2 Methods - Heat Embossing and Toner via a Laser Printer Refer to Blog post for all links to the materials used in this video! www.poppyandmintdesign.com/blog
Пікірлер: 250
@sallymoodley14224 жыл бұрын
Your free hand writing is brilliant.
@pamelasertich98506 жыл бұрын
Thank you for all that great information. Beautiful writing and cards ❤️
@thuongle-zhang91808 жыл бұрын
Great video Molly! The foil makes the cards so fancy!
@ganesanthangarajesh51317 жыл бұрын
Thanks Brindha for creating awareness about these artistic skills in me. Very good Brindha.
@LadyJP6969 Жыл бұрын
Love your penmanship, thanks for sharing!!!
@chitowntexan Жыл бұрын
GORGEOUS handwriting!! Very beautiful 😍
@Victoria-UK6667 жыл бұрын
Your writing is STUNNING! 💕
@PoppyandMintandLife7 жыл бұрын
Thank you so much Victoria! :) Sorry for the late response!!
@stephencichocki52256 жыл бұрын
Love the proverb!!
@candilabonte43863 жыл бұрын
Thank you so much for explaining about the laser printer using toner I was wondering why you needed to use a laser printer over and ink jet printer for that method
@ReiraniSan8 жыл бұрын
I love those thank you cards! Absolutely lovely :)
@mollyknabel60088 жыл бұрын
Thank you so much! :)
@carlaarce35873 жыл бұрын
This is so helpful. I'm actually looking at DIY-ing all of our wedding invites instead of asking someone else to do it for me, and kinda felt lost with foiling - not sure how to do it exactly and now knowing that there are different ways to do so, made me feel extra lost haha. But thanks to this video, I now have a better understanding how this works. I just want to know, though, since I think it wasn't mentioned, how hot should the laminating machine should be? I have a laminator, but it has this temperature control switch I can adjust. Thanks in advance!
@JennCampbell7 жыл бұрын
I would keep the used foil and put it over black paper, frame it and hang it on my wall. 😍
@PoppyandMintandLife7 жыл бұрын
Jennifer Campbell I have done that! I like the negatives :)
@matriarchfacilitator6 жыл бұрын
Jennifer Campbell good idea Jennifer
@kerryhampson52396 жыл бұрын
Great tutorial. I’ve followed the second method perfectly but seem to be getting the black bits like on the first demo. I definitely have a laser printer and the correct foil. Any advice?
@nobelrovirosa8799 Жыл бұрын
Great presentation! Thanks
@carlajohnson85747 жыл бұрын
Love these thank u cards. Beautiful!
@PoppyandMintandLife6 жыл бұрын
Thanks Carla!! :)
@SusieJefferson7 жыл бұрын
Seen this and subscribed immediately. How nice to have an alternative to the Minc - I bought one and had to send it back immediately as defective. They hadn't changed the electicals to be compatible with UK voltage! (It was getting hotter and hotter - after a single use - AFTER I turned the machine off and removed the plug from the socket...)
@PoppyandMintandLife7 жыл бұрын
Hi Susie! Oh no!! Has the laminator version worked for you? because I actually plan to update this foiling video very soon and I am going to be recommending the Minc machine over it! haha -- hopefully that issue gets fixed for the UK!
@Armin-Academy7 жыл бұрын
Well done! Was informative 👍
@turanbey34 Жыл бұрын
Nice job. As a textile printing specialist, I would like to make a small suggestion for powder adhesive. In order to make foils in those powders, the device pressure must be high. at least 4 5 bar pressure and 150 degrees operation is sufficient. It may not work well on small devices. Finally, there are TcrafTx brand textile foils that we highly recommend, you should definitely try them. Thanks for the information, good work
@IimmanSdexterXanАй бұрын
what beautiful writing XX
@christasonner65397 жыл бұрын
awesome video! BTW your lettering skills are really something to be envious of!!! so perfect !! love it !
@PoppyandMintandLife7 жыл бұрын
Thank you so much Christa!! Sorry for the late response here!
