No video
FlySKY i6 Differential Thrust Mix
Рет қаралды 31,540
Күн бұрынHow to mix differential thrust using the Flysky i6 radio. FS-i6B receiver. Cargo Trans C-160 model.
Flysky FS-i6X 10 channel - bit.ly/39AkPdR
FlySky FS-i6 6 channel - bit.ly/2vFY49Y
C-160 KIT - bit.ly/2DxeGll
C-160 PNP - bit.ly/2BseBOo
BANGGOOD Newest planes - bit.ly/2Gciz0j
...........................
SUBSCRIBE & CLICK 🛎
bit.ly/ANsubscribe
🎥 Video Recording Gear 🎤
Flying
Onboard camera Mobius C2 - bit.ly/2RLNLLg
Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
External Microphone - bit.ly/2S4VDqx
Studio
Wide view workbench camera - SJCAM M20 Action camera 1080P 30fps - bit.ly/2Wh5l8w
Close up workbench camera - Panasonic Lumix LX10 1080 30fps
Audio recording - Rode smartLav+ mic connected to iPhone - www.jbhifi.com...
Video Editing in Final Cut Pro X on 27" iMac
All the Action cameras I have reviewed - newtonairlines....
🔎 More information 🔍
Newton Airlines Uncut - / @newtonairlinesuncut
Newton Airlines blog - newtonairlines....
Andrew Newton KZfaq - / @andrewnewton
My portal - anewton.net
What HD cameras do I use - newtonairlines....
What FPV cameras do I use - newtonairlines....
What FPV gear do I use - newtonairlines...
Depron Armin Wing build - • Depron wing build
👌🏽Affiliate links 👌🏽
BANGGOOD RC - bit.ly/2R7LMgg
BANGGOOD Website - bit.ly/2OYahv4
⚠️ Disclaimer ⚠️
Some products reviewed on this channel are provided free of charge by the supplier. Some links in this description are affiliate links. If you use these links to make a purchase I may receive a commission, which helps to fund this channel, at no extra cost to you.
👀 Use your common sense, watch other reviews and shop around before making any purchase.
#AndrewNewton #flyskyi6 #differentialthrust #scratchbuild #RC #plane #airplane #slopesoarer #glider #underwater #review #depron #foamboard #hotwire #airfoil
@benjaminhoward9801 4 жыл бұрын
Sir, you are a gentleman and a scholar. I somehow manage to program this before but it was quirky to say the least. This method is solid and functioning as intended! Thank you so much. Hats off to you Sir!
@AndrewNewton 4 жыл бұрын
Great to hear, thanks Joe
@colddash5598 5 жыл бұрын
I’m days away from finishing a dual motor Walmart styrofoam glider conversion... this video is perfectly timed , i think I’m gonna have to try this out. Thanks for taking care of us budget Flyskyers.
@AndrewNewton 5 жыл бұрын
Glad to help
@KenKneknaneek 5 жыл бұрын
Great video thanks. I don't have anything with 2 motors yet, one motor is bad enough lol. This also helps me understand my flysky transmitter like yours and how to mix etc. It is so much better to watch you explain things like this than me trying to read and understand what they are talking about in the manual. Much appreciated and Happy Flying
@AndrewNewton 5 жыл бұрын
There's a manual? I just sit down and fiddle with it until it works.
@aliberkozderya3112 5 жыл бұрын
Thank's for not forgetting us poor fellows:)
@AndrewNewton 5 жыл бұрын
Haha, never forget
@joshwheeler4157 6 ай бұрын
Thank you so much for the explanation. It works perfectly for me on my flysky i6!
@geofkane2365 9 ай бұрын
A very useful demo.
@Siphonife 4 жыл бұрын
I'm getting my first RC build kit here in a week or two with an I6X Transmitter and my plane is twin engine so this helps a lot.
@AndrewNewton 4 жыл бұрын
Jumping in the deep end. You dont need differential thrust but it's fun to play with
@dustinhanlin 5 жыл бұрын
Brilliant. This question has been asked a bunch. I'm glad you tackled it.
@AndrewNewton 5 жыл бұрын
No problem Dustin.
