Ford Escape: Front Struts - Rear Shocks & Outer Tie Rods

Рет қаралды 190,117

6 жыл бұрын

Come along with Eric O. at the SMA shop as we swap out (at customers request) some front strut assemblies, rear shocks and both front outer tie rod ends on this Ford Escape and have a little fun along the way! -Enjoy
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
THANKS A MILLION!!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

Пікірлер: 482

@kennethhudson8013 6 жыл бұрын

America needs more damn good mechanics like you, man!

@drfalcon4102 6 жыл бұрын

Kenneth Hudson Amen!!!!!!

@todayintheshopbanksy5904 6 жыл бұрын

Love it when Mrs O gives you grief !

@wyattoneable 6 жыл бұрын

I like it when Vanessa gives you a hard time. It's funny. Nice little extra for the customer with the spare tire.

@stephenlawrence4362 6 жыл бұрын

Love to watch the interaction between Mr and Mrs O

@38911bytefree 6 жыл бұрын

Totally agree, I cant tell who is more funny, love the random interruptions and appearences and shot firing comments

@bbwxqx 6 жыл бұрын

Mr. O, hello from Georgia! I am not a mechanic by any means. However, I am a pretty handy DIYer. Watching your videos has given me the knowledge and confidence to change my own shocks and struts saving me hundreds of dollars! Just wanted to say thank you very much! Your videos are excellent learning tools. I very much appreciate the time and effort you put into them!

@kevinday4474 6 жыл бұрын

Never want to skip ahead on SMA vids or you'll miss gems like "herpes of the automotive world".

@roscoesomeone9764 6 жыл бұрын

The customer will think the new struts fixed the rattle in the back, when it was the loose jack parts all along.

@shaunsautorepairs5410 6 жыл бұрын

i was thinking the same thing lol...

@bburke2647 6 жыл бұрын

Roscoe Someone else v I

@shaneharrison4775 3 жыл бұрын

More true than most folks realise working at a local garage as a kid I had lots of rattling shocks and yes I did check all the trunk junk too 9 of 10 time it was the trunk junk that was rattling

@andrewshanewarkentin 6 жыл бұрын

“Hannah never threw tools at me... she probably wanted to” Hahahaha

@Prosecute-fauci 5 жыл бұрын

I wish all mechanics cared about doing a quality job, and took care of their customers like you. The auto repair industry has a bad reputation for a reason. You are the exception. Thank you Eric

@btrswt35 6 жыл бұрын

Another good little tidbit is to take some grease and smear it on the threads on that rod that holds the spare. I had a co-worker once that had that rod and the screw down rust together and we had a hell of a time trying to get the spare out because neither of us had any tools.

@throttlebottle5906 6 жыл бұрын

I like to blast them with white lithium spray grease :0

@chase7359 4 жыл бұрын

Nice job. My favorite part was when Mrs.O got annoyed. Thanks for the vid.

@lionelmumper7531 6 жыл бұрын

Nice Mix Mechanics, Food, Family & Dogs. Buy Mrs. O some Night Vision Goggles for her dark kitchen. Safety First.

@denniswilkinson1118 6 жыл бұрын

Your attention to detail is what keeps your customers coming back. Well done great video!!

@stapleboss 6 жыл бұрын

I just put a set of those pre-made strut/spring units on my wife's car. Easy peasy and cheap. My mechanic friends said he prefers them to me asking him to swap springs at his garage on his fancy low death rate spring machine.

@russellmartin2705 5 жыл бұрын

Couple of things...brake cleaner works on crickets and drunk binge lasts from Friday afternoon to Sunday evening. It's ok to go to church just keep quiet.

@Zib187 6 жыл бұрын

FINALLY! I got my brake clean fix. The methadone clinic couldn't help me with my brake clean withdraws & Obamacare doesn't cover it.

