A quick and simple fix if your seat becomes jammed and will not recline. The cable has most likely slipped out of it's holder, and a simple zip tie will keep in place.
Пікірлер: 17
@sonicballroom4 күн бұрын
Thanks for the fix. This was exactly my same scenario. I'm back in action now.
@channel210604 жыл бұрын
Awesome post. Thank you for this. Saved me a lot of trouble and expense. Mine wasn't broken it had just escaped it's slot. All good now. Thanks again. Good job.
@kirthikakathiravan2472 жыл бұрын
Hello sir good evening I'm working from lear automotive india seating company last two month we are facing recliner function skip lock issue and huge qty rejection and it will be scrap, I need your best suggestions for avoid this issue any idea please share me sir
@shartne2 ай бұрын
Probably what mine did too. I will check it out. thanks
@danielp61002 жыл бұрын
That is exactly what my driver seat needed too. Thank you, sir!
@unclehapdarragh78664 жыл бұрын
Awesome post. Thank you for this. Saved me a lot of trouble and expense. Mine wasn't broken it had just escaped it's slot. All good now. Thanks again. Good job. ME TO 3 phillip screws cover popped right off. pushed cable holder back in the slot. 3 screws back on good to go. THANK YOU HAVE A GREAT DAY
@jameschandler9572 жыл бұрын
My ranger seat was stuck too.I took the cover off just like you showed.Revealed no damaged cable luckily,but it was stuck never the less. So I dusted off the spring mechanism like you did and sprayed it with silicone,still was stuck.Figured I needed some thing little stronger then that plastic handle to break it free ,Attached a pair of vicegrip pliers onto the bar where plastic handle screws onto.I then lifted up a little on the plyers and it came free .problem solved .
@jakematheny4 жыл бұрын
Thank you my friend, this led me straight to my problem. All fixed, thank you thank you thank you
@deongeiss12 Жыл бұрын
That was exactly what I needed. Thank you
@adamrodriguez48673 жыл бұрын
Definitely help with my issues! Your amazing!
@rtothemutha4 жыл бұрын
Gonna try that tomorrow. Thx
@jlaw55195 ай бұрын
Thanks bro saved my back with this one lol
@stanschaefer20596 ай бұрын
Thank you! I thought about using jbweld to fasten the broken plastic nipple thing to the bracket but I think the zip tie is a better solution. Annoying problem solved!
@ethancroppermusic908310 ай бұрын
I love KZfaq. I was freakin the hell out cause I thought I was going to have to buy new seats
@artparsonsdrumproject24213 ай бұрын
Nice!
@JohnCornellier4 жыл бұрын
I wonder if the previous owner(s) had more than one driver. Most people "set and forget" that lever, so it's realistic Mazda/Ford didn't spec it to be last 1000s of uses.
@QuaabQueb4 жыл бұрын
Could be, it also sees use in accessing the back seat area if you put things back there, as I now often do. Still a cheaper part than an electric motor. Though I do plan to swap the seats at some point with fully electric and heated ones out of the same generation Ford Exploder