What you Will Need: bit.ly/2IFFQXT (Multi Module Choose FRSKY)

Crossfire with i6s please???

That's pretty nice, dude! 😃 I'm going to be waiting for part 2!

Is it possible to install ExpressLRS on flysky i6x?

If i use frsky reciever Will I get frsky range and telemetry?+ can I do it on fs-i6s?

This is a $40 module on a $40-50 transmitter. Can't it be cheaper? I mean, after all is said and done you still have a FSi6. You could buy one of those Jumper TS12 for this price and not have to mod it.

Can't wait for Crossfire! Would be a really great step for the flysky!

Man I doing this right now and could really use part 2!!

I'd love to see a latency comparison between this and an FrSky Q X7.

Finally you did it!! i've been looking for a Flysky I6 to FrSky mode for so long! Thanks mate like always great vid, keep it rocking!

that great you did it,, im using frsky dht module in fs-i6 its super simple to add ppm wire and +- and ready to go, but you need to cut power wire for existing stock module otherwise it will suck battery quick.

Did you decide to come-up with this idea because the iRangerX iRX6 multi-protocol modulue is no longer available for the FlySky FS-i6(i6x) radios ?

Just tested something very similar to this on a friends radio (Also FS-i6). Can confirm that it works flawlessly with TBS Crossfire. I did something like this about 3 years ago to a old Turnigy radio;) Keep it up! Having a 3D printed enclosure for Crossfire or other modules on a FS-i6 will change the transmitter game.

You should make a video on how much more latency it adds

You should 3d print new backplate of the fs i6 with module bay

Will this muilt prodacal work on a fs-i6s

Will it work on the flysky fs i6s

On the back of these transmitters, there's a circular DIN-plug, the trainer port. That can be used as an input to simulators, or connecting a trainer-transmitter. Doesn't this port also output PPM? Wouldn't it be possible to use this port instead of running the wires from the inside like you did? Seems neater, in my opinion.

Why does the i6x show that it can already do sbus? I tried binding it to a xm+ on that setting with no luck.

top Vid man... I couldn't afford long range till I saw This! thanks dude. I got the Rm9 but how do I bind? just the normal way with the Flysky raido? I'm saveing up so mid next year for Qx7 that good but how can I bind receiver?

could this mod apply to elrs modules too? or the just don't work over ppm? And I with radios that are not CRSF capable..

Cool! What is that piece you connected to the xm plus? I need one . Thx

Could u measure the mW coming out of the transmitter as well as maybe the performance of the antenna and compare those to the frsky’s antenna and transmitter. I know u r going to do a range test, but doing these separate experiments as well as the range test would help I think, because they have fewer factors and chances for error

i fried my mainboard and broke the screen do u know if i can remove the rf module from the main board and use on a arduino i want to change the main board but use the original rf module

Hello bro how can I make my holy stone 700d goes higher? Is there anything I need to buy?

can't wait for the range test

Im desperate for a way to bind my Turnigy I6-S to ELRS. Had anyone done it? Thanks

Can I do the same for fs i6s model.?

Here we go again...another great video. Thank you. Is the board a finished product?

This is so awesome that your doing this...i debated on getting rid of the FlySky i6 controller and changing over to FrSky. But i learnt how to fly FPV on the I6. And yes even though its a cheap radio im attached to it. So if i can mod it to be multi protocol radio. Thats awesome brother...(Also keeps me from having to change everything FlySky reciever as well)..Highly appreciated you doing this tutorial and your time...much respect 😎 PS: i will be following your vids...but have no way to 3d print ...so ill be trying to mount it internally?

Does this come with the wires?

Thanks for the awesome video mate! I did the same thing and I got my crossfire powered up and bound with nano RX. However I don’t know how to configure the radio further, could you please help me out. Thanks a lot ! Cheers!!!!

dose this flysky work with m2 rc helicopter?

Hi! I did it yesterday. Its work fine. How to switch between two modules? I would like to use both modules with two receivers and i would like to choose between with a switch. Like Frsky Taranis x9e.

After crossfire please consider doing wirh r9m.

Couldn't you have just used the ppm signal from the port on the back. I am pretty sure the connection where you connect for simulators has a ground, ppm, and I believe a 5v as well. Would mean Les soldering and disassembly. Oh and will this work with the modded 14 ch firmware on the i6

Ok so say you do this, but do it with the r9m module. How would you get Rssi on the osd. Would you have to use the analog rssi from the reciver? Or is there an easier method? I assume telemetry won’t work will it?

What about telemetry data? Do we get it to show on transmitter's screen? Otherwise we will have to rely on OSD or a timer for line of sight flyin.

Lo posso mettere comunque con la radio aggiornata a opentx?

do you think my jr 9303 would work using this unit, there is a setting to ppm mode, of course there is a jr modual port.

Waiting for part 2

Can you share with me the circuit diagram of flysky? been googling for it but couldn't find one.

Can I use this module to convert an old Futaba radio to 2.4?

