I had no idea that so much work was put into outfitting our vehicles (not your company, I work in a different location in the country). I always assumed that a "Police Interceptor" from Ford came with almost everything done. I didn't know that a company had to do such intense, hardcore work like stripping the car down to basically a shell and then custom installing everything. I am truly surprised by this. I will definitely appreciate our vehicles much more now. A big thank you to those who do this work---we put these vehicles through hell, and I have never had anything fail except roughly 20 or so years ago when the Vector light bars came out and the dumb decision was made to connect them to the user-unfriendly GE control box (combo PD radio and lights/siren control head). Those individual "pods" would turn themselves on all the time. It was especially bad when working patrol graveyard shift, and as we would be slowly driving "blacked out" through a neighborhood, out of nowhere one of the pods would turn itself on and rotate slowly one "click" at a time. Even if we powered off the GE control head, it would keep doing it. Naturally, we'd have to "down" the vehicle and leave it in the underground garage sitting there with one of the pods it up, slowly clicking it's way around and around. They were chronic in doing this! I was so glad when we switched to the low-profile clear/LED light bar. So much nicer!

I would LOVE to build police cruisers for a living!!!

Nifty neat-o! Love the setina pushbar!

You guys do some amazing work. I have seen some sloppy work done by other businesses. Very clean.

GREAT WORK ON THIS SUV VEHICLE SIRENET THANKS FOR SHARING.

I love these, keep them up!!

I've had the ability to drive one of these. Despite having a V6 it is extremely quick and nimble and more capable than an expedition or Tahoe.

Wow! These guys are amazing!

Very nice Build !!! Great seeing the Installation Process

This is what I do for a living. Absolutely love it!

As with the Charger video - very interesting. A lot of work, but again done cleanly and thoroughly - great job. 👍🏼😊 Minor detail - considering how thorough everything is done, I would have expected the divider protecting the electronics in the back to be dark/black too, like the other dividers/walls. But of course, that the divider does its job is most important. Look forward to seeing the finished modding of the lawn mower to regulatory standards. 😄

Awesome work guys!

10:17 I didn't know that Setina also made side reinforcing brackets for the existing bumper beam assembly. It seems to be for the fender protectors.

Great video as always. I just wish there was a way to get that cage to move with the seat. The new SUV's are deceiving as far as room goes. You could mess around with the Crown Vic cages (not good for safety) but at least you could lower the seat back. Intersting to see how the bolt on. Thank you.

Great video, keep them coming :) can you please do a video on how to set up the cencom

pretty coo stuff! lots of work involved!

that push bar looks like it'll work perfect for a pit manuever

Great work guys

Awesome video as always! You guys should mount a lightbar on that lawn mower too ^^

Ficou muito maneiro, esse deu trabalho, também essa suv é um luxo de carro. Que trabalho maneiro.

I'm not a huge fan of the split blue/red on the lightbar. Red on the driver and blue on the passenger side is more effective in my opinion. Also, I'd like to see in your next install video how the cencom wiring and programming works. Thanks for the video as always.

Nice work, I just want to learn how you build this so I can to reinstall the seat back to the original condition.to use the vehicle for non-police work👏

The vehicle itself was built at Fords Chicago Assembly Plant on the south east side of the city.

Nice professionally routed wiring with full functioning light, siren, radio systems. the unit requires high amp alternator with dual batteries to sustain the power requirements

Ted ...must be a former NASA ENGINEER , numerous wires - locations , hats off to ya

Nice video. Getting ready to upfit my 2016 PI Ute for EMCOMM. It's awesome how much prewiring Ford has done. Should make it a snap. Just wish the upfitter guide was a little more informative.

2 questions! What is the 'power tamer' and where can i find it? Also I see it looks like there was a breaker/cut-off switch on the back circuit board as well. Where can I find that?

awesome video! Im actually your Trash man at your Tigard location.

you can have any light on the car you want; it depends on if you use them, or how you use them.

Love to install equipment for a living

would you guys consider selling those fog lights brackets that he made for the 2E series?

It is great. I am 15 and plan on going into the fire department when i turn 18. It is good to know how to wire all of this stuff up. (I live in NY where we don't have strict laws about about the lights. Just that volunteer fire fighters have to run blue lights).

Anybody know where the siren control harness on the outside of the 2013 FPIU would be?

Love theses

Nice work.

You guys do great informational videos, Any chance you could post a video showing how to remove the headliner and rear side panels on a Ford SUV.

IS IT ILEGAL TO HAVE THE WHITE LED FLASHING LIGHTS ON THE VEHICLES IN CALIFORNIA ANYONE KNOWS? THANK YOU.

