Good tip Tim good to see you back !

As you were walking around the shop I got vertigo and motion sickness and fell out of my chair & I've fallen & can't get up :D Nice tip Tim!

Great video thanks for sharing. Tim I hope you have a blessed summer. I enjoyed​your video.

Great information Tim. I love your take on things.

keep em coming ! I have exact same truck with exact same issue. have already done everything else to try to correct this issue, looks like steering gear is next !

Most shops want to set the caster to 3 3.5 degrees ... The truck needs 6 or more degrees .. The caster pulls the wheel to center ...

Ur teasing me with these short videos. Need to be half hr. Lol. Keep it up bud. Always enjoy anything u post! See ya on the next

I here ya Tim...that gear lash improper will do it. Stay busy and thanks for the Vid!!

How do you measure the torque effort when measuring for the 100 ftlb of torque or less measurement?

is there a replacement gear that works right every time? seems like the reman stuff is hit and miss after not many miles

I used to drive them on the highway when my wrecker broke and man o man everyone was allover the road, scary! Had a E350 van that did the same crap too

Have the same issue on a 2003 Chevy 2500 HD . Had front end aligned, adjusted steering wheel play nut...no cigar. I’ll check ball joint and steering linkage Torque. Any other suggestions ? Thank you!

I have the same problem in 2011 f250. Du you think is the steering weel gear

I haven't worked on a gear box like that in a long time. Older VW's had similar... is it the balls or the channels that get pitted and jam. Can't believe I've forgotten this... I'm not that old (I think).

Can we turn top Allen adjustment on steering box ??

Yep, had to replace my steering gear on my SuperDuty at around 160,000 miles with Cardone unit. But there is still a little bit of wandering and steering wheel has about a 10 degree slop to it. New stabilizer added at same time as steering gear.

My 96 explorer had bad memory steer one day and it turned out to be the steering shaft universal. Sprayed a 1/2 a can of fluid film on it and its good for months now. The boot ripped and the joint dried out.

Redhead makes custom made steering boxes for Fords that eliminate the steering wonder. Steering becomes like being on a rail.

thank you so much

Thanks !!

I have a 2010 lexus es 350 my steering wheel wont return to center. Recently i got driver side axle replaced and it was broken in half smh. Dealership sold it to me like that found out it wasn't even inspected. They shifted the cross member to fix caster issue machine showed it was in the green . Im having handling issue mostly when turning like trying to park its noticable. What could it be at first I thought it was off tracking

hey tim,how did the front diff in the 2010 ford expedition work out for you???

I started to work in a Garage, they have pretty much good business but I never see using Torque Wrench but always they use more long leverage to tighten Nuts & Bolts. It's a bit confusing if proper Torque is very necessary which is, then why they don't have come backs often or Vehicles in the US are pretty System Conscious. I also very often to see that we are bypassing many systems to just keep running a vehicle because Emissions Test not being held here even AC referigent we let go in open Atmosphere.

My 2001 f250 has the same issue. Steering knuckles are free, new steering stabilizer and two Napa reman steering boxes. Still no luck. Alignment perfect. Any ideas?

What's it run to get this fixed? Looking to buy a 2002 F250 with um "super steering" basically the steering doesn't come back on its own. REALLY easy to steer left to right and stays on track but once you turn you have to manually turn it back again. Steering gear. Got it. Amongst other things. Grrrr...

My 2014 f250 dose something like this. Only when it’s driven hard or for long distances with lots of turns and bumps. It is not death wobble for a fact. I know that all to well. Trust me nobody will ever have a issue diagnosing death wobble. If you have experienced death wobble you know immediately that is the dreaded death wobble. When this happens I can’t center my steering wheel bc it seems to skip from left to right when I try to correct the steering. It will continue until I slam on the brakes or until going down hill when it makes a strange noise and the steering goes back to a normal feel. The steering gets loose feeling before the issue happens. This truck is used and was used for DOT training of heavy trainer hauling and then as a fleet truck. Any help is much appreciated. Thanks for the video.

Just replaced my steering gear and still same issue. Any idea???

2014 toyota camrys and up to at least 2017s have the same issue.

SO, DID YOU FIX IT ?

I’m so bummed out with my recently purchased 2018 F250 with o my 35k miles. The steering feels so flimsy and I get death wobble. I wish I would have never bought it now.

what would it mean if your steering becomes effortless and not returning to center? cause thats my issue right now lmao

Yup did all that ...tie rod check ...alignment check ..everything after 2 gear boxes im done with these damm fords

If your computer is in the can than you can do it while your in the can. Just remember the jobs not done till the paperwork is done. nuff said..

Let me guess, front u joints? Now ill watch and find out... Well , dang. 4wd s ive had to replace u joints on several 99- 05 or so ,doing the same thing. Steering wont go neutral on level ground... Good stuff...

Don't call ya the car doc for nothing !!

Or it could be the nut that holds the steering wheel on LOL Just joking :-D :-D

no sound

LMFAO he's working on 3 Fords...i was at my buddies shop a few months ago. He has 5 lifts in his shop and was working on 5 fords...gtfo Ford damn

Damn all I see in your shop is fords

Damn. I have a e350 ford econoline van. I changed the gear box. Adjusted the casters and tow. And I'm still having the same problem. Doesn't go back to center and feels a bit rough to turn. Not smooth. But the power steering still works. I don't know what else to do. My van is in great condition, almost new. But boone can figure it out for me.