@rosaliareyes37787 жыл бұрын
I love your fonts.
@PoppyandMintandLife7 жыл бұрын
Thank you so much Rosalia!!
@debhendrick98736 жыл бұрын
I love the way that turned out
@PoppyandMintandLife6 жыл бұрын
Thanks Deb! :)
@debhendrick98736 жыл бұрын
np i love this crafty world
@ceciliasanchez36696 жыл бұрын
Love the video! If I was just testing out, would any thermal laminator work?
@mgibbs71247 жыл бұрын
Love it
@kirstieann88886 жыл бұрын
This is brilliant thank you!!! Do you happen to know if you can do it over the top of an injet printed picture? So for example, print the backround image on my inkjet, the the bits I want to foil through a laser printer and go from there? Would it work? Many thanks!
@dineshsaur66010 ай бұрын
Las fotos son de una calidad aceptable y la rapidez de impresión es buena
@paulettelewis77796 жыл бұрын
This is beautiful. I do have a laminated machine. Can I use this technic for my wedding invitation
@covid-19inthistogether966 жыл бұрын
Can you recommend a good basic affordable B&W lazer printer? Which one did you use in the video? Thanks so much!
@mandyajel7 жыл бұрын
I have a very old laminator but I've got some foil that I've ordered online coming tomorrow, I can't wait to try the laser printer method out as I have a black laser printer also :D going to be doing some designs and seeing how they come out. Thank you for this tutorial x
@juneheng1177 жыл бұрын
Hi, I'm very curious about the laser printer method. Did your result turn out like what's in the Video?
@mandyajel7 жыл бұрын
yes it did :) it did a really good job. :D
@intexmobile2723 жыл бұрын
You are clear brother. Your video tutorial full detailed.
@winnieapoo6 жыл бұрын
I am considering starting to create greeting cards and am so thankful that I stumbled upon your video!! I never knew these things existed!! I read thru all the comments, and even went to your materials page, but I couldn't find what type of paper you use or recommend for card making. If you have a minute and could respond, I'd greatly appreciate it ! Great video by the way !!! Thank you !!!
@MrLaTEchno6 жыл бұрын
Very Sweet indeed I like it a lot....... THNXS for sharing your works here on Y-T. ;-)
@covid-19inthistogether966 жыл бұрын
Can I ask what weight of card stock you used for your card when you used the laminate method? Thank you!
@alanahayes74746 жыл бұрын
Hey Molly! When you do the second method are you running it through twice? Thanks!
@ruciokas5 жыл бұрын
Amzing, thank you :)
@tabashrafi93736 жыл бұрын
You have BEAUTIFUL penmanship!
@PoppyandMintandLife6 жыл бұрын
Thank you so much! :)
@rhblake6 жыл бұрын
Would this work using only the pen? Or do I need to use the heat set embossing powder too?
@andres-pro63346 жыл бұрын
hola muy interesante...le echas alguntipo de pegamento al texto para que el papel brillante pueda quedar adherido precisamente en las letras?
@melizasim72765 жыл бұрын
I love that phrase and design that you did from proverbs. do you sell the digital for this? lovely
@JWR0036 жыл бұрын
Method 2 did you use the black pen for the laser printer. -or- Do you run the print process with the foil overlay while never having to use the pen at all
@crystallp62748 жыл бұрын
I really like the laser method! It seemed to be very clean and laminators are inexpensive. I could use a monochrome laser printer for Copic digistamps and foil. Nice! Thanks Molly!
@PoppyandMintandLife8 жыл бұрын
+Crystall Pearson - Hi Crystal! So sorry for my delayed response but thank you so much for leaving feedback! I really appreciate it and I'm glad it's going to be a good solution of you! :)
@firnamuntu38577 жыл бұрын
Crysta
@fewminutescraft7 жыл бұрын
nice video
@TotowizardZ4 жыл бұрын
Like your video - I saw someone else posted that when using the laser printer method - little specks of foil seem to cling lightly all over the paper. The foil on the image is great but those "flecks" - any ideas? Thank you
@SummerRuby865 жыл бұрын
Do you know if it's possible to print an background image from an inkjet, then overlay with laser printer and foil? Would the inkjet ink interfere with the laser printed part?
