Ford Flex With A Bad Flex!?

No video

Ford Flex With A Bad Flex!?

Рет қаралды 124,894

Жыл бұрын

I am getting exhausted with the flex puns on this one but it's time to flex some creativity and save this lady some money on replacing the front pipe. At any rate come along as I swap out a broken flex pipe on a 2019 Ford Flex.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 818

@ronaldclark1178 Жыл бұрын

Eric, I have been welding exhaust pipes for over 50 years and have seen several PROFESSIONAL WELDERS that couldn't weld exhaust pipes. If it holds and doesn't leak, it's good. Great job as usual!!

@sawtooth4615 Жыл бұрын

When I got my first car in the early 60s, it was a six cylinder. So of course I had to have the manifold split so it sounded better. From there I welded the second pipe from the manifold on out. Dad had a stick welder but I brazed everything and yes, there were many cracks and broken welds. But that's what made it fun............... lol

@Boodieman72 Жыл бұрын

To be fair, pipe welding is a specialized skill.

@jormalonnberg1578 Жыл бұрын

@@Boodieman72 Yeah, if you weld highpressure pipes, gas or liquid, but exhaust no, if you get it not leaking and not looking as porcupine it is ok on old exhaust pipe.

@kenj.8897 Жыл бұрын

That sawzall blade has 48 more cuts in it

@molokoplus3 Жыл бұрын

How about the slag down your shirt? You just laid some knowledge brother.

@freetolook3727 Жыл бұрын

For being a self described rank amateur, that weld job looked pretty professional to me! 😂😂

@shadetreemech290 Жыл бұрын

Yeah, me too.

@jimskinner2777 Жыл бұрын

I think he is just a modest person. He is so talented and very very smart. I love watching him diagnose electrical systems he is so methodical, but he will tell you he is no professional.

@ohioyodertoter6827 Жыл бұрын

Such a Chevy hater 🙉🙈😡

@BarkingDog-ho6el Жыл бұрын

If you are getting paid for it and it works, that makes you a professional in my book too.

@shawn_530 Жыл бұрын

Thanks to the SMA channel I now find myself shouting “CHEVY THUNDER!” whenever a particularly loud vehicle passes by…

@missulu Жыл бұрын

Back before I was a welder, and I was an exhaustologist, specializing in rust growth, the one thing I would do differently is just have you do it!lol!

@jefferp Жыл бұрын

My professional opinion is Eric O is an expert at MIG welding old heat cycled rusty metal to new metal. Good job!

@parochial2356 Жыл бұрын

I wouldn't be surprised if Eric has a side hustle inspecting and certifying welds at nuclear power plants, just too humble to admit it.

@jamram9924 Жыл бұрын

@@parochial2356 He did with Nasa and their Space Shuttle program. He was forced to retire after the fleet was retired.

@parochial2356 Жыл бұрын

@@jamram9924 Yeah, that's when he sent a job application to the U.S. Nuclear Regulatory Commission.

@splice247 Жыл бұрын

I've been a local 196 pipe fitter for 187 years, and self proclaimed exhaust expert of the year 10 years running, what a hack

@PhillyDee215 Жыл бұрын

I remember the episode when Eric 1st showed us that welder.....one of thee best welders at the time and still is

@truthsmiles Жыл бұрын

What is it? A flux core?

@Jazzyj69 Жыл бұрын

Your welding machine was set very close. (Voltage and amperage) Just hearing how your machine was running tells most of the story (being a welder myself). Looks like you did a great job with the exhaust pipe. I wish I had a garage with a lift in it 😢. But keep up the great work you do and keep the videos coming. Stay safe (you and your family) 🙏

@agostinodibella9939 Жыл бұрын

Nice job Eric! I always enjoy videos like this where you can save the customer money and get a little more life out of these vehicles.

@parochial2356 Жыл бұрын

Yes, and make a small, reasonable profit. A win-win situation.

@denniswelch6005 Жыл бұрын

Let me say this about good small family owned repair shops. I had a similar issue and chain muffler shops say”Cat back” every time.$1000-$1300 I took it to a small shop. In and out in 2 hours with a piece of pipe welded in and $120.00 cost Thanks SMA and all the shops like you.

@barrygordon5223 Жыл бұрын

Great repair job Eric! Nice for your neighborhood to know that they have an honest garage owner that will take the initiative to save them some money and not take them to the cleaners. Awesome! 👍😁

@glennbarker222 Жыл бұрын

Those welds weren't too shabby in the end. And they didn't seem to be leaking, so all is good and you saved the customer a bit of cash. Nice job.