@michaelmerta8956 4 жыл бұрын

I am having a good time watching you and your family in your shop. I am 70 years young and always learn more at your ways,of approach to tackle a job. Keep up the good work. Michael

@klwthe3rd 6 жыл бұрын

It always makes me feel good when I see Eric O. Go the extra mile and fill the spare and reorganizate the trunk. Few people realize that your spare will lose 1 psi a month naturally. So if the spare has not been checked for 3 to 4 years, its basically worthless when you need it. In the video it was 8 psi so my point was made. Great seeing Sheba and Chloe too. Beautiful dogs.

@SouthMainAuto 6 жыл бұрын

Thanks Kenneth! Oh and thanks for the taffy! Much appreciated :D

@klwthe3rd 6 жыл бұрын

South Main Auto Repair Youre welcome. I know its not something g kewl like power tools but I was thinking about enjoyment for the whole family. Hope your day was really great!

@franknewling1139 5 жыл бұрын

@@klwthe3rd Eric's reply: "The WHOLE family❓"

@bertgrau9246 4 жыл бұрын

I drive trucks for a living, and I stopped to help a lady in the Dallas Texas area that was sitting on the side of the road. Her spare was flat too. She said, another gentleman stopped but realized the spare was flat. I said, ma'am no problem. I carry an air hose with me and I hooked it up aired up her spare, changed them for her. She wanted to give me $100 ! I said, no ma'am. I'm just glad I could help. Besides, God gave me an opportunity to help. So I did. She was around 70 years old, she did give me a hug. (That was better than any money )

@mschmitz57 6 жыл бұрын

It's always good to see the "Lovely Mrs. O"

@bradnoyes7955 6 жыл бұрын

"Don't eat the raisins." Words to live by

@throttlebottle5906 6 жыл бұрын

you mean the "rabbit raisins" :))

@ZeusHands 6 жыл бұрын

Old classic SMA, with the IR impact and the pimp juice sprayer 👍

@BreadAndGatorade 6 жыл бұрын

I bet that spare was rattling and he thought the struts were bad lol 😂

@squirrelkilla7371 6 жыл бұрын

I got the classic "reach under" at the doctors office not long ago. Was odd. It was the dentist. 😣

@JohnRodriguesPhotographer 4 жыл бұрын

Lol!

@WhalerGA 3 жыл бұрын

Sounds like a Rodney Dangerfield line !!

@tomd5010 6 жыл бұрын

Today I learned that for precision, the air impact factory torque setting for installation of the strut tower nuts is exactly the same setting for removal. Brrrrt!

@willemstreutgers1154 6 жыл бұрын

Nice to fill the spare, tell the client, he will remeber you when he get a flat. And as always a good exp. will be told to 5 friends a bad one to 15.

@Mr92cadi 6 жыл бұрын

I kept screaming, the oil! Don't forget to put his oil back

@mikeb7887 6 жыл бұрын

Pretty dang cool. Here I am thousands of miles away on a business trip overseas and still get to watch Eric O videos at 3 am. Total cure for jet lag and time changes! Thanks Eric. Very much appreciate all you put into making these great videos. I am a decent car, boat, and landsacape mechanic, (no where near your experience), but watch every video just for the sheer enjoyment. Still learn something every session. You should be teaching full time someplace probably like NASA. As one NY'er to another, awesome.... Mike B

@charlesmiller5078 6 жыл бұрын

I wish that brake fluid cleaner would have a adjustable spray pattern. Its used for so many different things, rarely cleaning brakes.

@haroldlm64 6 жыл бұрын

YES, a threefer on the brake clean. Well done, sir.

@hectorjones5989 3 жыл бұрын

It’s nice to see a really good old school mechanic. I worked in my uncles shop as a kid. I learned a few things watching and eventually working with the mechanics. Anyway, it’s good to see a mechanic who cares about doing the job right. And, Mr. O is a good example of a good example. Keep up the good work. And thank you for putting out good work and quality videos. Have a great day and stay safe...

@63256325N 5 жыл бұрын

Nicely done, the placement of the jack and components was a nice touch. I'm sure it all rattled around in there like crazy the way it was. Thanks for the video.

@coryh8888 6 жыл бұрын

my mom said why cant you be more like eric o! said sorry now im ashamed....

