Ford 5.4L 3v Triton Low Power P0011 P0021 VCT Timing Error Diagnostics

Рет қаралды 246,661

3 жыл бұрын

Come along as we show you how easy it can be to diagnose VCT timing error codes on the Ford 5.4L 3v triton engine.
These are the Parts and Tools I Recommend:
Ford VCT Solenoid-
amzn.to/2GPa8KX
NOID Light Test Kit-
amzn.to/3izVy7j
Forscan is free Ford Specific Diagnostic Software:
Download Here-
forscan.org/home.html
ELM 327 Adapter I Recommend-
amzn.to/2GC6dBj
As an Amazon Associate I earn from qualifying purchases.
My Automotive Repair Shop BSG Automotive-
www.bsgautomotive.com
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 387

@FordTechMakuloco 3 жыл бұрын

These are the Parts and Tools I Recommend: Ford VCT Solenoid- amzn.to/2GPa8KX NOID Light Test Kit- amzn.to/3izVy7j Forscan is free Ford Specific Diagnostic Software: Download Here- forscan.org/home.html ELM 327 Adapter I Recommend- amzn.to/2GC6dBj As an Amazon Associate I earn from qualifying purchases.

@mikewest2019 3 жыл бұрын

I just ordered the OBD Link Mx+ that you supplied in the link above from Amazon. My question is, when you go to the ForScan link you gave, which link should I download for a windows 10 laptop? I may have overlooked it, if so I apologize

@deadlyking5308 3 жыл бұрын

Thank you for all your hard work, you help out a lot.😀👍

@larrymorris9812 3 жыл бұрын

]

@jon-christiankaczor5384 3 жыл бұрын

Ford tech i was the one that called and bothered you last week regarding my camshaft caps they i was worried about regarding there wear and I would like to say thank you for putting my mind at ease with the wear I have. I have done quite a few of these engines but haven't in the past 10 years and your videos definitely make the process less of a headache and show the more thorough way of repairing these engines which i am about to go out and install my new camshaft and 24 lash adjusters and followers and chains with .y mellimg m360 pump and hopefully im praying this 189,000 mile motor fires to life without a hitch since i have spent 2400 on parts and tools which is the same amount I spent on the truck. Thank you

@nghia7paulette 3 жыл бұрын

Is there a 5.4 3v timming kit you recommend?

@brad3139 3 жыл бұрын

*i cant believe we get content this good for FREE*

@drymoonproperties 3 жыл бұрын

I totally agree this man is amazing! He often blows my mind!

@jayschmidt6070 2 жыл бұрын

you pick up Knowledge wear you find it 😉. Yes this guy is Great

@Chico-td2fy 3 жыл бұрын

Truck looks familiar 👀 ...still running perfectly ...thanks👍👍

@memadmax69 3 жыл бұрын

We're starting to see more and more of these older VCT systems come in to the shop and this little bit of info is gold. TY very much.

@-DC- 3 жыл бұрын

The information on this channel is incredible can only thank you for your dedication 👍

@rycodge 3 жыл бұрын

This is exactly what happened to my 2005 project F-150. I did the timing kit, oem phasers, M340HV, 5w-30, etc, but I left the original VCT solenoids knowing I could replace them later if needed. Sure enough, 500 miles later and I was getting P0021 and a rough idle when randomly pulling into parking lots and the driveway. Thanks again, your videos and hard work is much appreciated.

@kechumgreen8893 Жыл бұрын

i have a 05 150 too. several years ago the motor acted like it was going to jump out of the truck. took it to the ford store and a few thousand dollars later it was fixed. just 2 or 3 years ago it did the same thing. took it to a friend and he replaced a vct solenoid. just last week it happened again. it had 13 codes. i changed the oil and put 2 new duralast vct valves in and all is well. thanks, to all the youtube, ford mechanics.

