Big thanks for your video, I recent bought a van identical to yours and it was already lifted, after crawling around under it I think they used the same lift, looks like 1 inch in front and a 2 inch spacer in teh back but it sits level and looks nice, you answered a lot of questions.

The best video on how to install a leveling kit on a ford E350's , thank you so much for taking the time to put up this video

Finally! Someone who knows what they’re doing and I can kinda sorta understand it. 😅😃

this video just saved me a few hundred dollars. THANK YOU !!!!!

Wow, this is perfect for me! Have an '00 E-150 hightop (old & over 200K mi. but in great shape....and yes I have had, but fixed on all eight now, the blown spark plug issue!) purchased that way a coupla years ago as a bare-bones & low-cost mobile office. But now decided we'll turn it into a camper/weekender van for wife & I. Problem is, even w the hightop (which is more stylish but not as super-high as others), my 6'-0" ht. means my head always bent over significantly; a dealbreaker for this use as far as I'm concerned. Have discovered how wheelchair conversion cos. drop the floor on these Econolines (just the width of the side barn doors, between major floorpan supports) about 4" which is the gap they have above frame. But I need to also add these critical 2 more inches for my height; not interested in making it look all "off-road-y", just 2". Great to see how easy AND cheap to do this!! Thank you!

Sweet, ima do mine soon. Thanks for the info and good video.

Love it looks mint

Thanks so much for this. How do these spacers affect handling? I’m looking at doing this so I can fit slightly larger tires in my daily driver econoline but i don’t want to severely affect the ride quality, thx!

Nice think will fit my 09 e350 super duty?

I did exactly as you did on my 2003 e 250 2 inch and I have adjustable caster camber like you do and at allighnment shop they said I needed to have adjustable ball joints . Am I missing something . I replaces ball joints with MOOG HEAVY DUTY ones . Thank you for any help u can provide !!!

Great video. The link for the spacers claims it will not work on econoline vans with twin I beam front end. Have you experienced any problems?

Hey C&Q, I bought this same kit for my ‘03 E450, but Ford uses a M20 bolt so the 3/4 thread Extenders don’t fit as you noted. I’m concerned that the smaller dia. 3/4” stud will wear the knuckle spindle oblong. Thoughts? I’m having trouble finding a longer M20 partial thread bolt at 230mm+.

What size rims and tires do you have?

I have a e150 I'm just going to go ahead and get e250 or E350 springs and pop those in

Hard to find those 8 inch 3/4 grade 8 bolts. My local hardware store had up to 7 inch.

I need to lower my E250. It is about an inch too tall to fit in my garage.

How does it ride with the new 3” lift you put on compared to stock

Good video….I have the 2008 Ford E150 …do you know if this leveling kit works for my van?…thanks

Right on just purchased the kit and need to find those 3/4 8 inch bolts.

Couldn't you buy a longer bolt so you don't need that threaded piece on the end?

Will the 3” work on the front and back?

Would this work for the e350 as well?

Did you get new tires? Just curious on what size you when with.

How is your alignment and front tire wear???

Did you need a camber kit on a 2inch lift or stock set up is fine?

What spare tire carrier did you install?

were did you get spacer

Hey man I'm going to do a video on all the lift options for econolines is it cool I use part of this video I'll give your channel a shoutout

Did you put spacers in the back of the van or just the two front wheels?

Would these work for an e150?

Will this be compatible with 99 e150 ?

this is the wrong way you have nothing holding the track bar to axle it's going to walk back and forth causing wear in track bar bolt hole, second factory bolts are metric thats why nut had play. you needed shorter bolts to make the bolts pull tight on track bar, or buy a more high quality kit that come with everything.