@deziking Жыл бұрын

it was actually pretty impressive. Good shit .

@dailydriver8280 Жыл бұрын

Another sighting of that rare, seldom-seen breed. An honest mechanic that does stellar work. Great work, Mr.O. Already looking forward to the next one.

@davidshellhaas1730 Жыл бұрын

Love all your disclaimers on the welding and it is such a shame you have to. Thanks for another great video Eric

@shadetreemech290 Жыл бұрын

Ditto!

@Blasterxp Жыл бұрын

I think, no need

@MazichMusic Жыл бұрын

Viewers on YT tend to be critical of the content creators.

@vg3430 Жыл бұрын

He doesn’t have to…he does it because he knows it will actually increase comments (just like the ones you a I made) which in turn generates revenue.

@williamsanders6092 Жыл бұрын

Eric you amaze me with the knowledge and skill you apply in repairing existing parts. Your skill is unmatched in automotive repair.

@greggc8088 Жыл бұрын

I'm sure your customers appreciate your ability to do just about any job they have need of. Good work!

@bombardier3qtrlbpsi Жыл бұрын

My professional opinion for SMA is. You saved the customer some (alot) money!

@paulaconnaghan1626 Жыл бұрын

Having grow up in Midwest and being a mechanic I don’t miss the rust . Moved to west coast in 1976 and the couldn’t believe how long vehicles live rust free. Great vids and long live the automotive repair professionals.

@whoak302 Жыл бұрын

You're welding disclaimer had me rolling 😂

@shadetreemech290 Жыл бұрын

Yeah, you could just see where he was coming from.

@mitchmerle5774 Жыл бұрын

After watching this channel for a year I am fully convinced this guy can do it all. These videos have to contribute to a nice increase in business for him. It’s well deserved. Thanks Eric and Mrs O.

@warplanes Жыл бұрын

As long as its sealed and holds together for the useful life of the exhaust, that's the level of weld we're aiming for. 😊

@DirectCurrent4u Жыл бұрын

That weld was much better the the weld that my local (Route 66 Muffler) did on my Cat Back exhaust system on my Cummins! Keep up the great work Eric and don't let anybody tell you you're not a good welder!🙏🏻👍

@jonbingham3595 Жыл бұрын

I LOVE YOU BROTHER. I USUALLY DON'T COMMENT I JUST ENJOY YOU'RE VIDEOS. I'M AN OLD MECHANIC TRYING TO KEEP UP TO WORK ON MY OWN VEHICLE. THINGS CHANCGE SO FAST AND I'VE BEEN OUT OF THE INDUSTRY FOR 20 YEARS BECAUSE I'M DISABLED AND CAN NOLONGER DO WHAT I LOVE. I WAS IN MY TIME 1BOF THE BEST DIAGNOSIS TECH. HOW TIME FLIES. JUST YESTERDAY I WAS 16, NOW I'M PUSHING 60! CRAZY. GOD BLESS YOU MY BROTHER AND THANK YOU FOR WHAT YOU DO FOR US.

@dustcommander100 Жыл бұрын

That MIG welder sounded like it was set up exactly perfect. From what I could see of the welds, they were beautiful. I would have trouble being humble if I could do what you do, but I see that I need to remain humble. Very humble.

@4englishlies875 Жыл бұрын

As a non professional welder myself( no experience) I think you did a heck of a job.😊

@shanehaskins8347 Жыл бұрын

Eric I retired after 40 years of being a welder in the welding trade. Everything from CWB to Tssa certification.(Canada) Trust me, with your minimum trade knowledge you are better than most trade welders. Don't worry about the arm chair quarterbacks, no explanation necessary.

@ladamurni Жыл бұрын

If I could weld only half as good as you just did, I would be very happy!

@dmakk861 Жыл бұрын

In a few years up in the rust belt, ma'am all we could salvage from the exhaust is the flex pipe beautifully welded.

@boblynch7348 Жыл бұрын

I applaud a man who knows how to set his mig machine for a proper "short arc" weld.

@anthonysimonhough9691 Жыл бұрын

Well done , you saved the woman heaps of money by being a good service person , keep up the great work . Thanks for the movie.

@MichaelSmith-dg1fb Жыл бұрын

It's better to be good at everything, than great at one thing. And you seem to be good at what you do. Honest mechanic and you help people who know nothing about what they drive. People don't buy cars because they know how to fix them. If I lived up there near you, the dealer would only see my taillights as I drove off. Never to touch my car again. You are a rare breed .