@walterdennisclark 2 жыл бұрын
Thank You Andrew
@theoztreecrasher2647 5 жыл бұрын
Eminently timely! Chuck gliders on the way, collecting rc bits and a mate's got an i6 just sitting there. Thanks mate from a tech illiterate.
@AndrewNewton 5 жыл бұрын
My pleasure
@marcajo111 4 жыл бұрын
Hi.thanks for this video. I have Taranis too , now Differential Thrust on my i6.
@kenmccallum233 2 жыл бұрын
Hey Andrew Thanks for your reply.I have set up your recommended mixes on a FS i6X in Mode 2, and find that the motors start running immediately the Tx is switched ON, at zero throttle on Channel 3. Looking at both motors PWM inputs to the two ESC boards on an oscilloscope, I can see that they are inphase, and the same amplitude, but the pulse width is already at 60% duty cycle at zero throttle, and rises to 80% duty cycle at full throttle on the stick on Channel 3. There is nothing connected to Channel 4, but it is included in Mixes 2 and 3. Operating the throttle stick in the Channel 4 (Yaw or E-W) directions, gives about another 10% duty cycle to the appropriate motor, and it speeds up a little. I have been fiddling with the End Points of Channels 3 and 5, trying to get the pulse width to go from 0% to 100%, without any luck. If I connect an external PWM generator to the ESC inputs, I get a full range of RPM, increasing with the duty cycle of the generated PWM signal, from 0% to 100%. So the motors and ESCs are OK. It's likely to be settings on the Tx, I believe. Any suggestions please? Regards Ken McCallum
@AndrewNewton 2 жыл бұрын
Very odd Ken. I would delete all mixes and start again.
@rexcode9366 5 ай бұрын
Thank you sir😘🌈
@jordancoleman2402 Жыл бұрын
You forgot to mention to pull the positive wire from one of your esc plugs going to the receiver, you will be doubling the power to receiver and sending mixed signals to it and stand the chance of releasing the magic smoke.
@anthonhansen5387 4 жыл бұрын
Great video. I'm trying to opgrade my Delta ray tp brushless and this helpd a lot. THANKS!!!!
@AndrewNewton 4 жыл бұрын
No problem 👍
@antonblebann6823 5 жыл бұрын
@ 2:10 & 5:08 You can see the Wing moves around the Yaw Axis😳, Video about the Mixing is very Usefull, THX.
@AndrewNewton 5 жыл бұрын
Differential lift?
@antonblebann6823 5 жыл бұрын
@@AndrewNewton Rather differential Thrust, make the Wing move back and forth relativ to the Fuselage.
@easy_3d 9 күн бұрын
Thank you so much
@AndrewNewton 8 күн бұрын
You're most welcome
@kingsleykronkk3925 Ай бұрын
SOLUTION to KILL Rudder / throttle mix control. Example in Assign switches Set Fly mode SWC (same as my throttle hold SWC switch) Then in Dual rates Ch4 rudder and switch SWC to sport (or Normal) with one Rate set at 0. Now the ch4 rudder will not work in one of the rates and not mix with the motors and motors disabled with either rudder or throttle. You can use different switches for whatever reason.
@jrgenramdahl123 4 жыл бұрын
Thanks. worked fine, since you explained every step, something other videos didnt. Unfortnally, I hit the throttle stick on full by accident after doing this and my plane took off inside my livingroom (my plane has a wingspan of 1.9 meters). ONe engine needs some fixing now :)
@AndrewNewton 4 жыл бұрын
Oh no! That would have got your heart pumping
@jrgenramdahl123 4 жыл бұрын
@@AndrewNewton Update... Hot glue fixed it all, and lesson was learned so I took of the props this time! :)
@claudemiroliveira9620 5 жыл бұрын
Muito bom, profissional, direto, seus vídeos me ajudam muito. Muito obrigado. Deus o abençoe... (Claudemir, Santos-SP Brasil)
@AndrewNewton 5 жыл бұрын
Muito obrigado. Saudações ao Brasil
@blueplane8656 Жыл бұрын
@@AndrewNewton for my controller on the display ch5 and ch6 are different than yours they both is on the right side
@AndrewNewton Жыл бұрын
@@blueplane8656 You might have switches assigned to 5 and 6?