@tyleryoung8823 3 жыл бұрын

The FORD GURU strikes again! Learning so much about these engines and I barley see them come in the door anymore ! Great tip about running the self test can’t wait to try that out on some ford vehicles ! Keep the great content coming!

@frozenstang3868 3 жыл бұрын

Always good to watch your stuff, thorough and to the point with good instructions.

@daleposey450 3 жыл бұрын

Another great video. I have a 06 f150, 5.4, 3 valve 210k miles. I anticipate that I will be replacing the phasers, timing chain and related systems, and oil pump soon. Your videos have relieved my fears and buoyed my confidence to replace these things.

@marcustucker8301 3 жыл бұрын

Great video. You give good instructions on how to go through the troubleshooting process. I think you have a bright future in teaching automotive sir

@Hutchy45445 3 жыл бұрын

"There you go, seen it move" Idk about anyone else, but I didn't see the spool move lol. Another great video 👍 I don't have any issues, but I still watch these videos, as they come out. 😁 I can binge watch his videos, all day..

@FordTechMakuloco 3 жыл бұрын

The valve is inside, when it moved in the bore the entire solenoid jumped, watch again.

@jimgeorge4677 17 күн бұрын

@@FordTechMakuloco I watched it at least 5-8 different times, and I too never saw any movement. Even went full screen at 1080i.

@garryr 3 жыл бұрын

I just did my first chains and phasers on a 2008 5.4L 3V. Wanted to say thanks. Your videos were a great help, and yes ..... I made my employer go with all ford parts.

@shaneoconnor1154 Жыл бұрын

Brother your video saved me so much time. VVT was new just as I was getting out of the auto shops and moving into heavy equipment. I read the data and came to the idea it was a VVT issue. Your step by step really helped me pinpoint it and make a proper repair the first time! Thanks man!

@Aardvark49 3 жыл бұрын

Great video Brian. For me (a DIYer) the biggest tip you give is the oil flow from bank 2 to bank 1. That and the instructive display on your scan tool as to what abnormal and normal operation looks like. I have a 2008 Explorer Sport Trac 4.6L 3V, now at 165k miles. I've had no timing problems at all but your descriptive work is really helpful. Thanks.

@edgarenamorado886 3 жыл бұрын

I have learned so much from u and , Ron diesel Tech even when he’s not here with us anymore, thats how I become a Ford technician all the tips and advices I ve taken from both u God bless u work

@TheMrmmkkpro 3 жыл бұрын

Great info, im old school and learning, my buddy bought his 2006 navigator over, rough idle and P0011 bank 1 and p0022 bank 2. All I have is a code reader so in researching fixes for him. Reckon I will try vct first, thanks for posting this. 👍👍

@johnnyrodgers9794 Жыл бұрын

Happened on your channel last year still not caught up with all your videos but what I’ve seen so far you are the best teacher out there SMA was my favorite he applauded you on fixing ford vehicles

@garymcmullin2292 Жыл бұрын

this was a valuable advisory for those of us doing a timing job. I have worried some about what may not go right and if any parts would not be up to snuff, on the job I have ahead of me. There have been a lot of you tube comments from channels featuring 3 valve timing issues that reveal not every job goes well and there are complexities of the parts and repair to be regarded with due caution. This video lays out everything was done right, just amounts to a premature component failure, even though it was the best part available. A guy has to keep in mind these possibilities and for sure use the highest level of parts quality available, which for this application is genuine ford factory replacement parts. Stuff happens!

@chrisdeschamps7900 Жыл бұрын

Thanks so much. I had codes P0011 and P0016. Dealership wanted a bundle and my regular mechanic wanted to go straight into the engine for timing issues. 2 VVT solenoids later and the problem is gone. I have a Ford Fusion with a 1.5 ecoboost. Keep up the good work.

@ryansteele5970 10 ай бұрын

Thanks soo much for your videos. I have been sitting here watching all possible videos for the problems with my 5.4 3v. Still lots to see but love the content.