@palladini9718 Жыл бұрын

We once had Ford Escape that needed the flex pipe replaced, so go to Speedy Muffler, and they told they do not do that, but they did tell us about a place who does. So we go there, and it is an Industrial strip mall, he takes our car in, we wait outside (it was summertime), and 30 minutes later we had the vehicle back, fixed!

@nonyabiz2777 Жыл бұрын

Nice work. I’m sure we have all see the professionals at the local muffler shop do really horrible work. Bravo sir.

@nonyabiz2777 Жыл бұрын

@Pete N same here. I just have my boys weld anything I need now. Hope they got it right the second time.

@jafo461 Жыл бұрын

Anyone that’s ever sawzall’d with a long blade knows you were working sharper end. I love that pipe expander. You have all the cool tools. Cheers.

@jamesbruno5896 Жыл бұрын

Great welding excellent repair!

@randybeard6040 Жыл бұрын

Seeing Eric Weld the Exhaust Pipe Brings me Back to the Old Days when we used a Coat Hanger and a Torch to Braze Exhaust Pipe Conn. Together--it would still work but the New Coat Hangers generally have to much anti-rust coatings on them...

@80SWoods Жыл бұрын

I have to say, it’s nice to see a mechanic still using old school pneumatic tools when so many have switched to electric.

@raynetorrin Жыл бұрын

WHAT???? I CANT HEAR YOU! DID YOU SAY SOMETHING?

@80SWoods Жыл бұрын

@@raynetorrin HAHAHA!!

@SouthMainAuto Жыл бұрын

Yeah all these other guys in their big clickity clacky battery tools. Granted I have several but you just can't beat air at the end of the day 👍

@aldonco Жыл бұрын

I still prefer air tools over electric. I don't want to be a slave to batteries.

@richardluce775 Жыл бұрын

That extra double tap on trigger when your done is almost well………..

@irvinmyers5731 10 ай бұрын

I’ve been welding high pressure pipe and welding platforms offshore in the Gulf of Mexico and I think you’re a very good welder so don’t knock your skills. You’re the man

@Treeves30 Жыл бұрын

As Derek at VGG says, "If it works, is it wrong?". Fantastic fix/solution to save the lady from what the stealership or muffler place would have cost since they would just have hung some new parts on the car.

@funnypranker34 Жыл бұрын

Welds look beautiful Eric. Also I’m quite shocked that a 4 year old vehicle already needs exhaust work. My 1990 bmw’s exhaust only had just a couple holes in it after 30 years. It’s been fixed now but even the original flex pipes are still holding up. They leak a bit but it’s still quiet and that car was in Chicago all it’s life.

@FishFind3000 Жыл бұрын

Funny enough my f150 with the 3.5 ecoboost broke is flex pipe2 days ago. The fix from ford is replace the flex and muffler as it’s one whole piece. But it’s in back order… so $60 from autozone for a new one and a coupler and I’m back in business.

@miketeeveedub5779 Жыл бұрын

If it wasn't for "bird turds" or "Booger welds" I'd have no welds at all. I gotta stop using flux core MIG wire and buy some damn CO2/Argon tanks already - those welds were beautiful! Cheers Mr. O!

@even7steven Жыл бұрын

If your saw blade is dull, just use the backside of it to finish your cut. Lol

@ryanwaltos2206 Жыл бұрын

Had the exhaust rot in the split in my old Subaru Outbacks. Dropped the whole pipe systems from the front junctions, did a complete weld and fill. I put a flat top piece of heavy metal on the top of the Wye to keep salt belt rust maker water from collecting there and rotting again. Held for a few years until i sold the car.

@williamwood6531 Жыл бұрын

You did a good job and very reasonable for your customer! Well done Eric O!

@johnpenwell6402 Жыл бұрын

“It’s already broke we can’t make it any worse… well technically we could let’s be honest” exactly why any DIY repair I’ve done I considered a success if the car works no worse than when I started.

@robhunter2435 Жыл бұрын

Nice welding job! Looks very professional

@derekfriday7931 Жыл бұрын

"I should see if I have a blade any duller than this one" 😂 I was not ready for that this early in the morning

@RideAcrossTheRiver Жыл бұрын

For those who have an older Ford with V-engine, check those bolts at the forward manifold where it connects to the Y-pipe. Those bolts-nuts are exposed to road crud and can rot out to cause a disconnection.