Hi. I tried your method but the r9m won't bind just giving me red solid light. Is there a specific firmware to use on the r9m and flysky fs-i6x

If I am using TBS CROSSFIRE I does not need the multy protocol modul, right?

i have a Q: when you boot up the FS-i6x with the module soldered on. won't it "on" also the flysky tx circuit ? so meaning that there are two circuits that are "on" . am i right ?

Did you find out for sure if this supports bayang?

Can i do this to my nirvana?the XJT will only let me bind one rx,and i have a few.

How cool! would this work with any other brands? What potential mods are there for the fs i6s? I have done the 2000mw signal booster and its amazing for the price.

Hi, whats the different between this module and IRX4 Plus?

With this module, when it's bound does it count as one of your models on the screen?

Figure this out for the DJI FPV transmitter please

Cant find the part 2 anyone have a link?

i have the blue one, nathan vertaile sent it to me it's absolute garbage been trying and searching how to update it for weeks have a usbasp now, but that is giving even more troubles i don't know how to solve i'll try to get this green one seems to work a lot easier does it also bind to flysky? why i wanted to install a multi module is, because i broke the internal one

is the multi protocol mod required to make the R9M mod work from part 2 thanks

Awesome bro. Gonna get a module ordered up now lol

Hay bra is this the same as crossfire moduel

We need help getting that beeper to work for low rssi and low battery alarm and timers. On the fsi6 . And great video I'm gonna do this instead of spending way too much for the jumper t16 .

No entiendo porque no hiciste una segunda parte del vídeo o si es un fake porque yo lo he intentado con los mismo pasos y no funciona.

Bro where do you find those wires,are they shipped with the module?Also can I with this mod bind to frsky lbt d16?

Awesome video! Works 👍

How do you bind the TBS crossfire from the other video to a receiver??

Will it work on fs tm 10

Where is the "Part 2"? :)

will this work with Fs I6s??

man what you are doing is just amazingly useful ! :D

Legend haha I've got two i6xs . Waiting for my nirvana to ship .

Will there ever gonna be a second part le this?

Why use the frsky module not the flysky?

Will it work with the flysky i6s?

Hey can I connect an ezuhf to this radio?

Hi waiting for part 2 bro. 😀😀

Can you make a vidieo whit flysky nirvana end crossfire please 👍 the other youtubers are not as good at showing it as you are

The module doesn't support diversity?

I'm using a deviation devo 7e mod with flysky. The firmware is open source and makes binding multiple models very easy.. sucks that you have to plug and hold buttons on the board

how about crossfire on turnigy evolutiion???

good job.i will try this..thanks for this video..very good video..👍

Hey what's up drone mesh my name is Ray Ray and I got a little thing called a d d i c c t e d - 2 d r o n z anyways I might be considerably older than you but you are my hero I idolize you in what all you can do with drone and fpv you are so no you are a genius I have mimic everything that I am able to do myself because I am on a fixed income I mimic everything you do I'm fixing to put the modem in my FlySky i6 cuz I have several mjx bugs series toy drones to the modem to Austin things for me just got to wait and save up to get it anyways my question is right now I bought my first field drone but it was already put together in the Box yks 250 with from the factory doors cc3d get to 1808 Motors and it came with the FlySky I6 controller I know all the cheap set up but I've got the case Co 3 fpv with the fatshark goggles that are actually donated to me woohoo LOL anyways man I'm looking to get range out of this but right now I can't even get it to come back on before it was like any other drone in and out you know that the sticks in and then out you can't start that like this now and it won't start at all I cannot get it to come on because when I received it I've only flown it one time I've had it almost a month and have flown it one fucking time I'm so pissed now one of the ESC Chaz went out why I don't know cuz I hadn't flown it and I've been having to fly my CD ass toys because I have to fly everyday I just went through a divorce because of my drone I love my drones anyway this is a long story I'm sorry look man I just want to let you know that I enjoy your videos as soon as I get some money I'm going to contribute to the channel promise I need to get a hat or shirt something how much are they about 20 bucks I got to do my module first but you take care of man keep them in the air you know I keep mine in the air every day if I don't working on it all night lying all day peace out

Does d8 work?

Would I be able to do this with a spektrum transmitter??

Mesh do you lose the ability to use flysky?

I have flysky i6x.. To buy the module, i need to choose, wich model, JR/FLYSKY /or FRSKY? Thanks and keep your good work..

thanks' love it, wish I could afford it!

Okay, good mod but where do you place the component?

You are awesome!! :D

i have a FS-T6 and haven’t use it for years. Will this module work with FS-T6?

It will work with the frsky r9m?

I have done the firmware mod on my i6 and so can transmit in s.bus rather than I.bus. If i were to use the Frsky r9m module, is there a pad, that i could take the S.bus signal from, and use S.bus instead of ppm with the r9m. This way there you wont have the ppm latency and if you were to use the r9 mini receiver you can get rssi from a built in channel. Would this Work?

You don't get rssi in OSD, do you ?

Whatt ? Godbless you dronemesh

There is ppm out in the "trainer port" on the back

Did you try crossfire already? I mean do you know it works?

FSi6+TBS Crossfire, it's gonna be awesome🔥🚀✌🏼

DUUUUUDE PLZ ... CROSSFIRE PLZ!!!

Will it work on turnigy tgy i6?