@simpatiko2k57 жыл бұрын
Hi, can I use the laser printing technique on to book cloth for bookbinding purposes?
@sarai91025 жыл бұрын
Hi. I need to foil standing zipper gusset pouch bags. Will the laminator work for this?
@kae-jg6 жыл бұрын
Hey! Thanks for the tutorial very helpful :) just got a quick technical question haha, how would you do to foil just some parts on a card, with laser impression? Let's say you print a woman portrait and you want to foil only the hair. How would you do that? I'm trying to find a way as I'm not sure how to achieve that ^^' thank you!
@kraftnkreatg72585 жыл бұрын
What type of laser Printer do you have? I'm looking for a good inexpensive one.
@ranman58635 Жыл бұрын
I love this. Designing a pickguard for my friend's guitar I'm making for her. I want to gift it as she is a friend. I love the scripture you used. Is there a way for me to get the same image as that? I mean, where do I get the image? Thanks for all your lessons. I do headstock logo's too. All new for me.
@kiwi737036 жыл бұрын
Nice! What font did you use for the script?
@nstudiodesign5 жыл бұрын
I know you have been doing this for a while, but your ability to create fonts and or play with your bare hand is amazing. Did you go to Font school? lol i have to download fonts all the time and play with them on Illustrator. Nice job!
@helenradley44984 жыл бұрын
Does the foiling with a laser printer only work on light coloured cards rather than dark colours as when I tried on a navy one, the whole foil just imprinted onto the whole card. Thank you.
@CalligraphyArts7 жыл бұрын
Love this How-To video. Many thanks for your clear and informative tutorial & beautiful lettering!
@PoppyandMintandLife7 жыл бұрын
You are so very welcome! I'll be updating this foiling video very soon with how I do things now that I've learned some tricks of the trade over the past year so stay tuned to my instagram/newsletter or subscribe here to get that alert if you're interested! :) poppyandmintdesign.com Thank you so much for the kind words! Molly
@CalligraphyArts7 жыл бұрын
Super! Glad to follow your work! Best wishes :)
@itzruok64415 жыл бұрын
So we should digitise our lettering, print it on paper and then use a laser printer for foiling?
@bjsmoker7 жыл бұрын
Great video!!! I do not have a laser printer, but maybe I can come up with one somewhere in the near future. I do however have the heat laminator. I'm really looking forward to trying the flailing with the laminator. If you have any suggestions for a cheap laser printer let me know!!
@PoppyandMintandLife7 жыл бұрын
amzn.to/2sMQjIj Here's the one used in the video! I've since recommended that the Minc Machine be used for it's heat settings but it's a bit more expensive. Both can be found on Amazon!
@vedgyan20246 жыл бұрын
Which type of foil paper staff nd microne use in this printing
@Tampaidoodekdek6 жыл бұрын
Ummm... May I ask? I want to know whether it needs to be only this kind of foil. I live in Thailand, so I don't think I can find it and just wish that other foil sheets may work.
@mjabbar285 жыл бұрын
Does the laser print foil scratch off or will it remain as it is
@huyenhuynh97196 жыл бұрын
Can you have me with the name of the white board you use at 9:27? Thank you so much. You are talented with your beautiful hand writing.
@Rumeel127086 жыл бұрын
So what does the laminator do to get the foil exactly where you want it?
@govaleng.24114 жыл бұрын
The way to use Laser Printer because it will make text on the paper get embossed?
@jeurie22187 жыл бұрын
Thank you so much for this video! I recently got into calligraphy etc, and with a wedding upcoming, I wanted to experiment with embossing powder and gold foil. Only for the latter one, I don't really know on which website to order, as some seem not to be very trustworthy. Where do you get yours? Thank you so much!
