Ford F-150 5.4L 3v Triton Engine Runs Rough: P0340 P0344 P0345 P0349 VCT Timing Error Diagnostics

Рет қаралды 293,907

3 жыл бұрын

In this video we walk you through real time diagnostics of a P0345 P0349 error codes on the Ford 5.4L 3v Triton Engines, the results may surprise you!
These are the Parts and Tools I Recommend:
Ford Phaser-
amzn.to/3ijl2H3
Ford VCT Solenoid-
amzn.to/3gZwYw0
Noid Test Light Set-
amzn.to/324Gtpl
Forscan is free Ford Specific Diagnostic Software:
Download Here-
forscan.org/home.html
ELM 327 Adapter I Recommend-
amzn.to/2GC6dBj
As an Amazon Associate I earn from qualifying purchases.
My Automotive Repair Shop BSG Automotive-
www.bsgautomotive.com
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 473

@FordTechMakuloco 3 жыл бұрын

These are the Parts and Tools I Recommend: Ford Phaser- amzn.to/3ijl2H3 Ford VCT Solenoid- amzn.to/3gZwYw0 Noid Test Light Set- amzn.to/324Gtpl Forscan is free Ford Specific Diagnostic Software: Download Here- forscan.org/home.html ELM 327 Adapter I Recommend- amzn.to/2GC6dBj As an Amazon Associate I earn from qualifying purchases.

@matthewblackwood4704 3 жыл бұрын

Help please.... I pulled into the driveway and my gear shifter went soft on me and wont select gears, now i cant get it into park and i cant start the truck....f150 5.4 2006.....i dont know what to do

@matthewblackwood4704 3 жыл бұрын

@Jesse Ajuda 5w-30 no doubt

@michaelwerbick 3 жыл бұрын

Matt Blackwood try starting in neutral. Also see if this is similar issue. 🍻

@matthewblackwood4704 3 жыл бұрын

@@michaelwerbick I found it the transmission shift cable was broken thanks

@dxta7360 3 жыл бұрын

@@matthewblackwood4704 check transmission fluid first. If fluid is OK, it means the transmission neutral switch is not properly engaged in park, so it won't start. Make sure you can pry the transmission gear knob area with a screw driver, to help engage the transmission in park.

@Three9sfine. 3 жыл бұрын

This guy is amazing ! He has saved me so much time and headache. We are lucky to have this type of in depth honestly and clarity. I enjoy all of his videos even when its not the car i have his information can translate to most applications. If you have not subscribed and left a like now is the time. He always has great info you would be a fool not to subscribe😬take the time show your support!

@austinhamann704 3 жыл бұрын

That engine looks more like a salvage yard engine instead of a Reman

@rodneymiddleton9624 3 жыл бұрын

I've seen some that the scrap yards so call rebuild themselves. It may have been a scrap yard take out from a crappy rebuilder too. I've never seen a blue one like that either.

@FordTechMakuloco 3 жыл бұрын

Yeah it was bad on the outside but definitely a reman engine inside.

@michaelbenoit248 3 жыл бұрын

If you’re having issues w these things, it’s time for a good quality reman crate motor, don’t waste your time with the cam phasers, they would be working if there was oil pressure, & because they’re not they’re garbage along with the motor. Grenade the motor then drop a crate motor in it not from the crap yard that’s not a 3v & it’ll be fine.

@MJ-iy4fb 2 жыл бұрын

That's a Krylon rebuild. Fresh coat, and it's good to go!!

@jerrywilderman1569 3 жыл бұрын

You always pray a man with this level of expertise is working on your vehicle.....not the pothead who lives down the street. I am impressed with his abilities to diagnose and his knowledge of the product he's working on. Well done Sir.

@twistedwrench490 3 жыл бұрын

U are the best ford tech available as usual great job!

@FishFind3000 3 жыл бұрын

Stephan Paris hes not a ford tech. He’s a kid with google. This guy has actual certifications.

@halleffect1 3 жыл бұрын

@@FishFind3000 certs are one thing, experience and talent is better

@arkk1 3 жыл бұрын

Do you ever work on the new rangers?

@galenmarek8287 3 жыл бұрын

I was a Ford tech for around 10 years, and then went to parts after a back injury. This guy is the real deal, he knows his stuff. If you have a Ford, you should be subbed, he gives out overloads of great useful info. I’ve seen a lot of good techs, and I’ve seen guys who couldn’t fix a sandwich, this guy is awesome!