@tkwalters1121 6 жыл бұрын

I just wanted to say your videos are easy to follow and understand, some I've watched by others are very confusing. I appreciate the work you put in

@electroevolution5777 3 жыл бұрын

Your relationship is so wholesome. I genuinely love this channel

@dalltex 6 жыл бұрын

Two Ughadugas equals only 3 foot pounds or 24 inch pounds but a surprisingly limited amount of the beans. Nice video once again Mr O.

@donerickson1954 6 жыл бұрын

Mrs. O cracks me up.

@dmayse1000 6 жыл бұрын

U know one of ur younger fans goes out to his or her dads shop, finds the brake parts cleaner bottle and does the signature brake cleaner bottle thrust just to hear that sound. But it never happens for them lol

@joeshmoe8912 6 жыл бұрын

Eric you sir are a great business man. Going the extra mile for your customers. Even if you did happen to put bad air in the tire at least you put it there. LOL. Thanks for sharing.

@comingundone27 6 жыл бұрын

Thank you for the "Free the nut up for the guy doing the alignment" Its very much appreciated.

@jamesrichardson771 8 ай бұрын

Very Nice💥 I'm gonna do my wifes "front" struts on her 2010 Escape -- they came in the mail" yesterday -- looks like it's gonna be a breeze ! 🛠 thanks very" much, for sharing your Skills, and valuable experience with all of us who "Really" appreciate it !!

@Thermool 6 жыл бұрын

Looks like normal junk in that trunk. I've heard all sorts of interesting finds in trunks from guns, underware, kids toys, adult toys, dead animals.

@2-old-Forthischet 6 жыл бұрын

My son is an environmental chemist so I use Simple Green. Believe me, I have had some lectures before.

@brianrobertson1211 4 жыл бұрын

I have a problematic Mazda Tribute, and your videos have saved my bacon numerous times.

@TheCowgirlNiamh 6 жыл бұрын

So happy to see brake clean again!! My OCD missed it!! 😂

@robertkutz 6 жыл бұрын

nice work .

@andykidwell6187 6 жыл бұрын

It's amazing the extra effort and attention to detail you put in Dr. O. There are some unscrupulous shops out there that might chuckle at the mess in the spare tire compartment and maybe even contribute an empty cigarette box depending on the techs mood.

@jamesh6229 6 жыл бұрын

Thanks for taking us along Eric, love the nuts and bolts suspension videos. It seems like they take care of their vehicle fairly well.

@DougHinVA 3 жыл бұрын

For most guys, they will never see a mechanic do this stuff let alone explain it ! So this is real VALUE to regular guys when they have work to be done. To be able to tell the mechanic what you think is wrong and where puts you MUCH higher in their esteem that an ignorant customer ! I hired an experienced 'mobile mechanic' to install 4 struts in my 1999 Corolla (after 20 years!) and watched him do it. Money well-spent and that is a hateful and hard job to do!

@NickMyers1 6 жыл бұрын

Mrs. O - "I thought you said this job would only take you 20 mi..." and cut the video 😁 Nice work as usual Eric. Love the compilation of bolts - had that on a Taurus once.

@joshwinky6005 6 жыл бұрын

YES! The great brake clean outage has ended!!!!

@NathanVogt 6 жыл бұрын

I thought some BS EPA thing happened and he couldn't use it anymore. Good to see you douche it all down again.

@fido139 5 жыл бұрын

One thing about Escapes and Mariners as a long time owner of both, if you ever hear the squawky noise from in back while the body flex's as you drive, it's the rear hatch door latch every time, after looking everywhere else FIRST! LOL! These are good cars, there are 4 of them in my immediate family.

@chkr1610 6 жыл бұрын

Back in the day when I worked at a shop, we used to used those refillable spray cans for brake clean. We would have brake clean by the drum with a pump. Certainly made it easy. Keep up the great work!

