Ford Ranger & Mazda BT-50 Nomad Valve Body Install

Рет қаралды 53,722

2 жыл бұрын

Daniel from Wholesale Automatics demonstrates how to install a Nomad Valve body into a 6 Speed Ford Ranger. This tutorial also applies to the 6 Speed Mazda BT50 with the 6R80 transmission.
Get the cleaner shifts that you want with this amazing product!
The Nomad Heavy Duty Valve Body upgrade is the perfect companion to any touring or towing vehicle and is a must for any one hitting the open road towing a caravan or running an engine upgrade such as a performance chip, exhaust system, or flash tune. Benefits include:
- Higher clutch clamping force.
- Better oil flow.
- Reduced temperature in torque converter and transmission.
- Approximately 1L/100km better fuel economy.
- Better lubrication.
- All OEM valve body faults are resolved.
- Better engine braking by approximately 10%
- Cleaner, slightly crisper shifts removing indecisiveness / shift delays for both up and down shifting.
- Improved drive experience and engine responsiveness.
automatictransmission.com.au/...

Пікірлер: 98

@josht3261 2 жыл бұрын

I’m just about ready to order a valve body and cooler kit so your videos have come out just in time.

@WholesaleAutomatics 2 жыл бұрын

Perfect timing then Josh

@jemty9564 2 жыл бұрын

Great to watch guys. Cheers from two West Aussies in Saudi Arabia

@WholesaleAutomatics 2 жыл бұрын

Thanks for watching!

@mervpatterson2042 Жыл бұрын

Excellent video fellas opened my eyes to some of the problems that might be misdiagnosed on my BT50 !

@WholesaleAutomatics Жыл бұрын

Glad it helped

@prevost8686 11 ай бұрын

Ford used to have a converter drain plug on their rear wheel drive transmissions. I guess since they decided that transmissions no longer required service that a drain plug was not needed.

@markwalker5231 5 ай бұрын

Great instructional vid, best I’ve seen 👍

@WholesaleAutomatics 4 ай бұрын

Thanks for that Mark👍

@babrananyonga7608 2 ай бұрын

Excellent 👌👍

@WholesaleAutomatics Ай бұрын

Thank you! Cheers!

@chrisduckworth2022 2 жыл бұрын

As part of a "Trip Ready" check by my favourite 4WD place in FTG, they noted my trans oil has moisture in it. Possibly one of the deeper water crossings may have allowed some water in via the breather or some other entry point ? As part of the next service, they drained and refilled the trans fluid and OMG.. the difference was actually noticeable. So, the "Sealed for life" actually seems to be incorrect. This work was done at about 130K kms on my PX1, so worth a check on your Rangers at similar K's. I don't do much towing but I do a bit of track work and I'm setting up for longer touring trips, so anything that will help fuel economy, engine braking, reliability etc is probably a worthy upgrade. Cheers for the video, they are always appreciated !

@WholesaleAutomatics 2 жыл бұрын

Goes to show how inportant it is to service your transmission, once every 2 years or 50,000Km's

@fhclappen8595 2 жыл бұрын

My Wildtrak 3.2 now has 283 000 km on. Auto Gearbox oil has never been changed. In not towing, did some off-roading, nothing too harsh. Never had a problem. Changes gears as always. This lifetime thing is a mystery. What lifetime can there be between an abused vehicle and one that wasn't abused? Has anybody got an answer to this?

@WholesaleAutomatics 2 жыл бұрын

@@fhclappen8595 check this web link out: automatictransmission.com.au/newsletter/servicing-sealed-transmissions/

@perpelle 2 жыл бұрын

This is strange. I don't believe in sealed for life one bit but the average Joe who service their vehicle at an authorized dealer won't get the fluid changed = problem. What does Toyota say about their auto in the hilux? Sealed for life as well? They certainly want you to change the oil very regularly (15 000 km). Almost to often imo.

@deanhumphrey1382 Жыл бұрын

Does this help stop the "flare" in the gears when towing, feel like when my ute tows it take a long time for the converter to lock into a gear and stop revving un necessarily.

@einfelder8262 2 жыл бұрын

I'm surprised that you don't fit a drain plug as part of this upgrade. Would be dead easy and make servicing a breeze. Sealed for life transmissions are a very bad thing.

@WholesaleAutomatics 2 жыл бұрын

Many customers fit our new Deep Cast Aluminium Pan that comes std with the drain plug. This upgrade is extremely common when doing a transmission service, Nomad valve body upgrade or thermal bypass valve, here is the web link: automatictransmission.com.au/shop/ford-6r80-deep-pml-transmission-pan/

@CKJautomotive Жыл бұрын

I do this to every 6R80 that comes through my shop. Recently replaced the trans on my 3.2 and that was the 1st thing I did. Will change the fluid again 1000km after the replacement then do the thermo bypass and fit a modified/billet oil pan for more capacity. I have also removed the oil/water cooler and fitted 2 oil/air coolers up front with a fan.