@fatherdahl4577 3 жыл бұрын

A hero we don’t deserve but a hero we need

@ashtonprecht6658 3 жыл бұрын

Always enjoy the F-150 5.4 3v videos, keep them coming!

@brianstouder1360 3 жыл бұрын

This guy is on point. Im in the middle of a complete timing job and feel comfortable doing it because of his videos

@logansf1508 3 жыл бұрын

Only live like 4 hours away from this guy and I’m really thinking of bringing my truck there. My 2010 is having so many issues now. Can’t do everything myself

@fredbach6039 3 жыл бұрын

Really great video! Everything made perfect sense and I really like the thoroughness of the disgnostics.

@theredbaron057 3 жыл бұрын

Your videos on Ford's VCT systems have been so helpful for me to understand what's going on with my 3 valve Mustang. THank you!

@chrischiampo7647 3 жыл бұрын

Thank You Master Ford Tech 👨🏼‍🔧 I Learned a Lot From This and All Your Other Videos 😀😊👍🏼

@MrNewsitall 2 жыл бұрын

Love your videos. So clear and concise. Lighting is always great too. Very east listening and watching. I learn so much from you and your efforts to show us your daiky encounters working on vehicles. Thank you.

@johnrunck849 3 жыл бұрын

You’re a great mechanic. I got a 2006 F150 5.4 Harley Edition. I learned so much from your videos and done a lot of my own work cause of you. You’re my go to. Just sucks I live in an apartment and can only do so much. But keep up the good work. I’ve learned so much off KZfaq

@edman1015 3 жыл бұрын

So much knowledge needed on just this one model and model engine. There are many models of other manufacturers out there just like this one. Auto (Technicians) not mechanics are now needed to keep our autos running. Another great job Ford Tech showing everyone the knowledge it takes to work on autos of today.Good job keeping up with new technology. It changes every day.

@jeffthejinjer 3 жыл бұрын

Yeah it's absolutely crazy the amount of knowledge it requires to be an Auto Tech, and now with electric cars you need to be an Electrician as well! Some say it takes more knowledge than a Medical Doctor to be a good technician....and how often does the human body change...its the same make and model everytime 😁

@chieft3357 3 жыл бұрын

As always, amazing video explaining every aspect of diagnosing a problem.

@VentureStJohn 3 жыл бұрын

As usual very informative. I'm waiting for your general testing manual to come out. Thank you

@DS-wt7ul 3 жыл бұрын

Great video as always. Have a great Labor Day!

@jrcordero8194 3 жыл бұрын

@FordTechMakuloco, I’d like to thank you for all your videos! I removed and rebuilt my 5.4 3vavle by watching your video’s!

@ryanwalker2299 3 жыл бұрын

Love your videos man, but I can't watch your 5.4 videos anymore, I already fixed the phasers, cam chain, tensioners, spark plugs, VCT solenoids, and oil pump. I don't want to jinx it anymore 😂

@FordTechMakuloco 3 жыл бұрын

lol I hear ya!

@lowkey_treal3341 3 жыл бұрын

I’m currently looking to change my VCT solenoids

@scottbridges5066 3 жыл бұрын

As long as you put a good oil pump in and not a stock Ford unit. you will probably not have another issue. Please tell us you used a Boundary or Melling or Livernois or Moroso or PCE. If you used a Ford one, I sure hope it was a Ford Racing model like the one used in the GT 500.... Good luck.

@tonyhernandez3873 Жыл бұрын

Me to

@lawrencecavens5760 3 ай бұрын

Thank you so much Brian , Like always Another Golden Video on diagnostic Training. From all of us who have these engines - I can't say enough to how much help your videos are Your professionalism really shows how you care. The Lord Bless you Brian..

@onogrirwin 3 жыл бұрын

I hope you make some ad money from these vids, because you sure have helped me a lot over the last few years.

@robertrossi8997 3 жыл бұрын

You make diagnosing look easy Brian but you actually have so many years and knowledge of auto issues and Ford experience your like a super hero and a great teacher wrapped into one. Thanks for another great video.

@FordTechMakuloco 3 жыл бұрын

I try

@robertrossi8997 3 жыл бұрын

And you succeed!!!