@coinsagE46m3 3 жыл бұрын

Just bought a 2010 F150 with 122K and the 5.4 3V and just threw the P0011 and P0021 codes. Oil looks clean and full. Hopefully one solenoid is my issue like yours, thanks for the info!

@DannerPlace 3 жыл бұрын

These videos are great (I have a 2010 with the5.4L-3V).

@freshfission5886 3 жыл бұрын

Love your dedication to make these videos...I have a 2 valve 5.4 but I still watch these 3 valve videos

@allmotorhash 3 жыл бұрын

2v best 5.4

@austinpotter4970 3 жыл бұрын

Wanna trade lol

@superduty4556 2 жыл бұрын

@@allmotorhash 4v wasn't too bad

@jerryodell1192 3 жыл бұрын

I’ve been a subscriber for a while thank you for your info it got me through three timing chain sets very helpful.

@Paul-oh4fe 3 жыл бұрын

Great video and diagnosis and i'm grabbing those noid lights. Thanks for the link.

@jamesplotkin4674 3 жыл бұрын

Another great troubleshooting video, Brian ;-)

@chieft3357 3 жыл бұрын

I can't thank you enough for that info and demonstration.

@drymoonproperties 3 жыл бұрын

Me either it solved my problem! And I spent way way less money and time to actually fix my truck.

@matthewchatterson5075 3 жыл бұрын

Good stuff man. I'm an ASE Mastertech and work on these all the time and you just taught me a few things. Thanks 👍

@jamesbruno5896 3 жыл бұрын

Awesome info Brian thanks for sharing!

@Ben-qy7cl 2 жыл бұрын

Ive been looking for that software for days! Finally! Thank you Makuloco! Hope i can find my problem now on my shitty ole 3v

@1995flyingspur 3 жыл бұрын

You're awesome!!! Thank you so much for these amazing videos!!!

@edman1015 3 жыл бұрын

Thanks again for a great video - Doctor Ford Tech

@PatriotDad 3 жыл бұрын

Another great detailed video!

@davidwestby6527 3 жыл бұрын

Helping me to understand alot,as I am old school wrench.

@beezertwelvewashingbeard8703 3 жыл бұрын

If you can dodge a wrench, you can dodge a ball.

@titusparker9857 3 жыл бұрын

I very much appreciate your content, has saved me 💰💰💰💰

@m.campbell2776 3 жыл бұрын

Very thorough ... U are a great instructor .

@dianaberry2961 11 ай бұрын

Thank you for your video it was really really good thank you for explaining everything I still have to figure out something how the test that solenoid without being a true mechanic

@SultanAamh 3 жыл бұрын

Keep going 😃 for the great 👍 work 🙏🏼

@standhd 2 жыл бұрын

Your computer screen showed a Mustang briefly at the start of the vid. NICE!

@dana3520 3 жыл бұрын

You help me so much. Thank you for al the videos.

@TP-xi7ri 3 жыл бұрын

Thanks for making another excellent video. TP

@DependableAutoTruck 9 ай бұрын

great video thanks for sharing most of the fords i work on are 2 valve but this is good information to have when i need it

@yourlocalalexis4578 3 жыл бұрын

learned some good tips from this video!!

@blainebennett 3 жыл бұрын

Many a Phaser on 5.4 have been changed unnecessarily. I fixed many by doing just VCT solenoids and recommending Motorcraft 5w50 synthetic oil.

@m.campbell2776 3 жыл бұрын

You're fantastic brutha !

@jcortegaxxx 2 жыл бұрын

Thank you for the videos. Super good info. My question is I have a 2010 f150 5.4 that’s is making engine noise how can check the cvt Solenoid without removing the valve cover.

@robertovillarreal8602 3 жыл бұрын

Ive got the 5.4 and this was very incitful

@chuemoua6834 8 ай бұрын

Great explanation and repair

@r.lorenzo2937 2 жыл бұрын

That is great information. Thank you.

@randybirkeland3331 3 жыл бұрын

What am I missing? At 16:34, just before the "em hm" You saw it move, I see nothing moving?