@4bnewb969 2 жыл бұрын

Good job 👍 certainly messy without a drain plug. With the state of that oil, you do wonder what length of time (or kms) Fords ‘sealed for life’ means. Is that trans , Fords or a trans makers unit like the Aisin unit in Tritons, Hilux, Prado etc ? Cheers

@WholesaleAutomatics 2 жыл бұрын

This transmission is Fords, but it was designed by ZF and licenced to Ford. It is very closely related to the ZF6HP26 transmission that has an internal transmission electro-hydraulic control module, more widely known as a TECHM, while the Ford 6R80 has a combined engine/transmission management system (ECU).

@BenMitro 2 жыл бұрын

Thanks guys. That was surprising and illuminating. The valve body looks like a really robust bit of aluminium casting, where it would appear will never wear out, why was it necessary to change it?

@BenMitro 2 жыл бұрын

PS, pardon my ignorance!

@WholesaleAutomatics 2 жыл бұрын

Almost every Ford Ranger/BT50 valve body we see seem to have several faults, most to do with severe valve bore wear and leak-by. We test each valve body for leak down problems and modify to stop this from happening again. Eliminate all leak down problems and we can even reduce valve ware by 95% simply by reducing transmission temperatures. Unfortunately, a lot of owners are told they need unnecessary rebuilds when problems do occur when 80% of the time a ungraded valve body will solve the problem

@BenMitro 2 жыл бұрын

@@WholesaleAutomatics Ahh, I get it. Poor design, high pressure and temperature produces leaks in the valve body. OK, didn't know that, thanks.

@WholesaleAutomatics 2 жыл бұрын

Not so much design but more poor choice of materials considering how hot this transmission is being run. An oil cooler makes a massive difference to the longevity of the Ford Ranger/BT50 valve body.

@johnhargreaves2647 Жыл бұрын

Hi great video 👍 my question is I have a 2017 wildtrack 3.2 that’s done 47000 miles what would your advice be to do if anything at all to look after my transmission I intend to keep the vehicle and the miles will increase so any advise would be greatly appreciated thank you.

@peterlevy7679 2 жыл бұрын

In your opinion is it worth changing the fluid and what fluid would you use, cheers love you video's.

@WholesaleAutomatics 2 жыл бұрын

Yes, the transmission Must be serviced once evey 2 years or 50,000km's Peter. Any full synthetic automatic transmission oil will work perfectly for the 6 speed Ford Ranger.

@baron30001 2 жыл бұрын

Are you guys going to make one of these diy videos for the 6 speed aisin unit that is used it the dmax, triton and hilux?

@WholesaleAutomatics 2 жыл бұрын

Do have one already available on our web site and will be putting it up on KZfaq in the coming weeks but in the meantime here is the web link: automatictransmission.com.au/technical-support/valve-bodies/install-videos/ac-60-nomad-valve-body-2/

@kman6482 2 жыл бұрын

Had Ford do mine, only for warranty purposes.

@nitsujnaej 11 ай бұрын

Pretty dumb not to include a drain plug in the bottom of the pan.

@poopathyraaja9949 2 ай бұрын

Agreed 👍

@BCBtrucks64 Жыл бұрын

just wondering about the cooler valve being used in this install i'm just about to do the cooler /heat exchange swap and cooler bypass valve and alloy pan with the stock valve body (2016 ranger ) the cooler bypass in the video looks like a solid unit is this one only compatible with the revised valve body as opposed to the one i have has the four holes in the middle part of the body towards the top sleeve and one smaller hole towards the bottom sleeve being a cooler flow control valve from Superior Solutions

@WholesaleAutomatics Жыл бұрын

No they both work exactly the same so valve body doesn't make any differnce.

@johnsmith-ub7vr 10 ай бұрын

Ball park what does a repair like this cost?

@angesrcs Жыл бұрын

Hey guys great video. I have a 2012 4x2 BT50, with 75,000 on the clock. do you recommend a trans cooler kit, even though i will never tow a caravan or work trailer. it would just be the odd visit to the tip with a small trailer.

@WholesaleAutomatics Жыл бұрын

Yes, absolutely Anges. Even you don't intend to tow an oil cooler will make your transmission last a hell of a lot longer, and I mean a lot longer!

@angesrcs Жыл бұрын

@@WholesaleAutomatics ok thanks heaps. I was getting mixed messages to put one in, should I get the bypass valve also?👍🏼🚗.

@olnarhargats8902 Жыл бұрын

Hi. I have problem with my ranger px2 transmission range selector, what is part of a lead frame body. I got a brand new one, but it came with valve body. In case I get it replaced as a whole ( lead frame assembly and valve body) do I have to get it programmed/reset in ford dealer? Also same question if I just get the lead frame assembly replaced. Thanks!

