True friend = someone who helps do body work!

I never thought a Mustang II would be one of my favorite projects on KZfaq. 😊

Awesome footage out wheeling Dave! Super combo episode

I so appreciate all of the loving that you are giving the Musturd. She is going to be so cool, unique, the nicest Mustang II anywhere!! It's awesome to have A.J. helping and keeping you going on her. Always good to see Mom's Spaghetti, she's a cool one and Bad ASS too!! Us FoMoCo lovers appreciate you! Go to see you wheeling again we know you love that. Way to go Dave!!

Thanks for the reminder to look at my compressor!! I haven't done that in ages, so I guess it is time. haha

That compressor looks just like the Smittybilt version. They do work pretty well.

Great . Fun to watch.

"The Long Board Doesn't Lie". Now you need to do a cover of that Shakira song hips don't lie. 🤣🤣 Bondo is on tonight....the long board doesn't lie and the body line is starting to feel so right....

glad you got out to have some fun, cool place,

Good stuff, Dave. I appreciate that it's not all just offroad or hot rods. Love the diversity in the builds.

The car is coming along nicely 👍👍

Permanent fuel cell for the Mustard 2?!! ... it'll be a used mayonnaise drum! 😆🤣🤣

Best part of that rig is the name because nothing is better than moms spaghetti

Been doing bodywork for over 30yrs, hate being on the knees, love the fact you've got a lift to save your back. Lol. If you want to save your carpal tunnel from the vibration of your air tools. Get a manual board, put some 36 grit on it, and carv that bondo when it's soft. When it starts to set up, and you can just barely sink your thumb in it, start carving. It'll shave down so fast, you'll be done sanding in less then 5 minutes. Once done let it set up all the way, and all you'll need at that point is a skim coat to cover your 36grit scratches. Been doing it for years, it's what brings home the bacon

Please Please! Make a air bag specific video on what you have learned running bags on your wheeling rigs. Do's and Don'ts. Benefits and negatives really thinking about doing it on a snow rig. Thanks and keep up great videos!

If the back feels like a marshmellow going down the road, a rear swaybar will help. Stiffening the rear shocks might help also

way too many FORDS!!! Happy Year Brother...

Looking great! Earl Scheib is smiling in his grave!

Awesomeness

Fullsizes! Thanks for the great content Dave!

I was in Cheney yesterday, love the land out there, it's so pretty.

That's okay you do great metal work

as a kid there was a earl shy( misspelled) paint shop they paint the whole car for 100 dollars. lol dont buff out

Very cool seeing the all those full size going at it. Especially love the old f250, that's about my favourite style of classic ford. I grew up with 70's and 80's fords.

What a view!!!

I’m so glad to see mom’s spaghetti out of the shop. Still my favorite.

CHENEY!!! That Mustang II is looking very nice. Pretty sure I just threw up in my mouth a little bit kudo'ing a Mustang II but thats ok. IT LOOKS GREAT!

You should build a nice roll pan for that front and very skinny small bumpers make it nice and clean that would help that look immensely

Killer place to ride

Happy New Year to you and yours! When you said you weren't takin the Mustang 4wheelin, I thot: Damn, that'd be fun to see!

Mom’s spaghetti getting it done👍🏻👊🏻. So rad. The stang is looking good

You need to buy or build a waste oil heater. Just burn your used fluids as well as friends, etc . I can't wait to see the final duece stang.

Awesome vid once again Dave happy new yr

🦅🇺🇸💪😎👍 the little car is looking good. You guys had some good looking old Ford's playing

Every one needs an AJ… great job you Guys! Nothing like a little body work to make you tired then some sweet wheeling to wake you back up 😉

Mad props to you and AJ. Happy New Year, Dave.

The POV cam and groan getting into an old Ford, had a glimpse of Zipties and Bias Plies there for a second.

I love that you do all the work to your rigs, then you drive your rigs to wheel them, wheel them then drive home. Love it. No trailer queens. Awesome video bud

You should weld some flat steel on the bottom of those rockers like they did with skateboards so that they can spark when you're on the ground.

Can't wait to see what the final color is.... ;-) Nice work.

Love it man.

18:14 This sounds like a roll axis problem. If the roll axis isn't flat the axle will twist some as the body rolls (roll steer) and this will induce some under or over steer. For the rear axle this is why a negative roll axis (angle tilted down towards the center of the vehicle from the rear) is more stable/predictable (induces understeer). As you turn, the axle twists slightly to counter the turn (crab walking), so the actual amount of steering the truck experiences is less than the steering input - that is understeer. If the angle was positive (sloped up to the right in the side view) then roll reaction to the steering input would cause the vehicles to oversteer, or steer more than the steering wheel input would imply, and it would only happen after the vehicle has rolled so it would be delayed relative to steering input. As it rolls you would need to reduce the steering input slightly if the axle tended to oversteer. For the front, I think the same understeer inducing roll axis angle would again be pointed down towards the center of the vehicle. This would make the angle positive in the side view. The four link calculators mostly show a negative angle value as inducing understeer in both the front and rear axles, but I don't think that is correct. www.pirate4x4.com/threads/roll-axis-angle-question-front-vs-rear-3-link.1997418/post-45038024

Its amazing that is one mans pasture . Just keep these videos coming.