@throttlebottle5906 6 жыл бұрын

as much as he uses, he should get 55 gallon drums and have it on a hose ;)

@scottouellette8458 6 жыл бұрын

The easiest way I found to measure distance + length in tie rod is to measure from end of boot ( I put the tape measure right up against the boot and touching the tie rod) to grease fitting if no grease fitting present find the center of the top of tie rod end then put a dot with a sharpie. I do this because I have found variances in length of tie rod end bodies from brand to brand so counting threads may put you way off

@scottouellette8458 6 жыл бұрын

Random One the center of the ball in the joint is the axis so it's the best true measurement. I've scene some measure from the end of the boot to the end of the tie rod end ....but again the body of the different brands may vary but the grease fitting or the center where it would go is constant

@jamescucuro9125 3 жыл бұрын

You know, I’m 77, your young, you are a special person ,who is very blessed, I think you know it, a beautiful family , great wife, a wonderful busniss in a little town setting, all the business

@jamescucuro9125 3 жыл бұрын

You won’t ,and on top of that the greatest teacher I ever had, going to collage can’t compare to OJT. for you yuppies, that on the job training,,I PERSONALLY THANK YOU SO MUCH. JIMMY Cucuro, Macomb Michigan.

@CVD-di1xn 6 жыл бұрын

I still say, you live a charmed life. I really enjoy your videos. Keep up the good work.

@Rarz1310 6 жыл бұрын

Don't know if you read the comments, but thank you for making the videos.

@roadkill5333 6 жыл бұрын

You know you're in trouble when: My dog like to get under the bed covers!! When I'm there, I raise them for her. When I'm not there, she tries to bulldoze her way under, and generally pushes the covers off of the foot of the bed!! Last night, as I was rearranging the bed covers, where she made an unholy mess of them, I yelled at her that it looked like she took BIG NASTY to my bed!! That's ok, though! A lil bit of brake clean, and they were good to go!

@bradburkhalter4082 Жыл бұрын

Actually, your videos are great! It’s great to see someone with great moral values do the work you do and it be a family affair as well. It’s really awesome that you have such great support staff in your business.

@daleyurk4369 6 жыл бұрын

Eric, great video. Always enjoy the mechanical hands on stuff!

@williamkraft5574 4 жыл бұрын

Always a pleasure having Mrs. O make an appearance !!!

@JorgeRodriguez-po7kx 4 жыл бұрын

Best Mechanic on KZfaq Hands Down

@JohnRodriguesPhotographer 4 жыл бұрын

To Eric O, this video was as you might say a little bit routine but, you make it entertaining, the surprise visit by the missus added to the fun. I'm watching all the way through. Even routine there are moments to learn something. Like your measurements for doing the tie rod end. I had thought if I ever did one of those I would put a mark on the rod that the tie rod goes on to. This makes more sense. So even routine has an opportunity to learn and teach. Another great video

@mikeholt3545 6 жыл бұрын

Thanks Eric good to have regular sma videos in the morning

@ironeagle2526 6 жыл бұрын

why thumbs down this is a very good video he covered all the bases on the job some ppl just like being negative nice job Eric O

@rmiller6483 6 жыл бұрын

Eric, do most of your customers know that you have one of the most popular mechanic channels on the ole you tube. I'm surprised you don't have a camera recording while you work on all your customers cars all the time lol... Just shows how honest and what a damn great mechanic you are. Keep up the great 👍 videos and thanks for sharing all your knowledge with us. Have a great and safe weekend sir..

@paulcochran1721 6 жыл бұрын

Babysit? You mean be a father? CORRECT answer! Good job!

@dragonheart5316 6 жыл бұрын

I remember this overheated gem. Time for some cereal and SMA.

@allcureman3403 6 жыл бұрын

I love the nuts and bolts videos. Great job Eric!

@kevinwoodcock7578 6 жыл бұрын

Ahh how lucky Mr.O is.. A wife with beauty, brains and she loves to break balls too. A wife that loves to laugh... A pure 10 on the ugga dugga scale. Thanks for all you 2 do.

@richardbambenek2601 5 жыл бұрын

So jealous of your relationship with your wife. My wife was tragically born with no sense of humor and I love to laugh and joke around.

@wonniewarrior 5 жыл бұрын

How do you tell your wife has a sense of humour ? She gets married.

@seeya205 4 жыл бұрын

@@richardbambenek2601 Same!