@WholesaleAutomatics Жыл бұрын

As long as you are not changing the solenoids or changing any of the solenoids from their original position then no, you don’t need to reprogram or reset the computerr.

@jorjimaco5331 2 жыл бұрын

👍🍻🛠

@BenoJ3000 2 ай бұрын

I have a US mustang with the 6r80, would these or the heavy duty be a good fit for these transmissions?

@WholesaleAutomatics Ай бұрын

Yes but we would need to do your own valve body.

@silviucocir2014 Жыл бұрын

hallo , can you please tell me where is located Output Speed Sensor ( OSS ) in this 6R80 automatic transmission?

@WholesaleAutomatics Жыл бұрын

it is part of the lead frame on the valve body. You can order a Heavy Duty Nomad Valve Body and request that it comes with lead frame. Email rodney@askorto.com.au

@johntrueblue Жыл бұрын

Ive just resently bought a 21 model Wildtrak so Is there a version for the 10sp transmission?

@WholesaleAutomatics Жыл бұрын

We are starting this development program October this year when our new Ranger arrives.

@johnmarieriley8604 10 ай бұрын

I have a 2012 ranger and gear change down from 5th to 4th is really harsh, will doing this fix the issue ?

@WholesaleAutomatics 10 ай бұрын

Yes this is fairly common John.

@yosefbegic8851 Жыл бұрын

I have your cooler and bypass fitted, will this body stop the clunk in the box on my 2019 BT50?

@WholesaleAutomatics Жыл бұрын

Most likley Yosef.

@darrenpolwarth5686 Жыл бұрын

Hi , So when your cooler bypass valve is fitted the spring is also removed and not fitted with your bypass valve ?

@WholesaleAutomatics Жыл бұрын

Yes thats correct. the valve is made to reach both ends so it doesn't move.

@darrenpolwarth5686 Жыл бұрын

@@WholesaleAutomatics thanks , just wanted to be sure . Cheers

@peterantonic6923 Жыл бұрын

Thank you for shedding some light on the “Sealed for life crap” manufacturers are trying to sell. The fluid in that tranny was absolutely stuffed, black as can be. How on earth do they expect the tranny to last the life of the vehicle, especially if it is used for towing by tradies? I was very surprised you didn’t flush the converter, lines and cooler- they would have been full of the black burnt oil that was in the pan. Surely another $100 or so in oil wouldn’t have broken the bank?

@aldrinosiasibarreta7688 7 ай бұрын

Why there's no drain plug in the bottom of the pan.? Can we modify and put a drain plug on it? Can we?

@WholesaleAutomatics 5 ай бұрын

Far Easier and more beneficial to install the deep cast aluminium pan that has the drain plug as well. automatictransmission.com.au/shop/ford-6r80-deep-pml-transmission-pan/

@christopheradams5879 2 жыл бұрын

HI GUYS WHAT ARE THE SIGNS THAT YOU NEED TO DO THIS? HOW MUCH DOES IT COST? AND DO YOU RECOMMEND ANYBODY IN BRISBANE TO DO THE JOB? THANKS GUYS

@WholesaleAutomatics 2 жыл бұрын

We find that 50% of customer do the valve body because they want the upgrade for much better shift feel and complete reliability while the other half are doing the upgrade because they have started having problems with the transmission, most notably shifting issues. We have a couple of installers in Brisbane and the Heavy Duty Nomad Ford Ranger Valve Body is $2276 inc gst "Fully Fitted" in Brisbane.

@wozgetley5722 Жыл бұрын

Whats the full cost of this replacement / upgrade 👌👍 great vids too

@WholesaleAutomatics Жыл бұрын

Check out our website askorto.com.au or calls sales on 03 9762 8004

@MrVenville 2 жыл бұрын

What are the advantages of changing the valve body ?

@WholesaleAutomatics 2 жыл бұрын

The factory valve bodies have several faults, most to do with severe valve bore ware and leak-by. When we build a Nomad valve body we increase base-line pressures, increase lock-up pressure, massively improve cooler flow, test each valve body for leak down problems and modify to stop this from happening again. Eliminate all leak down problems and we can even reduce valve ware by 95% simply by reducing transmission temperatures. You transmission becomes fully serviced and flushed with new oil, oil filter, pan gasket and case sleave. All OEM upgrades are done. Unfortunately, a lot of owners are told they need unnecessary rebuilds when problems do occur when 80% of the time a ungraded valve body will solve the problem.