@FordTechMakuloco 3 жыл бұрын

You can see the whole solenoid jump up.

@randybirkeland3331 3 жыл бұрын

@@FordTechMakuloco OK, I see that. I was expecting to see a spool valve move inside the housing.

@MrBeats_6000 3 жыл бұрын

lol I came here to say this I didnt see anything move and was so confused lol

@samsteel4456 3 жыл бұрын

I replayed that 5 second clip about 7 times and couldn't see anything except the little jump, but I didn't realize that's what we were looking for. I too expected a spool valve.

@tonyibarra9171 Жыл бұрын

You are beyond Awesome 👌🏽 👏🏼

@donnierobertson3088 3 жыл бұрын

Great job and video

@rickketchumn4458 3 жыл бұрын

I’ve got a comment does go with this video but I went to my ford dealer today to get some orange coolant for my 2012 f 150 said they didn’t make the orange any more it was yellow why did they stop making the orange and will I have to do a flush to change it over thanks best ford video on KZfaq

@prospexican Жыл бұрын

great video and tips by the way

@jasonhopper5072 3 жыл бұрын

Just had to do both of mine on my ‘08 f150. -assented side is a major pain in the rear, but fixed the problem. Still had the original ones in it. Phasers and timing components changed before I bought it but did not change the VVT solenoids. SMH.

@reylizalde5383 Жыл бұрын

VERY INFORMATIONAL , THANK YOU

@robertquinones943 3 жыл бұрын

Hey man i wanna start off by saying your videos have taught me alot and made me some $$ Thank YOU. for doing what you do .! .. im at a point now that i need to sharpen my diagnostic skills so im looking to get a better scanner .. mine is a cheaper Launch that doesnt do much .. What kind of scanner do you recommend .? Ive always wanted to know how you look at live data thru a laptop .. What kind of program is this or what would i need to purchase.?

@Airman.. 3 жыл бұрын

Brilliant dude 👏

@shannslam5434 3 жыл бұрын

Ive watched a lot of very helpfuI ford 5.4l videos you've posted. Thanks for all the work you put into them! I have a question regarding an issue with the timing chain. Mine is on a 2006 lincoln mark lt. The chain has no dark links and was hoping to not have to pull the front of the motor apart. I have the driver's side valve cover off and the links are stamped morse USA. There's nothing I see that can visible show me if the chain jumped a tooth. Thers no slack in the chain and the guides look good.

@luc917 2 жыл бұрын

great video!

@rndemetro 3 жыл бұрын

Had timing chain kit job done at 113k miles for $2500.00 with Dorman revised phasers, Melling 340HV, Ford solenoids, tensioners, guides, etc. 127k in and P0012 pops up while I’m going 45 mph. Popped my hood and unplugged the solenoid and limped home. Phaser broke and the solenoid was bad with it. Just put Ford phasers in, this time- $2100.00. Fingers crossed.

@johnknox5692 3 жыл бұрын

nice work thk for post this video

@mikecont9742 3 жыл бұрын

Great video

@alexdobrov2506 3 жыл бұрын

Hi! If I remember right you had a video about locking the phasers but I can’t find it now. On my 05 Ford Expedition one chain tensioner has failed. I want to do hole timing job but I’m not sure what is it better to replace phasers or to lock them. What would you recommend?Thank you for spending your time and sharing all this information!

@ernieengineer3462 2 жыл бұрын

How about some content on setting up and using FORScan? There are already some but your videos are the best!

@rickdeckard1075 Жыл бұрын

yeah i never diagnose without my FORSkin

@hawaiianf1504 3 жыл бұрын

Awesome vid!! Thx Bruddah

@georgebell3964 2 жыл бұрын

Great job

@jeremiahcox4036 3 жыл бұрын

Thank you for your videos have you ever seen a OEM phaser malfunction I put less than a hundred miles after doing the timing job. It's on the bank one side started to come apart and no it's not my first time in job I've done on these three valve

@karljohanngumundsson5334 2 жыл бұрын

Hi Brian. What version of Forscan are you using? Thank you for all your great video's man...!