@KC-vp7wn 5 жыл бұрын

147k miles on my 02 escape gonna tackle struts and outer tierods plus read shocks. car jumps around with bumpy road, shocks are not doing much! Thanks for the video , this lowers my stress level! Lol

@bobmoy3406 6 жыл бұрын

Happy belated Birthday Eric.

@gregsmith7788 6 жыл бұрын

Sorry for that last comment. Helps when one watches the entire video before casting stones. I would never have made you out to have been a thief based off of all your work I have watched here at South Main Auto Repair. Keep up the great work and videos.

@mechanicmajid Жыл бұрын

Good job my friend

@chrisuk1287 6 жыл бұрын

Nice video Eric, you make everything look so easy :) Thanks.

@snakeskinproductions7500 6 жыл бұрын

straight forward stuff but always a gas to watch. And a big Hello to Capt. Brakeclean...lol. Thanks again Mr. O...

@snakeskinproductions7500 6 жыл бұрын

P.S. I now find myself actually counting "Uga-Duga's" So there's that...

@ogbobbye 6 жыл бұрын

you stole that guys oil??? I almost said lol, good job I like the simple job because of all the commentary along the way tons of useful stuff you point out that is easy to overlook doing it in the driveway.

@troyknowles2211 6 жыл бұрын

Excellent video as always Eric O!!!!!!

@baxrok2. 6 жыл бұрын

Honestly, I just wanted to see you get those end links off! Seems like the same wizardry that you use on caliper bleeders cuz those things never come off that easy! Lol Thanks Dr. O!

@ianwindley1555 6 жыл бұрын

great video as always Mr.O

@taylorjennings8220 6 жыл бұрын

that whisker is driving med crazy

@ericcorse 6 жыл бұрын

Well done I saw the same test about homemade panther pee must be true. Mrs. O was on fire today.

@angryfrigginliberalinpenns1314 5 жыл бұрын

You and your wife are the coolest people I have seen. So great you guys have such a great relationship. behind every good man is a GREAT WOMAN!!!

@raymilligan9556 6 жыл бұрын

brakes , struts, tie rods and Ham, OH YA!

@johnferguson7235 6 жыл бұрын

Pack grease into the little Allen key (hex key) hole on the sway bar link so that it doesn't fill up with rust. It is often better to invest the money in a new set of tires instead of replacing slightly worn struts. Nice video, thanks for posting.

@stevenmarsh7138 6 жыл бұрын

Can you do a video on your State Inspections? Would be interesting to see what is involved and compared to UK MOT Thanks

@SorryIwasntListening 6 жыл бұрын

agreed....I am also in UK and MOT strikes fear into the soul of every 5+year old car owner (never owned a car newer!)

@supervitz7178 6 жыл бұрын

As a Brit, I would love to see this too. I own mostly older cars but I don't worry about MOT. It's easy to pass if the car is well maintained.

@TheCowgirlNiamh 6 жыл бұрын

Would be interested in this too! I'm in Ireland and we have the NCT. I never worry too much as my cars are well maintained and never have a problem passing.

@CKilger12 6 жыл бұрын

I bet UK is way more involved than NY...NY sucks but its not horrible...but it would be a good video

@OneAuto 6 жыл бұрын

Good question Steven.. Yes please Eric

@HUBBABUBBADOOPYDOOP 6 жыл бұрын

It's not every man- who is comfortable enough to ask his Wife to hold a *big black shock* for him. It's very nice to see more and more KZfaq Mechanics using that penetrating fluid recipe; it's cheap, economical, and effective. I've been using it for nearly 40 years, with awesome results.

@kenjohnson3479 3 жыл бұрын

Hey Eric. I'm retired and just beginning to learn auto mechanics the hard way: I got took on a 2011 Tribute that I paid 4K for. I'm now in the process of doing 4K in repairs on it, though I understand I'll never get my money out of the beast. I wish I could say it's been fun. Currently replacing the front struts using your video.. I've already done the front brakes using your video. Thanks so much for the great videos. IMHO your videos are the most useful.

