A video tutorial on how to diagnose a ford ranger when stuck in limp mode using a $30 interface from ebay & a laptop, this will also work for the mazda BT 50 both the 2.2 and 3.2 motors
Пікірлер: 41
@johncroasdale27482 жыл бұрын
This is what I've been looking for! I tried a scanner with NO luck. Lots of Rangers in Cape Town, but nobody seems to know much about them. Agents are not helpful unless you are paying. No freebies here. Your tutorial is really helpful. Thanks.
@kentweyers1845 Жыл бұрын
Could't agree more. I have a t6 ranger and every mechanic gives me a different story about it
@johnbernetmega84242 ай бұрын
This video introduces me to use forscan ;which many mechanics also don’t have or know. Very useful video and you have contributed greatly to save much money and time for all people around the world. Thanks you
@trabador037624 күн бұрын
🙏🙏🙏 thanks for sharing brother
@bobbymartin80422 жыл бұрын
Friggin awesome 😃
@heathmurphy37352 жыл бұрын
Cheers mate, just bought one.
@trabador037622 күн бұрын
Mate, thank u so much , im keeping my eye on buying Ford ranger px 2.2,so your chanel is gold, just wondering if the forscan can verify the odometer reading? Im looking at a 2013 with 151k, thanks in advance
@marcusbarnes59292 жыл бұрын
Can you do a video showing how to change the tyre size diameter in forscan for 285 70 R17 or 285 65 R18 so the speedo and odometer read like factory reading the 4% under.
@sudarmantodarmadji8896 Жыл бұрын
Good share
@WillemLuntungan Жыл бұрын
Thank you
@rodfirman17792 жыл бұрын
Have you considered doing a video on how to by pass the EGR cooler. Your videos are excellent and a great service to Ranger owners, keep up the great work.
@abdautomotive2 жыл бұрын
yeh i plan too
@neilpiddington1554 Жыл бұрын
Love all the videos! Do you know if it’s possible to remove the crank angle sensor and reinstall with the box still installed? Any videos of this/cas issues/faults?
@abdautomotive Жыл бұрын
yes you can replace CAS with gearbox in place , it's relatively easy to get too
@chedda2871 Жыл бұрын
Hey cobba I know your car might not have it but have you got any mates with PX2 Rangers in manual with the stupid auto-stop/start feature where you gotta press the button to turn it off every time you start? Do you know anything about turning the feature off in Forscan and how exactly to do it? I don't have the little dongle yet but I will be buying one. I came across something on a forum but they just said they 'heard' it was possible and didn't elaborate, people have made eliminator harnesses for USA models 2019+ but don't think anyone has them for 2015-2016+ PX2 Aus models.
@user-hd4ik6ve1n Жыл бұрын
Hi could you tell me why I have a elm on my ranger, I have replaced the exhaust and sensors, I’ve done a forced regen and the light goes off for a week, then comes back on, any would be appreciated thanks
@coadyg2 жыл бұрын
I believe the ms only required for vehicle older than 2005.
@Mosesk1988 Жыл бұрын
Can you turn off egr etc using forscan and this ebay elm 327.
@mathewpaynter9527 Жыл бұрын
Can you use this to fix the egr fault after blanking? Great content mate 👌 appreciate the in-depth videos.
@abdautomotive Жыл бұрын
shouldn't have a egr fault after blanking px 1
@anthonysmith9617 Жыл бұрын
Love your videos mate I've got the 2015 with 105 km on her, love it to bits, just ordered the interface, any chance you can do a video on the other features of forscan? Also have a query regarding the EGR Cooler, I have blanked off cold side and bypassed cooler, should I blank off the hot side? I'm really not keen to tackle that side looks nightmarish, but I did read a forum story that a bloke had blanked off both but the hot side plate split then the cooler cracked and he had an exhaust whistle, would this be caused by no coolant in cooler and just got too hot? He mentioned they had been in 6 years!
@abdautomotive Жыл бұрын
yeh the hot side is harder to do, i run a hot side blank, have done 150k no issues
@acer1929 Жыл бұрын
Very informative videos! Do you have a video on u0001 and u0401 error on the ford ranger 2014?
@TheChrisco196911 ай бұрын
I have same problem as you u0001 did you find the fault?
@MrChrisp3002 жыл бұрын
Do you know how to disable the smart charge with the alternator on 2012 PX Ranger using forscan. For instance which module allows this function?
@abdautomotive2 жыл бұрын
im preety sure on the PX 1 you have to change the configuration on the "As Built data" which gets a bit complex, There is no setting in Forscan i could find to enable or disable it directly.
@brar535310 ай бұрын
would the instruction to connect to the car be applicable to a px3 wildtrack 2L biturbo 2019? thanks
@abdautomotive9 ай бұрын
yeh would be similar
@gxcoupe7044 Жыл бұрын
Hi there can you please assist My 3.2 ranger drives well on crusing But as soon as u pull a small trailer or go up hill and gives some gas it looses power and start chacking. No fault codes or light on display
@abdautomotive Жыл бұрын
possibly needs an intake clean
@rockyronz Жыл бұрын
Hey mate need your advice on the following. Limp Mode Light is on the dashboard I scanned it and it gave me this code P0183:13-AF. Please advice on how I will go about to sort this out. Appreciate your feedback
@abdautomotive Жыл бұрын
have never come across this but at a guess fuel pressure sensor
@rockyronz Жыл бұрын
@@abdautomotive it says Fuel Temperature Sensor High.
@nathanmueller16182 жыл бұрын
Are you selling the ranger the plates are off
@abdautomotive2 жыл бұрын
nope
@bobbymartin80422 жыл бұрын
So this $30 adaptor will work the same as a scanner?