@PoppyandMintandLife7 жыл бұрын
Hi there! If it's your own wedding, congratulations! :) So I would want to first say that the embossing to foiling method is definitely not as clean as the laser printer method. Also - I'll be updating this video with a new blog post/KZfaq video shortly with things I have learned and the materials and methods I use NOW. Stay tuned to my Instagram, Newsletter or subscribe here to get that alert! :) poppyandmintdesign.com As far as buying embossing powder-- I've gotten supplies from Simon Says Stamp, Amazon, in person at Michaels/AC Moore/Hobby Lobby etc. The materials I share in this video are all brands that you should be able to find in those places! Good luck! :) Molly
@johntarquino56286 жыл бұрын
I have a question i have a design but there is a graphic in the BG where i dont want it to be foiled , do i cut it out to where the text is and feed it like that ?
@stefnic235 жыл бұрын
Does the laser printer method work with an LED Laser Printer?
@suem35967 жыл бұрын
Nice writing!
@PoppyandMintandLife7 жыл бұрын
Thank you so much Sue! (sorry for the delay in my response!!)
@ellaholder3336 жыл бұрын
which laser printer did you use please? Many thanks.
@csillapuskar36675 жыл бұрын
Can i ask you what program do you use to create your designs?
@diyersetc32067 жыл бұрын
thank you very much for making this video and sharing this technique. now i need not buy any fancy tool/s. ill just buy a laminator. more power! and i wont have to buy dies....
@PoppyandMintandLife7 жыл бұрын
Hey there! You are so welcome! and while the methods I show in this video WILL work with a laminator -- I have found in the past year that I get the best results from the Heidi Swapp Minc Machine (that is more expensive) but it has multiple heat settings which I find give you the best coverage of foil and not speckled. Stay tuned to my instagram/newsletter or subscribe here so you get alerted when I write that new blog post! poppyandmintdesign.com Thanks so much for commenting! Molly
@Emeraldwaltz5 жыл бұрын
I’ve seen this but with plastic sheets instead of paper is it the same thing?
@nyc2caligal7 жыл бұрын
Omgosh! This is very informative. I really do want to foil everything now! 😂
@PoppyandMintandLife7 жыл бұрын
nyc2caligal it becomes addicting! :)
@mfiorito5550 Жыл бұрын
Is it possible to do the same foil method (with the laminator for heat), but with thin/medium natural fabric like natural like linen or cotton?
@sakshichaudhary74426 жыл бұрын
any kind of laminator will work
@sujiteerayi47986 жыл бұрын
Will this work on notebook cover
@histerp517 жыл бұрын
This is beautiful....But boy do I wish I could write like this...Did you take classes in writing? Thank you so very much.
@PoppyandMintandLife7 жыл бұрын
Hi Sheryl!! Sorry I'm so late in responding to these comments! Thank you so much! - I never took any classes ...just a lot of practice and figuring out what pens and styles work for me!
@user-ss8ez5hk3p3 жыл бұрын
Hello
@polkadotteapotdesigns7 жыл бұрын
These are amazing! This might be a silly question but how do you get the foil to stick with the second method? x
@PoppyandMintandLife7 жыл бұрын
Hi Laura! I didn't rewatch the video when I saw this comment but I think the 2nd method was the laser printer? Is that right? The laser printer is the best way to go and the foil adheres through the laminator via the heat that is given off and the TONER that is within a laser printout. The toner heats up and the foil sticks to it. Let me know if I answered the wrong method! :) Molly
@cookiessprite5 жыл бұрын
What laminator is this? I don't think mine gets hot enough
@micaisabelbituin95026 жыл бұрын
what the temperature setting of your laminator?
@jonathandunston33747 жыл бұрын
Really cool! 1) Somehow the foil sticks to the laser printer ink? 2) The laminator is kinda generic? Do you think I could do this on the cover of a thin Moleskine type notebook or would a laminator not handle the extra thickness? Thank you for your help.
