wonder why is splashing so badly on side and all over my room, any ideas ? Please :(
@teresalove28233 жыл бұрын
Having the same problem. Did you find a solution?
@klaudiatomaszewska96103 жыл бұрын
@@teresalove2823 hey Teresa! Yes I did :) you have a grey handle between IN and OUT ,just pull it down or up , or in the middle to increase the flow of water :) works perfect for me now :)
@patricksrenaski36192 жыл бұрын
@Jellybean 2 things. Make sure the rubber o-ring gasket is in place on the power head or it's flood time. And make sure the hose assembly is pushed all the way into the power head and the red locking handle is all the way down.
@maxcheers93943 жыл бұрын
How often we need to clean this filter?
@ajrbrandedpeace27483 жыл бұрын
Depending on how many fish and how much food you put in you should find a balance. At end of week check filter if there too much feed a bit less
@bussy76273 жыл бұрын
Hey man do you know if the 107, and 207 use the same pump?
@steviekehoe3 жыл бұрын
The head off the 107 and 207 can be switched but the 107 head has a lower flow and the 107 I think has a smaller impeller cover.
@lliw5695 Жыл бұрын
Is the flu all 207 good for a 20 gallon tank or is it too much?
@PasqualinoFondanzio3 ай бұрын
The nozzle is the stupid part ever created on that filter