@fredsnava 8 ай бұрын
Hi Andrew nice video. Please I can’t find any information about the best distance between twin motors using as differential for rudder. Is it better as close as possible to que fuselage center or can I space them for more close turns. Can you please help me? Thank you!!!
@AndrewNewton 8 ай бұрын
Thanks. Diff thrust is VERY effective so the motors don't need to be far apart for it to work. I would go by what looks good with maybe 50mm clearance for the props
@julianhumphrey4843 5 жыл бұрын
Nice one, never thought this possible on the humble ai6, still my favourite radio......now do i get that puddlestar with twin motors lol
@AndrewNewton 5 жыл бұрын
No excuse now
@didactylos4diddy474 5 жыл бұрын
Very useful indeed Andrew :)
@bobflyman 11 ай бұрын
Just a thought Andrew,, instead of using ch4, rudder can you use ch1 so the 3 mix supplements the movement of the ailerons? I have a tricky build that may need this. I think mostly caused by not using a matched pair of ESC's though. I have set an offset as descibed on your video but still yet to maiden and I'm wondering how linear the offset will be as I open the throttle!
@AndrewNewton 11 ай бұрын
Wouldn't that make it yaw whenever you did roll corrections? Mismatched ECSs may need some rudder trim tweaking maybe.
@bobflyman 10 ай бұрын
Only just seen the reply, thanks. Maiden was a disaster. Massive thrust difference. kzfaq.info/get/bejne/fJaektuUvafXn2w.htmlsi=jfRsgR80PDXO0 I now have a matching pair of esc's though that didn't solve the difference in thrust issue. Sorted in the end. It was caused by a poor connection on one phase, (ie, one wire of the three) on one motor. Quick solder job and they both ran the same (with matched ESC's as well.) Video will be out soon on the fix. @@AndrewNewton
@semriscosemdiversao7639 5 жыл бұрын
Muito bom, Newton. Acompanho seus vídeos. Parabéns!
@AndrewNewton 5 жыл бұрын
Thanks so much.
@KalibasauRC_64 Жыл бұрын
I just found out that the rader function to move this right and left motor, what does not use an ailleron my friend??
@AndrewNewton Жыл бұрын
No aileron is OK if you have some wing dihedral
@jakegriffiths2k 5 жыл бұрын
i feel like you made this video for me andrew ahahah thanks very much!
@AndrewNewton 5 жыл бұрын
I might have Jake. Dd you ask the question recently?
@jakegriffiths2k 5 жыл бұрын
Yes I did! Hahaha thanks so much
@ParaglidingManiac 4 жыл бұрын
What if my throttle's in the middle position for neutral, but I want it traditionally lowered all the way down for neutral? I have reverse there now.
@patterdalebt 3 жыл бұрын
Great video,have applied this to a tug boat catamaran and works perfect. I have just started with DLG and useing Jumper T-Lite pro. Question? How do I create (1) Launch mode on SW-D and Speed/Cruise/Termal mode useing SW-A with cruise mode being the middle position. Hope this clear and thanks for your input. Cheers. P.S. I need something for "LOCK DOWN"
@AndrewNewton 3 жыл бұрын
I have covered them in a few videos. Search for DLG and full house mix
@muhammetharputlu8841 Жыл бұрын
Please can you tell us what r the KV, RC and The size of propeller in the used plane in the video?
@AndrewNewton Жыл бұрын
All in the build video.
@zuryaz9597 5 жыл бұрын
Actually I too did the same settings but still my transmitter shows in display setting at channel 5 and 6 as opposite to yours also when I switch on the motor and giving the rudder left side motor giving different beep sound and not even rotating for normal throttle action. Please help me. I am still working on that.
@kenmccallum233 2 жыл бұрын
Hey Andrew Just watched your video on differential thrust. I will try it out on a land vehicle with two non steerable front wheel motors, to achieve steering. One question - did you set the Rx output to PWM and S Bus or i Bus? Cheers Ken
@AndrewNewton 2 жыл бұрын
Left it on PWM. Only need the others for flight control board connection
@mezyaz1632 4 жыл бұрын
Your video is fantastic .I am building a hovercraft with 2 motors for propulsion .I want to use differential thrust for turning .If i use reversible escs ,will i be able to use this transmitter to reverse the direction of both motors ? Your reply is much appreciated
@AndrewNewton 4 жыл бұрын
Not enough mixes with this radio I suspect.