@ojjenkins7110 6 жыл бұрын

YEAH I THINK A STATE INSPECTION VIDEO WOULD BE FUN TO WATCH. LOOKING AT THE HAM MRS O FIXED FOR YOU, DO YOU HAVE TAYLOR HAM DINNERS OR SANDWICHES NOW AND THEN? I LIKE A FRIED TAYLOR HAM SANDWICH. HI TO MRS O AND THE DOGS. I ALSO HOPE YOU GET THAT 36 CHEVY BACK IN FOR MORE WORK, DO A VIDEO ON IT AGAIN. I'VE WATCHED THAT ONE 5 OR 6 TIMES ALREADY :-)

@darcydesmit3774 6 жыл бұрын

Eric, Mrs.O needs a light to cook those awesome meals for you!! love the video!!!

@backyardbasher 6 жыл бұрын

My life would be complete, if I had an SMA Ugger Dugger T-shirt Hurry up & take my money.

@seoprofitspro8025 6 жыл бұрын

Or the good old "There's your problem lady, you have been playing with another mans nuts" Or "It's all nuts and Bolt's, till someone gets shafted" lol or even the good old "son Of a whoha! " " Look out little fella " "Don't be that guy"

@JVerschueren 6 жыл бұрын

'Give it the beans' on the front and 'Two ugga dugga's' on the back, that would be a good one.

@79mheidb 6 жыл бұрын

Give it the classic reach around, SMA style

@gerryrig5012 5 жыл бұрын

Nice Touch To Reinstall The Tire & Jack. Going The Extra Mile To Check Tire Pressure...

@rrmech11 6 жыл бұрын

Excellent video. Great product

@luisdeleon2703 6 жыл бұрын

I like the ugga dugga torque specs

@haywardsautomotive6156 6 жыл бұрын

Now that was nice watching an SMA video seeing my shirt and I'm watching it wearing my SMA shirt. My brother was watching it with me and laughed. I brought my SMA t-shirt to NY with me hoping to visit but now the funeral for my aunt was earlier & my uncle's is Friday afternoon and family get together is Saturday and I leave Sunday. I am renting a cabin next year near Great Sacandaga for a week or two so I'll swing by then. Great video as usual with a nice twist!!

@SouthMainAuto 6 жыл бұрын

Haha I thought you may have saw that shirt I was wearing with NO DAMN POCKET! Lol any how sorry to hear about your family :'( . I am sure we will meet up some time. Take care.

@haywardsautomotive6156 6 жыл бұрын

My new ones will have pockets & I'll send you one. When you said a shirt without pockets is a rag I figured it was long gone.

@Mr59ZIPPO 4 жыл бұрын

I just knew you were gonna pinch the man's oil. lol. keep up the great work.

@shaneharrison4775 3 жыл бұрын

You and Mrs.O haveing a fun little hammer toss

@Micko350 6 жыл бұрын

Eric from what I've seen in my 30 odd years of working on cars they're mostly always 'double nutted' unless they have the newer style 'nyloc' type nuts. Who knows things maybe different over the ditch where you are?!

@kenskip1 6 жыл бұрын

Fabulous 50'S,How about sensational 60'S? Whats an "ugga dugga? You and Mrs O remind me of "Ralph and Alice Cramden" "The Honeymooners" for the sower members of the group.Eric you have a great sense of humor.Good to see you using tools instead of computers.Thanks for sharing, Ken

@davidkaminski615 6 жыл бұрын

An Ugga Dugga is a torquing unit of measurement named by the great German mechanic Jes Gudnteigt. It's supposed to be a trade secret!

@kenskip1 6 жыл бұрын

Is the "Ugga Dugga, measurement in centimeters,kilometers,inch pounds, foot pounds,Newton Meters, PSI? How many Ugga Dugga's are required to tighten a tire on a 2007 F150?

@davidkaminski615 6 жыл бұрын

A good rule to go by is how many letters in the name of the vehicle. If it's a GMC, it's three ugga duggas. If it's a Ford, four. Dodge, five. Chevrolet...well...I can't count that high.

@SouthMainAuto 6 жыл бұрын

Big secret huh!? And then there is a guy named Dave just giving it all away like it is public knowledge... thanks Dave, thanks a lot...