@PoppyandMintandLife7 жыл бұрын
Hey Jonathan! Yes! so the toner that is present in a laser printout (NOT present in an inkjet) is what the foil adheres too when heated through the laminator. The laminator method CAN be a generic type...however, I'll be updating this foiling video very soon with methods and materials I use these days since learning some of the best methods for full coverage results and in that video, I'll be sharing that I believe the Heidi Swapp Minc Machine is the way to go (as opposed to the cheaper laminator). As far as the thickness able to go through the machine - on any generic laminator- I'm not sure what it can accommodate. I know the Heidi Swapp Minc Machine says up to the width of "chip board" but I've never attempted that before! Good luck! :) Molly
@jadebethj48074 жыл бұрын
If you don't have a heat gun can you use a hair dryer? I saw a comment where someone said they did but there wasn't any photo or anything.
@kimberlyjones64765 жыл бұрын
I wonder if you would have gotten better results with the first way using a carrier sheet to press the foil sheet down. Thanks for the ideas.
@katrinajoyce52602 жыл бұрын
What brand toner laser printer are you using?
@craftera.a35095 жыл бұрын
Can I use an iron for the first way
@MrGarden86 жыл бұрын
I'm just wondering if with the first method, you skipped the embossing powder and went straight to the heated laminator with the foil. Would you get a better result?
@stephaniemccolaugh31323 жыл бұрын
I think the embossing powder might mess up the machine
@annabellong36467 жыл бұрын
Great video, thank you :) Can I ask if you can use any kind of laminator? And if there is a specific type of foil to use for the laser printer technique?
@PoppyandMintandLife7 жыл бұрын
Annabel Long the laminator could really be any that you find but I will say, that after more than a year later from me creating this video, I now recommend an actual Minc Foil Machine instead of a laminator. I'll be updating my blog in the coming months with everything I recommend now. Follow me on Instagram if you don't already to get the alert for that new post! And foils- I've used Deco and Minc brands
@_JoyceArt7 жыл бұрын
Is that pen exceptionally sticky and slow drying? Because I have the versamark version of it, and whereas the pad version stays sticky long, the pen version gets soaked up real fast. I've tried several types of paper, because I thought that might be it.
@PoppyandMintandLife7 жыл бұрын
Hi there! Sorry for the late response on this! That was a versamark brand but I have tried others since and I particularly like the Zig Scroll and Brush Emboss pen and also the Ranger brand bullet tip ones!
@jasmineh35876 жыл бұрын
cool
@nathangray83546 жыл бұрын
The toner version.. Do you think this method would work if I printed a letter out and did this? We lost our mother last year unexpectedly during the holidays and going thru her stuff I found a letter to me and my brothers and thought this could be a nice gift to copy it like that for my brothers..
@PoppyandMintandLife6 жыл бұрын
Hi there! I'm so sorry to hear of your loss :( I think this would be a great memory for you and your family! As long as you print the letter with a laser printer/i.e with toner - you'll be able to foil! Good luck and I hope your family loves it!
@DonnaJo34527 жыл бұрын
Another way to fall would be instead of burnishing with a bone folder you can put it through your diecutting machine with cutting plates on top and bottom. That will work really well. This idea came from Stacey at ScrapbookingMadeSimple.com.
@PoppyandMintandLife7 жыл бұрын
Donna Jo are you referring to when using the embossing method? I've seen that done by a few paper crafters too! :)
@ushangan43667 жыл бұрын
Hi good work u r calligraphy is very good
@PoppyandMintandLife6 жыл бұрын
Hi there! thank you so much! :)
@rosetoellner88467 жыл бұрын
I have a laser printer and a heat laminator. But when I try to foil it leaves foil over the entire area of the foil. Not as much over the "blank" parts, but still splotched all over with foil. What am I doing wrong?
