Using a 1 1/4" hole saw, I drilled right on top of the sticker with colors. Found the sensor was right inside the hole inserted in the aluminum coils. Removed the old one with a pair of needle nose pliars and placed the new sensor in the same location as the old one. Closed the hole in the a/c box using the removed section of plastic from the hole saw, plugged in the sensor and saved myself $2500 bucks :-) Took about 15 minutes!

Thanks so much! I replaced everything in this truck except the evap. Temp sensor. And when I replaced the a/c core I put the evap. Temp sensor back in it and didn't think to replace it. It's tricky to install, I was afraid I would damage the core becauseyou have to push it betweenthe fins on the core. But I'll install it correctly when I have down time. I just won't overuse the a/c. Thanks so much this was a huge help!

you save me lots of money i was going to replace a bunch of parts but 40 part took the dash apart it was not so easy but thanks for the video

Thanks! Works immediately!

Broo you just saved me from burning 🔥 inside this hell cap in Texas heat even unplugging it and plugging it back gets the ac back working 💪🏾 🥶 🧊 ☃️ 🧥 ❄ dude u are awesome 👌

Would it be possible to drill a small hole through the plastic box as close to the evap. And then seal it up to get the best reading...?

firm believer that automotive engineers need to work on what they design. just because it looks good on their part of the paper does not mean it is functional for everyone else.

Couldn't you feasibly drill a new hole in the air handler box and install the sensor and use some RTV sealer to seal it. Would that serve as the same purpose as remounting it on top.

Will this work for a 2018

What is that plug called and where could I got one?

Nice little trick

Would you know if this will help my problem My ac is stuck on cold both sides driver and passenger even when I move my temperature to 70°F it feels like I have it on low

Is this valid for a 2016 , rock auto does not list the part

Where is the cabin airfolter on this thing?

If you don't have a scanner how do you know if its the sensor?

If I ever need to do this I will do exactly this and then drill a small hole on or near the colered sticker on the box, jam it into the evap core And seal the hole.

Thanks!

At 41 seconds, did you say forskin? LOL! Great video, I think I am going to do that to get by!

Could you drill a hole in the box and slide the sensor in and epoxy the hole??

My ac is working pretty good, but I don't see and melted water coming out on the ground, no leaks inside? 2012 f250, any ideas?

100% works... I'm going to make a hole and silicone it in, see if it works for a while.

It looks very practical with that tool. What type of scanner is it?

Sensor that connects compressor under track goes bad. That’s why I wasn’t even get power to compresor when my rig was on.

Wonder if you could drill a hole in the box and install it there. Would it work correctly then?

Si ases eso se cómbela el sistema yo lo ise

Does tis sensor has anything to do with a/c blower not blowing out at full speed? it works at all speeds but do out think it is pushing out full air speed.

Do these questions ever get answered or addressed? Do I need to call for some info? Really need help

How do you test this sensor with out a scan tool?

Can I purchase this evaporator sensor in autozone?

What scann tool you used ?

Mines throwing a P0532 will this work?

I have a 2011 F-350 6.7 I've been through two mechanics plus myself everyone says to do this the same thing you just did so I did it dosent work . I tryed it in ice cubes nothing ! I wrapped it in paper towels and duct tape held it in my fist !!! CRAZY BUT THE AIR IT WILL FREEZE YOU OUT NOW !!! I don't know why !!! I thought I would put it out there !!! 🇺🇲

No freaking way! That sucks

Do you have a part number?

First I gave you a thumbs down because you didnt go all the way and made a hole to put the sensor in a place where it could read... but after finding out that it was going to cost me $1200 plus the parts I decided to buy the sensor since it was only $30 including tax at the ford dealership. Auto Zone, O'Reillys, Napa... they dont carry the sensor. Part number is BC3Z-19C734-A. My AC works fine now. 2015 F450 6.7 so thank you for the video, I think Im going to buy a AC box from a junk yard (is only $100) just to see exactly how and where the sensor goes and where I can make a hole without damaging anything.

Ford's suck it's every truck at work is like this 😬