@rodneymiddleton9624 3 жыл бұрын

Could you put air to the port in the cam to see the phaser operate like air checking a transmission? The first one I did I made the mistake of getting a kit from Napa which must have had aftermarket junk in it and it didn't last very long. I learned my lesson. If a customer doesn't want genuine Ford parts they have to provide them and I take no responsibility. What do you think about the phaser lockout deal? Thanks for the video.

@clarkkent4991 2 жыл бұрын

Smh…. Just wowwww. Man… you are AWSOME !

@andrewfpfl08 3 жыл бұрын

Do you have a video for the 5.0? Can phasers be replaced without removing timing cover like the 5.4

@gorybonghit3211 3 жыл бұрын

Hey man! love your channel. i watch these for fun lol do you know if the o2 sensor in the catalytic converter has any affect on performance? i want to put straight pipe cut outs between the sensor closest to the manifold and the cat. my truck is highly modified and would love to breathe more. im thinking the o2 sensor in the cat is just for emissions purposes? any feedback would be appreciated!

@Hudbudd 3 жыл бұрын

The 3v is a beautiful motor once you understand it. I actually enjoyed doing the timing job on mine. Very cool design

@fatherdahl4577 3 жыл бұрын

Glad someone shares the same thoughts

@TheQuickerkitty 2 жыл бұрын

Hey man... Great videos... very informative and very thorough... I've got a question about our 2008 Ford Edge with a 3.5... how can I contact you outside of this video?

@rockyeaglebarger8179 3 жыл бұрын

Bank 2 cam phaser has an L in this video, your other videos regarding cam phasers have an R to identify their position on the camshaft. Mistake or misview on my part? Great work btw, your vids have helped me out tremendously over the years.

@FordTechMakuloco 3 жыл бұрын

I don't make mistakes on a such a simple job that is literally all I do all year long and has become second nature to me. Each phaser is universal with both R and L markings and can be used on either bank.

@JonD831111 10 ай бұрын

Question here. I know this might make me sound stupid. Just want to start off i have learned a significant amount about these engines (especially the phaser stuff) from you videos, they are very on point. My buddys truck I'm trying to help him with is throwing the p0011 and p0021 code (factory oem phaser, after market cheapo vct's, but brand new vct's). When I data log the truck the only time the phasers appear to be off is at partial throttle mainly only when you are just maitaining speed. They stay around 40 advanced when maintaining on adverror, and when it is doing that the duty cycle is at 100%. Short of him just buying new oem phasers and vct's I'm having a hard time decifering if this would more than likely be a phaser or vct issue. Thanks for any advice or which one you would lean more to being this issue.

@timothybaker6252 3 жыл бұрын

I am thinking about buying a 06-08 Expedition. Without knowing the history of a vehicle, would you recommend putting a can of engine cleaner in before oil change to make sure inside engine is clean?

@bengrummet370 3 жыл бұрын

What about p0012 issues on 2016 f150 5.0. Stumbles at idle. Intermittent stalling, and intermittent CEL illumination. Cannot find any thing ultra helpful. Does it with clean oil. Cleaned air filter and throttle body. Any advice would be appreciated.

@ericdouthit3597 2 жыл бұрын

I did a full timing job on a 2005 5.4 following all your steps and recommendations. Before start up zero oil pressure with the crank sensor unplugged. Decided to try to crank it and see if the oil pressure would read running and it did. Runs good at idle. Give it a slight load and it misses like crazy. Cheap obd2 gives p0012 p0021 p0201 p0174 p0351,3,6,7,&8. Does this sound like oil issues? I'm 99% sure I'm not a tooth off.

@raelectron4360 3 жыл бұрын

Otherwise, very nice and helpful video.