@panyasowat4844 2 жыл бұрын
I want to know If you want to insert a gyro, can you use the Mix control program? We didn't plug the signal cable into the channel. Gyro's rudder, but using a method Mix that you teach Will the gyro work normally? will control channel 4 Rudder too?
@AndrewNewton 2 жыл бұрын
Usually you cant have any radio mixing on channels plugged into the gyro.
@peterfranzen3538 5 жыл бұрын
Thanks Andrew these i6 videos save me more than a few head headaches. lol Love the paint job , but has it melted the foam little?
@AndrewNewton 5 жыл бұрын
Just pitted the depron additions a little bit.
@peterfranzen3538 5 жыл бұрын
@@AndrewNewton I've found a method on KZfaq of coarse. very light coats from a distance that allows the solvent to mostly evaporate but not to the point of a powdery finish. This seems to work on the most delicate foams if you have the time .
@ishansharma6262 3 жыл бұрын
Hey!! I wanted to ask how to trim differential thrust
@AndrewNewton 3 жыл бұрын
Use the rudder trim
@blueplane8656 Жыл бұрын
What did you put on ch1,2,4,6, and b/vcc?
@AndrewNewton Жыл бұрын
1 aileron, 2 elevator, 3 motor 1, 4 rudder, 5 motor 2, 6 probably a switch, B/VCC can be battery if you're not using an ESC
@blueplane8656 Жыл бұрын
@@AndrewNewton ok thanks
@atheera349 3 жыл бұрын
Can we do the differential using the aileron instead of Rudder?
@AndrewNewton 3 жыл бұрын
You will turn with every roll correction
@messybench974 4 жыл бұрын
Really good explanation! But i have a question, can we do a 3ch plane with only elevator and differential thrust? Thank you so much
@AndrewNewton 4 жыл бұрын
I would think yes, something to test in the future
@messybench974 4 жыл бұрын
Would like to se it! Thanks for answer! Cheers
@iforce2d 5 жыл бұрын
Do you know if it's possible to set up a mix so that flipping a switch completely reverses one of the other channels? Eg. reverse pitch for flying inverted for long periods, is what I want to do.
@AndrewNewton 5 жыл бұрын
Don't think so. Can't assign switches to a mix. You need a Taranis!
@mihailescue 4 жыл бұрын
Great work and presentation! I use your settings for my two motors bait boat. Is any possibility when I stering my boat one motor go forward and the other backwards?
@AndrewNewton 4 жыл бұрын
Would be possible with reversible ESC but I have not tried it
@mihailescue 4 жыл бұрын
@@AndrewNewton I have them, but I can't figure how to set up the Flysky 🤔
@razvanlazar4562 6 ай бұрын
@@mihailescue hi, have you configured the remote control to work the reverse function? and if so, how?
@triananta9407 5 жыл бұрын
How to put the differential thrust to replace rudder if I am using flight stabilizer or flight controller on twin motor. Without differential thrust it just connect like normal plane (paralel esc).
@AndrewNewton 5 жыл бұрын
Not possible with a stabiliser I think
@craftingmc7170 4 жыл бұрын
Thanks for this video Andre but I have a question : while you fly is the different thrust Also active? Becouse while flight I think you would crash if it is active.
@AndrewNewton 4 жыл бұрын
I prefer to turn it off for flying but not possible with this radio.
@messybench974 4 жыл бұрын
Thank you so much for the explanaition, I have a question, I've done it but when I increase throttle very slow one of the motors starts and the them the other, is that a problem whem i will fly it? How can i solve it?
@AndrewNewton 4 жыл бұрын
A bit of rudder trim maybe? Probably never get them to start exactly the same.
@messybench974 4 жыл бұрын
@@AndrewNewton im trying but nothing yet, im worry it wont lead to a crash, im kind of newbie as pilot, thank you so much for answer! Cheers
@sakibian01 2 жыл бұрын
Did you change the switches first??