@mariosaccoccio1688 Жыл бұрын

"We're not taking this to the moon!" The expression in carpentry is similar. "We're not building a bridge!"

@archibaldgeorge8916 Жыл бұрын

you weld better than some the guys who worked with me over the years

@craigstubbs1991 Жыл бұрын

"I am not a welder'" Bull. You did a great job. Have you seen Rainman Ray use a welder or a torch? Now, HE scares me.

@williamschmitz971 Жыл бұрын

Wish we had a mechanic near us that is genuinely good towards their customers! Ours are all about upselling!

@colin4850 Жыл бұрын

Nothing wrong with that welding Mr O , you can weld my pipes up anytime 👍👍👍

@jeffsimonar7161 Жыл бұрын

I am a professional welder, and it looks great from my chair. Good job, Eric.👍🏼

@Radar8717 Жыл бұрын

Many times when the shop was poor I’ve used thick metal coat hangers as brazing rods and done clean work.

@ohdeerme Жыл бұрын

Eric - Professional job again. In the future use this "Disclaimer" - I'm not a professional welder but I do play one on KZfaq. - As per the welder's comment & mine you now are KZfaq certified by us both !!!

@leopage2728 Жыл бұрын

After 40+ years of welding, starting out with stick Welders and ending up running laser welders. I say you did a fine job there buddy. Enjoy your videos.

@htownblue11 Жыл бұрын

Eric O….American hero, entertainer, electric glue artist….amongst other labels on his extensive resume. Hope his town makes a statue in the town square of him, bought and paid for by Napa of course.

@robstar293 Жыл бұрын

Love the disclaimer on welding, not going to the moon etc. Thanks for giving me a good laugh.

@dougjones9493 Жыл бұрын

Eric, my time we used a stick welder and had to bend the rod to weld on top

@sidvis7235 Жыл бұрын

You may not be a 'professional' welder, Eric, but that's some of the best pipe welds I've seen! 😊

@bigsparky8888 Жыл бұрын

WELDING...YOU ARE A MASTER TECH...MULTI FACETED!!!!

@kens.3729 Жыл бұрын

NO Job is Too Difficult for Eric at South Main Auto. 👍🙏

@mikeberry304 Жыл бұрын

Nice one Eric , you just saved your customer a load of money and done another great repair , well done

@jayjudd6518 Жыл бұрын

Mr.’O’ thanks I can’t see anything but spots I didn’t have my beer goggles on. Ha!

@danielluber209 Жыл бұрын

Fantastic Job!! Thank you for doing it your way and not speeding up the camera. I LOVE watching you weld and when cutting stuff off..

@hamishr2367 Жыл бұрын

Awesome that you actually try to save the customer some expense....very nicely done

@raymondstucker1609 Жыл бұрын

Eric u had that machine set up perfect. I always listen to the sound when welding. Thanks for sharing

@trekOCLVone Жыл бұрын

I like your low tech repairs - no wild parts cannon action ! Good job sir !

@davidzelkowski9948 Жыл бұрын

I would say that was an excellent application of the hot metal glue gun. Well done Eric!!!

@vanceblosser2155 Жыл бұрын

I have a 1999 Chevy Tahoe that I bought used in 2011. About 6 months later a brake line ruptured and I took it to the dealer for replacement. Part of their service is they inspect the vehicle for other issues, and there was a flag on the exhaust system warning that it was going to fail soon. It was still tight and a visual inspection didn't reveal any corrosion so I basically filed the comment. Now it's 2023 and that exhaust is still on there, no leaks. Part of that is we don't have as much snow in Virginia as you do but it's been our winter vehicle since it was purchased so it has been exposed to some salt in the winter. Now if they had only done as good of a job on the bumpers.....

@vic745 Жыл бұрын

Looks awesome way better than some repairs I've seen

@turbobus6731 Жыл бұрын

Your welding looked fine and the arc sounded perfect, my reply to the “pros”,,,,, “didn’t say my welds were good lookin’, said I was a good lookin’ welder”😂🤣

@yhird Жыл бұрын

Great welding work Eric. Cheers.

@pophamlarry Жыл бұрын

You never cease to amaze Eric.. Very impressive idea...😊

@gerryboard6615 Жыл бұрын

A good honest repair from a good honest shop owner. Another opportunity missed to pull someone's pants down over the price !!

@cfmcguire Жыл бұрын

Looks a hell of a lot better than soup cans and hose clamps on my 62 Ford Fairlane. Mission accomplished Mr. O.