@sanity1977 3 жыл бұрын

Another great how to video! Thanks for sharing your expertise

@ecobuilder2996 3 жыл бұрын

Many thanks for posting this!! I've had the MIL lit for a couple years now for the P0340/0344 code. Kept putting off removing the valve cover to check the "fingers" on the phaser. Will run these diagnostics first and see what comes up. Excellent advice my friend!!

@spencersmith4900 8 ай бұрын

Hey eco builder, were you able to figure out those codes? I have the same ones

@leoumana9117 3 жыл бұрын

Damn son. You're the Ultimate Ford Mechanic.

@closertothetruth9209 3 жыл бұрын

Love the things you teach us, very interesting

@mikeadler434 3 жыл бұрын

Once again Brian, great video! Thank you Sir.

@alexjusto4435 3 жыл бұрын

I dont own a truck or even a Ford. But this channel Is Gold.

@patriotkennethburlingham7059 3 жыл бұрын

Great video Brian! Once again.

@IKCS1 3 жыл бұрын

Great information what a fine technician enjoyable to watch

@brodyz8327 3 жыл бұрын

I have the same code popping up P0345. I changed the CamShaft sensor, no luck... I pulled the VCT solenoid and cranked the engine just like you did... Still gets me the error code. Now... I'm going in to check the phaser. It's been worked on before. Prior owner had some work done on it. I'm fearing they also used aftermarket sub quality parts. Now. I'm going to fix it. Your videos are so helpful. I'm legitimately done taking my cars and trucks to mechanic shops. I get it all done myself now with the help of Hanes and Chilton books plus your videos. Thank you!

@leahgodwin6912 4 ай бұрын

Excellent video. Perfect explanations and visuals. Awesome!!

@kbranchjr 3 жыл бұрын

thank you for what you do . I was born in to the auto-motive trade. So I known it was not the career for me,(Big mistake, Who would’ve known shops would be charging $125 an hour and up) but I love being a at home tech. Now that I’m furloughed my hobby is my Company now thanks for keeping me updated with the new technology; Iron sharpens iron

@Bandit69ply 3 жыл бұрын

We have similar problems at the plant where the 5.0L is built. If the exhaust VCT isn't installed correctly it will ruin the VCT and nose of the cam when it goes through the machine that checks the timing. I said all that just to agree that if you don't install the VCT correctly and torque it properly you're wasting your time and money. Great video and i agree with another commenter that this guy is thorough and explains what to look for and what not to do on certain repairs.

@gilfaver362 3 жыл бұрын

Terrific analysis and explanation.

@garypollack6948 3 жыл бұрын

Awesome video....still loving my 2v

@mikeaho4143 3 жыл бұрын

Great info Brian. Thanks for sharing

@rrmech11 3 жыл бұрын

Excellent Diagnosis 👍👍

@hutchinson54 Жыл бұрын

That’s probably the thing I enjoy most about your videos: You don’t just start replacing parts and say “Maybe this will work” or “Maybe this will fix it”. You actually take the time and do actual diagnosis and do a process of elimination. Part by part, step-by-step. This is the way it should be. But as you already know, a lot of dealerships don’t do that. They just start replacing parts and hope that it’ll fix the problem. Keep up the good work.

@rudyhunter8493 2 жыл бұрын

VERY Well done.... Im a GM tech and not really familliar with Ford... very logical and clear presentation of accurate diag... bravo!

@jg6142 3 жыл бұрын

Great video very informative thanks John

@hawaiianf1504 3 жыл бұрын

Bruddah as always, you rock!

@stormchaser8472 2 жыл бұрын

thankyou so dang much for these videos!! im looking to buy a 2007 so im using these to see what im getting myself into hehe

@carlosdevora9010 3 жыл бұрын

Your videos are awesome thanks man

@mikecont9742 3 жыл бұрын

Best video and information out there.

@throttletherapy9998 3 жыл бұрын

Great diag! It seems like I won't see these 3valves for a while then all of a sudden they start coming in one after another, at my age of 56 and working on so many different car lines I definitely need a refresher in these engines from time to time. Down here in South Louisiana we don't have to deal with rust and most of these trucks are in good shape, but if I can learn any thing about any vehicle especially these engines I'm all ears. I'm one of the few shops that will work on these engines, a lot of the other shops have been burned on them so they won't touch them. Great video looking forward to the next one!

@FordTechMakuloco 3 жыл бұрын

Those other shops just didn't know what they were doing these engines are very simple to diagnose and fix.