@AndrewNewton 2 жыл бұрын
Yes I set up the throttle cut first
@bowenbrown 2 жыл бұрын
Hi Andrew. I am currently setting this up on a twin engined plane I am building. When I am at full left or right rudder, it only puts the respective motors to about 20% thrust on low rates and at most 50% in high rates. Do you know why this is happening, and how I can fix it? Thanks, Bo
@AndrewNewton 2 жыл бұрын
Look at Sport and Normal rates for rudder. Probably cant get more than 50%
@bowenbrown 2 жыл бұрын
@@AndrewNewton Right thanks very much!
@joshbennett6293 4 жыл бұрын
Hi I'm using this transmitter and same mix in this video I want to be able to cut out the throttle on a switch for when I'm steering how would I do this ? Thanks
@AndrewNewton 4 жыл бұрын
I have done a throttle cut video, but it might not be possible with differential also. Look at my FlySKY i6 playlist
@finnleithomczyk5292 5 жыл бұрын
I don't have a rudder on my model but I have 2 motors, do I do everything the same?
@AndrewNewton 5 жыл бұрын
Yes, that will work
@evannadzam6528 5 жыл бұрын
How to you use a aux channel (5,6) to have aielerons
@AndrewNewton 5 жыл бұрын
I show how in the flaperons video kzfaq.info/get/bejne/pMmka9B4nMjdm5s.html
@yasinziaie5014 4 жыл бұрын
is differential throttle possible with fs-i4 transmitter? I have a fs-A6 reciever.
@AndrewNewton 4 жыл бұрын
No, you need a programmable radio
@yasinziaie5014 4 жыл бұрын
Andrew Newton , not even TANK moving?
@lalithkishore3774 5 жыл бұрын
Can u do this with any open tx radio .and I did this in flysky once but on giving throttle one side is pulling more so it's not going straight . Both motors are the same but still .I didn't get it straighten
@AndrewNewton 5 жыл бұрын
Much easier with OpenTX. Might have needed to trim the rudder for straight thrust?
@lalithkishore3774 5 жыл бұрын
@@AndrewNewton it's a hovercraft so I don't have rudder .
@serban1967 5 жыл бұрын
Strangest think, Andrew, reversing ch 4 won't reverse left/right. I've had to reverse ch 3 and 6 (my choice to be ch 6). Any idea why? Thanks
@AndrewNewton 5 жыл бұрын
Don't know, I'll have to rewatch my video, this is not my usual radio.
@serban1967 5 жыл бұрын
@@AndrewNewton I found the problem, I had to change mix #2 to -50% and #3 to +50%
@factbazar4286 3 жыл бұрын
I followe exact same but my one motor is spinning faster
@AndrewNewton 3 жыл бұрын
Tricky problem. Try some rudder trim
@pi_ 4 жыл бұрын
Does this also work with a 4ch receiver?
@AndrewNewton 4 жыл бұрын
Where would you plug the second ESC in?
@pi_ 4 жыл бұрын
In my case I only need two motors. I read that you could plug the esc's into ch1 and ch4 but then it also said they used 4 mixes so I was wondering if you could use the fs-i6 even though it only has three mixes. I totally am a noob so I don't know if this is a dumb question or not. Best regards
@AndrewNewton 4 жыл бұрын
Different radio system I guess. With the FS-i6 the first 4 channels are fixed as Aileron, Elevator, Throttle and Rudder. 5 and 6 are spare channels.
@sziluchannel 5 жыл бұрын
5:05 the wing is moving
@BlueCharlesTrafter 5 жыл бұрын
its fineeeeeeeeee
@user-nq9gs2sp4z 5 жыл бұрын
ديدو من فضلك ترجمته الي العربية
@AndrewNewton 5 жыл бұрын
If I knew Arabic I could. Can you get automatic Arabic subtitles?
@Arlingtonsjw 6 ай бұрын
now add a gyro....video
@sagarbhagat6033 3 жыл бұрын
Thank you so much
@AndrewNewton 3 жыл бұрын
You're most welcome
Кушать Хочу
Рет қаралды 7 МЛН
Robinson Foundry
Рет қаралды 1,1 МЛН
RCwithAdam
Рет қаралды 43 М.