@PoppyandMintandLife7 жыл бұрын
Hi Rose!! I'm sorry for the late response on this question! So are you having the issue where your final product has pieces where the foil did NOT adhere so it looks splotchy? Or there are areas on the white space where you do not have a design where foil is being laid down? The answer for both situations is that yes it's frustrating a lot of the time and both of these issues have happened to me too! Since publishing this video 2 years ago, I've definitely come to find that DIY foiling is a finicky hobby :) (So awesome when it works great though!) - I plan on creating another video, new and improved, where I actually recommend spending the extra money on a Minc Foiling machine because the added heat settings make it worth it. I've had to play around with my personal computer and printer's settings to get it to work just right without having those bad areas but one suggestion I have for the issue of foil being put down on your paper where the design is NOT...rub your paper down lightly with a dryer sheet and then with a clean paper towel before running it through the laser printer. That has worked for me to make sure that there is nothing on the paper that the heated foil will stick to except the toner design.
@bountyarchive9 ай бұрын
Does this process work with book cloth?
@nessyness4157 жыл бұрын
could you please link the laminator you used? Thanks!
@PoppyandMintandLife7 жыл бұрын
Hey there! I apologize for such a late response! Here was the laminator used in my video but I will say that I've since been convinced that spending the extra money on the Minc Machine by Heidi Swapp is worth it for the added settings of heat! amzn.to/2sMQjIj - I would consider it if it's in your budget!
@taryngray-delahunty40427 жыл бұрын
Thanks for a great video! What brand of laser printer did you use in this?
@PoppyandMintandLife7 жыл бұрын
Hi Taryn! :) Thank you so much! My laser printer is an HP Color Laser Jet Pro MFP M277dw!
@taryngray-delahunty40427 жыл бұрын
Thanks for the reply! :)
@loriejoy14253 жыл бұрын
May I ask what kind of foil is used? Cuz the last time i ask they laugh at me for asking a color gold aluminum foil and instead gave me a metal foil 🥺😅
@foxyloxy48997 жыл бұрын
can I use a laminator for this with a laser printer?
@PoppyandMintandLife7 жыл бұрын
Foxy Loxy yep! Or the Minc Machine is what I recommend these days - by Heidi Swapp
@arhandiwan24943 жыл бұрын
Can i use color printer for this...?
@melindagibson86065 жыл бұрын
I have a brand new laser printer and for some reason the foil doesn't attach to all of the black toner. It's driving me crazy. any ideas? I put the heat on 5ml and it still didn't help. There's a lot of breaks in the foiling. Thanks!
@user-eb9im2zy5e4 жыл бұрын
Is a heat-based coating machine?
@MelissaMontgomery7 жыл бұрын
What do you think would be faster or cheaper to enhance bride + groom's names on wedding invitations? The laser printer foil method, or using gold embossing powder & heat gun?
@PoppyandMintandLife7 жыл бұрын
Hey Melissa! So typically with wedding invitations, you can speak with your stationer about getting your invites foil STAMPED -- it's a much cleaner look to the foil, it's depressed into the paper (like letterpress) and it's gorgeous...it's also much more expensive than the methods I'm sharing that are more DIY. With Foil Stamping, a metal plate must be made with the design to be imprinted with foil and to create the plate can be costly. (but that plate would be used over and over for the amount of invites you had.) If you are trying to foil on your own at home - it will still be easiest to print them yourself with a laser printer and then cut the foil to match up with the names only on the invite. One warning though! Make sure that you then cover the rest of the toner ink from the laser print out that's NOT covered with foil (so maybe like the details at the bottom, RSVP etc.) with a plain piece of printer paper before sending it through the laminator or Minc Foiliing Machine. If you neglect to do that, the toner will come of on your transfer folder or onto the barrel within the laminator machine and every time you use it after, the words from the invite will be lightly 'printed' onto what you fed through. Let me know if you have more questions! Molly
@MelissaMontgomery7 жыл бұрын
Thanks for the tips! I don't have a stationer -- I'm a graphic designer so I'm doing all the design and will have them printed somewhere. Foil stamping is out of our budget so I've been trying to figure out which elements I want to be metallic and how I'm going to achieve it.
@Fdhlh7 жыл бұрын
Can the embossing pen ink use as an alternative for toner ink? Will it work the same?
@PoppyandMintandLife6 жыл бұрын
Hey there! The embossing pen ink is an alternative to the toner ink - but toner and printing is much better result!