@jamespn 3 жыл бұрын

Thanks for the advice on the vacuum brake bleeder, I bought the one you recommended on Amazon and it worked great. I bled the brakes on my ‘15 Jetta and it was a breeze. On my ‘13 Pathfinder, Nissan recommends disabling the ABS pump by disconnecting the negative battery terminal before bleeding the brakes.

@TheUltimateCrash1990 3 жыл бұрын

Have you tried "speed bleeders"? Makes solo bleeding much easier.

@dpyles9396 3 жыл бұрын

Excellent video! Thanks!!!

@Markomyt1 3 жыл бұрын

I love the high tech tool for the VCT Seal at 13:50!

@MichaelJohnson-pq2ue 3 жыл бұрын

I work in a big dealership...man I give you credit, you really know your stuff. If you ever consider moving south (Roll Tide) I got a spot for you! I assume your a senior master ?

@edwardzamorski3711 3 жыл бұрын

Thanks for another fine video very interesting

@gonzgarr1592 3 жыл бұрын

another great tech info video thanks

@jonh7472 3 жыл бұрын

About to do mine! Thanks bro

@terryhoffman795 3 жыл бұрын

thanks for the vid. i'm having the same problem with a reman engine also! only 40,000 miles on it.

@poogan1239 3 жыл бұрын

This screams: "I found someone to do it cheaper" all day long lol

@acemobile9806 3 жыл бұрын

Got exactly what he paid for, too.

@jerrywilderman1569 3 жыл бұрын

Cheaper isn't always best. His knowledge is impressive.

@anthonyrybczynski5420 3 жыл бұрын

I'm working on one of those tomorrow. Job was done 2 months ago with Ebay parts and already got the idle shivers. The customer came to us before but we would not install his ebay parts. He left and came back a couple of days ago.

@FLseahawk 3 жыл бұрын

Excellent video!

@tomstarcevich1147 3 жыл бұрын

I'm glad I've got the 5.4 liter 2 valve much better engine had my 99 ford f150 for 21 yrs now no problems 😊

@juanestrella9014 3 жыл бұрын

Good diagnostic 👏👏👏

@333alliedeagle 3 жыл бұрын

Great job!

@richardculbreth8153 2 жыл бұрын

Thanks man,I'm having problems like this!

@josephlitto8672 Жыл бұрын

Yor videos ae amazing. Pulled a P0022 & P0345 even with both VCT connectors disconnected. Stalling on idle and making a lot of noise!

@MrPincheloko 3 жыл бұрын

Great video my friend good information

@mikechiodetti4482 3 жыл бұрын

My first time at seeing one of these apart. Where I worked before retirement, we had many Ford "F" series, (with 4.6, 5.4. 6.8 engines) but I never saw a phaser let go.

@brentbradley6711 3 жыл бұрын

This one had a loose bolt on it.

@brianhawk1854 3 жыл бұрын

Great work.

@goneballistic 11 ай бұрын

These are such great videos

@rickjohnson1632 3 жыл бұрын

Good stuff 👍

@wall4xxx 3 жыл бұрын

On long run if you cheap you’ll pay at end of time with multiple issues nice diagnostic keep up good work

@wbshelton2 3 жыл бұрын

Thank you for another great informative video. It sure is a heart breaker that the AM timing sets are under $200.00, while the FOMOCO kits are over $1,200.00! I sure wish a company would make quality affordable replacement AM parts.

@FordTechMakuloco 3 жыл бұрын

Ford kits were down to $590 at one point.

@Burrkilla 3 жыл бұрын

Another great video.

@jeremiahsmith1447 Жыл бұрын

God bless you and your family!!!

@clearwood 3 жыл бұрын

Thank you!

@paulfiebke3909 2 жыл бұрын

Keep up the good work

@redeye1773 3 жыл бұрын

detailed well done

@gfysyoutube 3 жыл бұрын

Good job!

@jowens1126 Жыл бұрын

You are the 5.4 3V expert.

@ChancetheCanine 3 жыл бұрын

Thx Brian!

@jameswasher3938 2 жыл бұрын

I'm so glad I bought my 2003!