@dano336 Жыл бұрын

wow!! I was just remembering 65 ford van ..50 miles away in binghamton..early 70's green bean cans cut out both sides ... tin snips hose clamps ...fixed!

@stevenm3141 Жыл бұрын

Eric O. You are already hired to do any welding necessary! No questions asked!

@wingman8447 Жыл бұрын

Nice work. More than good enough. Thank you.

@scottnusser6232 Жыл бұрын

On the loose ends some times I cut a piece off a scrap pipe,about 1/2" wide, then slice the "bushing" piece to wrap tight around the pipe to take up gap before welding. Like you said expanding rusted pipe weakens it even more by stretching the metal that's there. The bushing method also helps to keep from blowing thru when welding already weak rusty pipe. Hope that's helpful😅

@jerrys2346 Жыл бұрын

"We aren't sendin' it to the moon." I can always count on a one-liner for an LOL.

@jimbriggs70 Жыл бұрын

Do love your comments on the products and why you use the parts you use. It keeps me from wondering why you went with what I consider lower quality components. And I hope you understand that your videos is a large reason for my attitude. I used to think cheapest is " more gooder " but at 76 years of age I have developed the mindset of thinking . "I WANT TO INSTALL THE PART THAT LAST THE LONGEST OR AT LEAST AS LONG AS I DO " and damn the cost. I have become lazy in my old age.

@eltonyancey6426 Жыл бұрын

I love how you save customers money whenever you can.

@rsanchez5676 Жыл бұрын

Your weld settings sounded perfect!

@DIYDaveOK Жыл бұрын

Awesome as always, thanks Eric!

@stevenpetty1694 Жыл бұрын

Mr. O excellent repair 👍

@shopteachr3014 Жыл бұрын

I have a 2017 which I guess is similar underneath. I’ve not really seen what it looks like from below so thank you! Hopefully I don’t have that same exhaust but with my luck - Keep up the great work.

@GetReal3327 Жыл бұрын

Great job Eric, you can only do what is right for what it is, but that the end of the day, it works as it should, and saves your customer a lot of money. Have a nice day Eric O

@billmartin4602 Жыл бұрын

Good job Mr. O I’m not a welder but I can stick metal together, well that’s what I tell my friends.

@clyde80226 Жыл бұрын

Great video! Thanks for doing what you do!

@bobmanzi7712 Жыл бұрын

the weld looked perfect from here, great stuff thanks

@mattbrown5511 Жыл бұрын

You did better than the last muffler shop I went to. My hat is off to you.

@mikeroup2721 Жыл бұрын

Nice job as usual. I've done this before but with a flux core welder and no lift (laying on my back). I don't have a good pipe expander so I use a hammer to close the pipe gap! Not much fun but it saved my family a lot of money over the years.

@mikevonkleist6767 Жыл бұрын

Different video but may I share this observation. I've been at this for 40 years and when ever I watch you work it inspires me to go more and to do more. You offer us good times and rewarding results. Make our customers trust us. Eric, you the best. On behalf of all pro techs, we thank you.

@FishFind3000 Жыл бұрын

3:00 a 2019 with a rotted exhaust! Jesus it took 10 years for my f150 to rust out the flex joint 2 days ago.

@AaronBelknap Жыл бұрын

You know as an OLDER GM lover, I was happy to see a Ford in the shop. Alas, just rusty exhaust! I think those welds turned out great. Too bad about the salt belt some nice cars getting wasted from rust! Mom’s old 2010 Escape 2wd still looks new underneath! Now if that 4 banger had some power it’d be nice!

@kevinkoepke8311 Жыл бұрын

Another first! I've never seen a drive shaft and exhaust follow the same path. Thanks Eric!

@robertrosicki9290 Жыл бұрын

A long time ago in a land far far away I was a CWB ( Canadian Welding Bureau ) certified welder . To me that weld looked just fine . Eric , contrary to your statement you are a very good welder .

@bill8by5 Жыл бұрын

Eric, for the past 40 years, I've welded my share of things, exhaust, tinwork, aluminum, pipes, etc. You did a very nice job on this, regardless of what others may say. You go through all positions on one of these and from what the camera shows, you nailed it all up - it won't leak and the weldments look fine. It was a great help to clean the parent metal of rust before you started welding. That FeO2 makes for horrible welds. Since I live in Texas on the Gulf, I call it Gulf Coast Ferronoma - or, Rust Cancer due to location. Much like you experience in the PRNY. Hahahaha. Keep up the great work and making fine videos.