@dylanschutt8565 3 жыл бұрын

I did my VCTs my self and I never pulled the covers it was risky because when I got that o ring off my Hex bit cam off and was resting on that timing chain omg J was so scared of dropping that and never seeing it again

@JohnNorris411 2 жыл бұрын

So all those readings on your laptop come from the wireless obd in your link? And the software is free? Is this also good for a non-ford vehicle, such as Toyota/Lexus?

@Chuck88vert 3 жыл бұрын

Your the best thanks for the work to make these videos. Its helped me big time!!!!

@andrewspringer_ 3 жыл бұрын

what software/equipment do you use for diagnostics?

@aaliyahrachelle2661 3 жыл бұрын

I have an 08 Ford F-150 that had a brand new transmission installed by Ford by the previous owner and my current engine has some of the regular 3V issues like the broken manifold studs, leaking valve cover but so far no valve issues. I am looking to buy a crate engine with the upgraded oil pump and some of the common issues fixed. Where would you source a 5.4 crate from or even a “refurbished” 5.4 with the oil pump replaced.

@prospexican Жыл бұрын

you could also power probe the old solenoide w power probe using the right polarity, since polarity cant be swaped.

@RobertKohut 3 жыл бұрын

Nice!!

@nathanmaier4044 3 жыл бұрын

I have a 2005 Ford F150 Lariat and it will probably need the Timing chain kit done to it. Until I can figure if I'm going to do the job or a garage in Cincinnati, would it be a good thing to upgrade the oil to Full Synthetic 5W 30 or stay at 5W20 till i get the repair?

@jerryhernandez96 3 жыл бұрын

I have a 06 f150 5.4 3v and I was wondering if its ok to still use it with the phaser locks with no tune? Thanks

@jasonkennedy2348 9 ай бұрын

I thought you post a video for changing the VCT solenoids where you stated to run a BG products engine flush prior. But I can’t find it and not sure which one of the BG flushes to get? I thought you had them listed as well in the description but don’t see it. Can you list which ones to use if that is still a valid step you recommend? Thank you

@dp9897 3 жыл бұрын

WHAT DO YOU RECOMMEND TO REMOVE ENGINE SLUDGE ? TNX

@hectorruiz5821 3 жыл бұрын

Hey you have some great info on your videos I have a 2005 Ford F-150 5.4 that It won’t start . Bank 1 has 70psi and bank 2 has 90’-100 psi the motor will not start I have no codes I have fuel pressure . It cranks but no start .

@jncplacido 3 жыл бұрын

You da man!

@dancooney6529 11 ай бұрын

I have a quick question. I have a 2007 f150 the 5.4 l 3 valve. I just replaced the cam position sensors and she starts to chug at idle a little bit here and there. The question I have is that well-known tick that these engines have is on the right hand bank and upon startup it doesn't do it right away, it starts after it's ran for about 30 seconds. Could that be a lash adjuster?

@jessesmith4474 3 жыл бұрын

Hi wanted to ask you what could cause the phasers not to phase I did a complete timing job and am only getting a code for the driver side for the cam shaft position sensor

@Ben-vj7su 3 жыл бұрын

Having VCT symptoms on my 2015 F150 5.0 with no codes. Thinking maybe I should change them all out.

@f2cmadmaxx 3 жыл бұрын

5w30 makes sense to me on the Triton, to you, does it make sense in the Coyote too?

@oby-1607 3 жыл бұрын

My question is why did this happen? I believe you said the customer only got 10,000 miles out of a timing rebuild and then the VCT solenoid error codes. Was there defects in the windings or something in the oil contributing to this, or what? He should have gotten quite a bit further down the road before having to go into the engine again.

@rocnrolalnight 3 жыл бұрын

I replaced both VCT solenoids on my 06 F-150 5.4 3v. Bank 2 still running ruff when it warms up. I unplugged the VCT selenoid and it stopped. It is making that phaser knocking. Should I replace the phaser? Going to check for a brake in the wires before I do anything ells.