Ford Focus (2001 - 2005) - Coolant renewal
Рет қаралды 15,961
3 жыл бұрынDo you need to replace the Coolant on your 2001 to 2005 Ford Focus but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Focus manual covers 01 to 05 reg plates, both petrol, and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual here: haynes.com/en-gb/ford/focus/2...
What's covered:
Petrol:
Ford Focus Hatchback 1.4L (1388cc) (2001 - 2005)
Ford Focus Saloon 1.4L (1388cc) (2001 - 2005)
Ford Focus Estate 1.4L (1388cc) (2001 - 2005)
Ford Focus Hatchback 1.6L (1596cc) (2001 - 2005)
Ford Focus Saloon 1.6L (1596cc) (2001 - 2005)
Ford Focus Estate 1.6L (1596cc) (2001 - 2005)
Ford Focus Hatchback 1.8L (1796cc) (2001 - 2005)
Ford Focus Saloon 1.8L (1796cc) (2001 - 2005)
Ford Focus Estate 1.8L (1796cc) (2001 - 2005)
Ford Focus Hatchback 2.0L (1989cc) (2001 - 2005)
Ford Focus Saloon 2.0L (1989cc) (2001 - 2005)
Ford Focus Estate 2.0L (1989cc) (2001 - 2005)
Turbo-Diesel:
Ford Focus Hatchback 1.8L TDCi (1753cc) (2001 - 2005)
Ford Focus Saloon 1.8L TDCi (1753cc) (2001 - 2005)
Ford Focus Estate 1.8L TDCi (1753cc) (2001 - 2005)
Ford Focus Hatchback 1.8L TDDi (1753cc
Ford Focus Saloon 1.8L TDDi (1753cc) (2001 - 2005)
Ford Focus Estate 1.8L TDDi (1753cc) (2001 - 2005)
Including special/limited editions
Exclusions:
Does NOT cover 1.8 litre dual-fuel engines. Does NOT cover RS, ST170 or C-Max, or 'new' Focus range introduced January 2005.
@1Proxicus 2 жыл бұрын
Just an FYI to everyone the step of removing the hose is quite important as with these systems it's easy for air to get trapped. Trapped air my not cause any issues straight, away but after a long drive the coolant may be forced out of the cap on the resivour. There is another way which isn't necessarily easier but uses 2 pipes that are more accessible.
@HaynesManuals 2 жыл бұрын
Thanks for the tip!
@andywhite767 2 жыл бұрын
i have to say?i have the 1.8 zetec 16v engine in mine,04 reg,and have had a few cooling system issues recently,(leaking and such),but not once when refilling the system have i ever disconnected the heater hose?never had any issues ,but also never been told this or heard this before...
@marek-kulczycki-8286 3 жыл бұрын
Shouldn't you open the heater valve (turn the heating on) before draining (and keep it open while bleeding a new coolant into the system)?
@HaynesManuals 3 жыл бұрын
There is no actual heater valve in the coolant circuit, so turning the heater on or off won't affect the coolant flow. It should bleed fine using the procedure in the video!
@marek-kulczycki-8286 3 жыл бұрын
@@HaynesManuals Thanks a lot!
@dullaf4099 2 жыл бұрын
With the upper heater supply hose, you say disconnect that and do what exactly?
@HaynesManuals 2 жыл бұрын
With the upper hose disconnected, add coolant until bubble-free coolant emerges from the hose/stub, then reconnect it. It's just a way of allowing the air to escape.
@benws8246 3 жыл бұрын
Hi. Just for clarification, is the heater supply hose the top or the bottom one? Thanks.
@HaynesManuals 3 жыл бұрын
Disconnect the upper heater hose at the engine compartment bulkhead.
@benws8246 3 жыл бұрын
@@HaynesManuals thanks.
@albg8939 Жыл бұрын
I Couldn't start the car because the key is in the bonnet lock
@Jackjackjaxk 9 ай бұрын
Do you run idle with the reservior cap off?
@HaynesManuals 9 ай бұрын
Yes. After the initial filling, this is what the manual says: 'cover the filler opening to prevent coolant splashing out. '
@dullaf4099 2 жыл бұрын
How did you start the engine while the key remained in the bonnet lock? You assume everyone has 2 keys?
@dylanp552 Жыл бұрын
Take the key out the bonnet when it's unlatched
@andywhite767 2 жыл бұрын
never with any car ive had for that matter..
IDP Film
Рет қаралды 130 М.
TheSoul Music Jam
Рет қаралды 19 МЛН
Poly Holy Yow Spanish
Рет қаралды 27 МЛН
How To with Lech
Рет қаралды 494 М.
The Parts Factory
Рет қаралды 8 М.