@PhillyDee215 3 жыл бұрын

Diag & visual💯

@ozzstars_cars 3 жыл бұрын

Anytime you buy a used car part that has been painted it's called a "spray and pray" cause you never know how good or bad it's going to be. This vid should be sponsored by Dorman, making Ford phasers that fail since 1918.haha 🤣 Great job Brian

@memyself6483 3 жыл бұрын

Had codes 0345 and 0022 so I replaced driver side vvt solenoid and camshaft position sensor. Changed oil and filter. Those codes went away, next day CEL came back on this time with code 0012. Not sure where to go from here. Thank you for all the great videos!

@FordTechMakuloco 3 жыл бұрын

You have no control over the vct system, it definitely needs a timing job or more depending on the condition of the engine.

@jeremymckenzie691 3 жыл бұрын

Great video

@scottbridges5066 3 жыл бұрын

Always enjoy your videos. Wouldn't drive a Ford truck just because the cab forward makes for miserable wrenching.

@tomaspaez8352 3 жыл бұрын

You the best Tec mak

@leegran6394 3 жыл бұрын

Great video I want you to help me with my MKZ hybrid

@IAMNOSLEEP 3 жыл бұрын

Thanks for sharing... Cheers.

@servinoseguera 3 жыл бұрын

where you have yo shop because I have 06 roush f 150 runing rough if push gas to1500 rpm thru go updown on up do not stay sterile and before have mis fire on cilinder 7 change coils sparks an fuel injector the cats converter and still the same

@purecuIt 3 жыл бұрын

Dude I have engine knock and had some of those codes apear, along with a rought idle than stall out when engine is hot at low rpms. I got it working better now after a motor flush and some thicker oil. Anyways I will have to so this job soon and this video is excellent. You make the best F150 repair vids, thank you bro!

@popeyeandstraussmx4165 3 жыл бұрын

Probably cam phasers. Those are what make the knocking noise at least

@markk3652 3 жыл бұрын

Try Lucas synthetic oil stabilizer to buy some time. 1 qt added to your next oil change might help keep it going.

@popeyeandstraussmx4165 3 жыл бұрын

Purecult if it stalls out it could be the solenoids or it could be your fuel module

@hunterprice287 Жыл бұрын

You ever do the timing job or anything? I have the exact same issue

@purecuIt Жыл бұрын

I've been running okay with frequent oil changes (every 5k miles) and a bottle of oil stabilizer now for 2 yrs since I got the truck. It seems to be worse sometimess, better at other times. Runs fine, no stalling. In fact, someone pointed the ticking out to me saying they had a Triton engine do this but I no longer noticed it until he pointed it out. I drove 2000 miles cross country and towed a trailer with a car on it no problem last year.

@FLseahawk 3 жыл бұрын

My 2017 Gen2 3.5L had Ford phasers and the cab came off x3 before 30,000 miles to replace them. I traded out of it. I also had similar issues with my three valve 5.4, however at much longer intervals. I can now say that I am back in a pushrod vehicle. I will go EV before I ever purchase another gasoline engine with highly variable VCTs.

@MrJak427 3 жыл бұрын

Sheldon Trooper maybe a 7.3 gas 🤷🏼‍♂️

@IHaveArrived 3 жыл бұрын

@Sheldon Trooper My 2004 5.4 I bought new might be your trucks twin. I'm just shy of 207,000 miles myself and it still runs great. Only thing I've had to do was change the spark plugs (7/8 broke though). Fortunately, I haven't had any issues with the transmission.

@prevost8686 3 жыл бұрын

Sea Hawk Toyota and Honda have had relatively few issues with their VVT systems in well maintained vehicles. There’s nothing wrong with the design. It’s the junk parts combined with the lack of maintenance that has made Ford’s such a nightmare. GM’s V-6 engines aren’t having major problems as well due to garbage O.E. Parts.

@texasmethod 3 жыл бұрын

I've been watching you're vids nonstop I've watching the timing diy 5 times. But 200k miles still good wth first chk engine light in yrs cat went out. Why is mine doin so good we switched to 10w 30 at 150k not even camnohaser knock and I've got all the service paperwork ont he truck. 07 ford expedition ebel

@blackcastle5140 3 жыл бұрын

New Intro/Logo Approved.

@gmtech2012 3 жыл бұрын

This is great stuff! I plan to use the exact same diagnosis. Last year I did the whole timing job: the chain, phasers, solenoids....ALL Ford parts. I put a Melling 340HV oil pump in too. Sometimes when coming to a stop, the timing on one bank will not go back to base. It's like it's stuck activated.