Very nice set up you guys awesome job I was wondering what kind of speaker was used for the radios and where did he put it at,??????? AAAAAAAA++++++++++

Yea other buildings of like road work trucks would be cool

How come none of these interceptors (or the ones I have seen at least) have wig wags?

love making brackets but.... you can purchase the factory fog lamp brackets from ford and bolt the warning lights to them.

It is still going to be an Up hill battle trying to replacing the Crown Vic... Reliability & Costs are not going to compare.

Hey the maintanence people where I live have the same drimel!!

Is there any way how to install a door light switch for the interior light to turn on when you open the door on the 2007 crown Victoria ? thank you

How long did this all take?

i love that car :D

Wondering where to wire up a rear traffic advisor light and a stream light flashlight charger in a 2016 utility. Just looking where to start and do it correctly

i just want know, how much is this?

Wish you guys Did this Stuff in TN near my area looks good tho.

I would certainly like to get the dimensions of those grille light brackets. Would large fender washers work in a pinch?

I wish this vehicle would have been outfitted with the back window light bar as well as side truck warning lights. A back storage compartment would also have been nice. I prefer the single seat cage for extra space in the rear seating compartment for non criminal transport/ extra storage space for the officer. But I know that this specific vehicle was requested like this. Do you offer a multi level side protection on the setina push bumper as well for this model?

I still want one of those jackets

How can I get a wireing harness for dodge ram 1500 07 st like the one in the video

Greetings! My question is the following, after a interceptor becomes a civilian car do you restore them to civilian format? And remove the rubber flooring and that ugly center light that looks like a circle? Like do you restore the gear shift from behind wheel to the center? I talking about a Taurus

How did you remotely send the patterns to the unit?

Sweet!!!!!

Star Cars isn't all that far from me.....perfect.

what name this police lights??

why don't you also change headlamps to LED instead of stock from manufacturer?

what is the light bar being used here. what is the make and model??

Bet the neighbors love all that.

Is the siren controller in this unit a dual tone siren ans if not is there one like it that is?

What's the average time you spend preparing a vehicle for a department?

we need these cars in UA!

i see that you guys are always doing police, do y'all do any public work/roadside assistance, or plow trucks? if so would love to see some videos of them!

Nice video tho :)

does that company also mod cars besides build law enforcement vehicles?

Do you know how or where to connect the rear hatch LEDs so they only come on when the hatch is open on a 2017 ? the upfitters guide mentions a rear flasher relay but I don't think I have that option. I have the front grill/headlight solution wiring option only (option 66?). If you don't hook them up to turn on when the hatch is open you can see them inside the vehicle. Thanks, and good looking work you guys are doing!

that should be the new commercial to toyota response last part

SIRENNET..... Is it at all possible to put WHITE WIG WAG lights in the front too? I have found with mine (2016) that simply turning on the headlights makes the vehicle MUCH more visible, just FYI. I would also add that the small quarter sized LED lights that are usually installed do NOT work very well in daytime use.

What lightbar is that?

Are theese turbocharged? Ive heard some rumors that they are

I have a 2022 Ford Police Interceptor Utility, is it difficult to install a dome light (came without one)?

How much would this cost to make it into a security car

*Does Anyone Know If I Can Put A Amber Light On My Roof Of My Car, In California?*

What is the Motorola thing in the trunk for? Cause I have a Motorola mcs2000 and it's programmed but nothing comes out of it

Unless the car fleet came with factory spotlights which they don't why didnt u add that in the video!?!

Question. I know it's been a long time but how tall is that wooden rack on wheels holding the electrical wire spools?

California State Patrol?

I wonder if this specific vehicle has been retired from service yet.

StarkTech?

28:55 Oww i here my name

What about the headlights, shouldn't they flash as well?

Are you original from the uk

Do these actually go to police officers

Request: Star Car Blooper Reel

Sorry you didn't say the name of the vehicle enough. What is it? 😂

How much does it cost to build one of these not including the donar car?

Star car incorrectly seal the wires running though the roof of the vehicle. Silicone should not be used.

If I lived in that neighborhood, I would be pissed off if these guys test drove every vehicle they upfit.

Is this for Washington State Patrol?

Can you guys do work on a Range Rover?

Terrible work done in my area, whoever does them don’t care. This is doing it right

What accent is that?

Kinda pisses me off this car has a Volvo platform and nobody knows it..

wow

whatchout @ 18:16 Headphone users

I own a 2014 ford explorer regular Not a police car but police think I work with them

What is the accent going on here? It doesn't sound completely american...

Brick prule