@tonychristensen6714 Жыл бұрын

what does it cost to have the valve body replaced on a px ranger ? my nephew was just quoted 6k

@WholesaleAutomatics Жыл бұрын

Our heavy duty Nomad valve body is $2400 inc gst fully fitted with full flush full synthetic transmission service. Also comes with thermal bypass valve. Does not include lead frame or soliniods but we only replace these if they fail testing.

@hoaniwitana1104 6 ай бұрын

Is this trans the same as the 10 speed.

@WholesaleAutomatics 5 ай бұрын

No it is a completely different design.

@Paul-qq7mh Жыл бұрын

How hard is it to install a drain plug.

@WholesaleAutomatics Жыл бұрын

Better to fit a deep cast aluminuim pan Paul, here is the diret link: automatictransmission.com.au/shop/ford-6r80-deep-pml-transmission-pan/

@peterlevy7679 2 жыл бұрын

Why do you change the valve body.

@WholesaleAutomatics 2 жыл бұрын

The factory valve bodies have several faults, most to do with severe valve bore wear and leak-by. When we build a Nomad valve body we increase base-line pressures, increase lock-up pressure, massively improve cooler flow, test each valve body for leak down problems and modify to stop this from happening again. Eliminate all leak down problems and we can even reduce valve ware by 95% simply by reducing transmission temperatures. You transmission becomes fully serviced and flushed with new oil, oil filter, pan gasket and case sleave. All OEM upgrades are done. Unfortunately, a lot of owners are told they need unnecessary rebuilds when problems do occur when 80% of the time a ungraded valve body will solve the problem.

@usamawarraich7571 Жыл бұрын

Hey where can we order this?

@WholesaleAutomatics Жыл бұрын

You can find our products on our website - automatictransmission.com.au/

@benni727 Жыл бұрын

how much dose this exercise cost roughly

@WholesaleAutomatics Жыл бұрын

Fully fitted about $2195 inc gst for the Ford Ranger/BT50 3.2L. Includes transmission and thermal bypass upgrade.

@steveaxemon Жыл бұрын

When you change the lead frame can the car self learn or you need to program

@WholesaleAutomatics Жыл бұрын

Not for the lead frame Kleve. Even if you have to change solenoid, as long as it is the same calibration code you still wouldn’t need to program and self-learn would have little if anything to do.

@shanephillips3882 Жыл бұрын

Is there anyway to check if solenoid is ok or rat shit?

@WholesaleAutomatics Жыл бұрын

We can test them in house but they can't be done without the equipment.

@fredorji1 2 жыл бұрын

what do these valve bodies do that the original dont ?

@WholesaleAutomatics 2 жыл бұрын

The original OEM valve bodies have a few faults, mostly to do with severe valve bore wear and oil leak-by. We build our Nomad Valve Bodies to increase line pressures, increase lock-up clamping pressure, massively improve cooler flow, test each valve body for leak down problems and modify to stop this from happening again. Eliminate all leak down problems and we can even reduce valve ware by 95% simply by reducing transmission temperatures. You transmission becomes fully serviced and flushed with new oil, oil filter, pan gasket, case sleave and all OEM upgrades are done. Unfortunatly a lot of owners are told they need unnecessary rebuilds when problems do occur when 80% of the time a ungraded valve body will solve the problem.

@fredorji1 2 жыл бұрын

@@WholesaleAutomatics thanks for that , can you recomend any one in perth to install and supply please

@fredorji1 2 жыл бұрын

oh its for a 2019 prado gxl

@oldmanJ Жыл бұрын

Can you ship your cooler kits internationally,(Thailand)

@WholesaleAutomatics Жыл бұрын

Yes, and you can buy online and it will ship direct to you.

@tigerward88 11 ай бұрын

Ridiculous how there is no drain hole

@TheTransmissionman Жыл бұрын

That oil that came out of trans has been overheated, you should have pulled out and overhauled the trans.

@WholesaleAutomatics Жыл бұрын

They are all like this when they don't have an external oil cooler and thermal bypass valve fitted.

@TheTransmissionman Жыл бұрын

@@WholesaleAutomatics IF i had pulled that sump off and found the oil in that condition it would have come out, but also when you dropped the sump of and used a rag to remove all the metal in sump,let along what you may have found if you had opened up the filter. Forgive me,i have a 45 years fixing auto transmissions that don’t come back monday

@WholesaleAutomatics Жыл бұрын

This is one of the best looking pans you will ever see from a ford Ranger. They all look like this after just a few months of running as Ford fits them with a thermal valve that runs them at 90c minimum which is quite high. We service 5-6 of these every day and they are all exactly the same. Except for those than run a cooler and thermal bypass valve. The oil in them looks like the day it went in even after two years on running. The Nissan Y62 and VW Amarok also do the same problem with dark oil. You can open them up as we did in this video and every clutch was perfect! The seals will eventually go rock hard and it effects the valve body horribly as they all fail leak down testing after just 80,000Km's.