@FordTechMakuloco 3 жыл бұрын

That is an oil pressure and volume issue. If you are sure everything was installed properly and the pan has been cleaned out with no startup rattle then I recommend performing a crankshaft end play check. If ok then use 5w-30 oil, if the concern is still there then use Rotella 5w-40 oil.

@gmtech2012 3 жыл бұрын

@@FordTechMakuloco I still have to drop the pan and check/clean the pickup tube. I don't recall any broken pieces or chunks missing from the teardown but I suppose I could find something wrong. I'll report back on what I find!

@gmtech2012 3 жыл бұрын

Today I dropped the pan. Found a chunk of what looks like a guide in the pickup screen. And also a lining on the bottom of the pan with grit, looks like from the old chains. Cleaned everything and reinstalled. I checked crank endplay too, very little movement. Less than 004 I am STILL getting this to happen. I'm just like WTF at this point

@gmtech2012 3 жыл бұрын

Oh and I'm getting 21psi oil pressure when this happens. It remains steady and doesn't bounce around on the gauge.

@TheUltimateCrash1990 3 жыл бұрын

@@gmtech2012 Did you check the cam cap ends for gasket debree? Radiator cam cap on the drivers cam, and the cap next to the firewall on the passenger side cam? There is a gasket that goes behind where your oil filter screws on, on my triton that gasket was breaking off. I found a few pieces of it clogging up the tiny oil passages in the caps I described.

@mdubk2023 3 жыл бұрын

I have a 2010 f150 5.4 3v at 230xxx miles so far so good no phaser issues yet just axle seals was the biggest bill so far

@lyleswavel320 Жыл бұрын

What oil and weight and filter please

@mdubk2023 Жыл бұрын

5w20 synthetic blend and napa gold filter been nice to me

@Unboxivids 3 жыл бұрын

I can really use your help on this! I have a 2004 Ford F-150 with 155,000 miles on it around 100,000 miles the timing was done on it the full subang with moterctaft parts! At 140,000 my transmission went out, I had it replaced but the transmission shop damaged the transmission lines so all the fluid leaked out 2 days later. They put new lines on it but my motor was running really rough and it was indicative of cam phasers. Took it to the shop and me and the mechanic got into the front end and realized my timing chain has stretched and it broke a guide, we redid the entire timing on it and it’s been driving perfectly until the past few thousand miles, ever since I purchased the truck it’s had a p1000 code and it doesn’t throw a check engine light but that’s not my main problem my problem is I’ll go to work in the morning start up the truck and I see a puff of smoke out the tail pipe for a second and sometimes when I get on the grass smoke will come out, also when I get home and put in in reverse to back up the driveway it starts to run really rough but if I get the rpms above 1500 for a second everything smooths out, it throws a p0022 code and I’m really confused now! What should I look for. It has new camshaft position sensors, new vct things, new spark plugs, and new coil packs! Please help!

@halleffect1 3 жыл бұрын

Fantastic video Brian. I assume those oil holes lined up in the cam bearing? I'd check the torque on the passenger side phaser too.

@FordTechMakuloco 3 жыл бұрын

yup

@Mo-sf7wc 3 жыл бұрын

As always great videos. Couple of years ago I rebuilt a 5.4 3V that I picked up used. That engine was a reman (engine in truck seized). Same as this one they lined honed the head and installed cam bearings. I ordered new thumper cams and to my surprise they did not fit! Long story short I found out the company that rebuilt the motor the first time not only lined honed the head but also ground 10 thousands off the cam itself! Had to get the cams machined to fit! Did you run into this same issue or did you reuse the old cam?

@RobertKohut 3 жыл бұрын

Nice!!

@billyr9840 3 жыл бұрын

Nice !

@ericschultz5413 3 жыл бұрын

Hi, love the videos and much thanks...but, I used your link to the ELM adapter and it goes to OBDlink MX, which was 100 and i bought it. Trying to configure forscan now, and realizing i should have got the 327 hard connector for only about 20 bucks. Now im out 100 bucks and not getting the diagnostics I needed; dang!

@tonysharp4243 3 жыл бұрын

Really really wish there was a mechanic who is as thorough as you around Omaha, NE. I have some type of issue with mine but don’t want to do it myself in fear of messing something up. I’m one who would just do all parts under front cover. Chain to phasers.

@yessigonzalez8187 3 жыл бұрын

Whats wrong with your truck