Hey from Missouri Dave!

This is sweet, looks like a fun spot

Looks like you had a good run, I am calling drones "helicopter cameras" from now on

Phenomenal footage and the views are amazing, the wheeling looks like sooooo much fun !!! And the war pony is coming along nicely. Cheers 🇨🇦

Crusher car after you pull motor diff,the mustang 2,Farrah Fawcett on high beam😅😅

Good to see Moms Spaghetti out again. I like that ol truck. The Mustang 2 is definitely coming together. I wasn't sure you was gonna put that much into the body. But its gonna be cool. Happy New Year

Hardware should go in a bag dave, you'll be sorry lol jj. Great video again.

Man i really miss DirEveryDay. Dave i really enjoy watchin your work!

It would appear that you were in the vicinity Of " Moses hole" I used to deliver fuel around there! Good job. I'll send you a PM later on places that might work for your video's. East an west of Spookaloo!

Really cool piece of property and the Mustang is coming along well!

Need to see some videos of work getting done on the mercury that we have been looking at in back of shot for way too long

Depending on how much more time and material you want to invest on the mustang, it would look really cool to fill that back section where the old bumper was and do some 67 mustang bumpers front and rear!

i have one of those compressor from harbor Feight they work good but once in while they blow the fuse in front

Can’t wait to see the mustang cruising around town, i love the ragtop. I’ve looked at them several times for my truck.

i picture that mustang a old school heavy metal flake paint job

Not an LS in sight! Awesome!

Keep it up Dave. Hope 2024 is great for your channel! I’m loving it!

I really like the little mustang content! Keep it coming😊

Thanks Dave, love the Ford content. Keep 'em coming!

That looks like ya'll had a good time. Happy new Year

I've always thought wheeling in that area would be fun, awesome to see a longer video of you doing it!

A nice slender front bumper will improve the front end look considerably!

Dude!!! Mustang is looking good!!! I loved going on the hang-over run !!! Scappoose, Oregon!!! Power line road!!!✌️

Great stuff as always.

Great video as always. It's good to see some wheeling in my neck of the woods. This area has some good and unique opportunities.

Thanks bud, now have my 80 series in the shop for some more maintenance and tires. Unfortunately may have a headgasket issue but I’ll get er done and get back on the trails.

Thanks Dave. I hope your fab skills are used on your day job.

Did you know the more Chevy parts you use the better them Fords run lol ❤

Ran the whole spectrum from, "Oh, the Mustang has been so much work..." 00:40 to "That sounds cool..." 28:44 😂 Love not having to worry about paint.

You said the Mustang II had an engine. You are a kind man.

Hopefully you missed all the cow patties so mom's spaghetti didn't get any extra ingredients... looks like a sweet place to wheel and not have to worry about staying on trail... Thanks for sharing!

Dude, mine was driving exactly like you described. I changed the camber, tires might wear a bit more but it’s driving really nice now.

Hey Dave, you might have some luck fitting some bumpers out of a Fairmont on that. You might have to tweak the mounts but it looks pretty close.

Rad content Dave! I love the videos your putting out. I am currently building up my 96 XJ and hopefully it will wheel they way this one did in this video. I'll be heading to Harbor Freight to grab that compressor when it hits the stores!

ROCK CRAWLING AND REAL 4 WHEELING / MUDDYING ARE TOTALLY DIFFERENT !!!!! LMAO .....

Man, that green Ford (Matt?) looks an awful lot like Harry Wagner's Raymond

Man Dave what kind of agreement do you have with MAMA that you cam work on NYE and go 4 wheelin on NYD Lucky you🤔😳🙃

😁 Do you have an update on your bosses old C10 that you were working on at your job ? 🤔🤙

im surprised that it seems one body's steering wheel is strait great video

Crazy seeing videos from my neck of the woods. I live a few miles down the road from the store you guys were at. Maybe I'll run into you some day. Great content as always!

Your channel is one of my favorites, thanks for all your content. You rock. I always wanted to build a mustang 2, my idea was to use 1971 mustang bumpers. It might look good 😉

🤘🏼

😂 that poor merc is watching this 😅

Like and comment and subscribe people. We need to bring this man home.

Yup.

What kind of real job do you have, is it related to your talent you have Good luck. Great videos thanks

Dude you were in my neck of the woods! Hope I get a chance to wheel with you someday, that would be awesome. Great video!

Another great episode. Been following you since DED started--I like your casual/real style and really appreciate the fabrication that you do. I dig the Mustang II but it would be GREAT to see you get the Mercury on the road. This one on bodywork reminds me why I have been watching more of the 'just get it running' shows like Roadkill Garage, Vice Grip Garage, and DD Speed Shop---bodywork sucks! Saying that, though, I get why you are doing it on the Mustang--it is not quite cool enough to be cool as a really rough driver, but it will be way cool with a paint job. Anyway--keep up the great work and thanks!

I’d really love to see a video on that cool vintage Honda Scooter hiding in the back.

Awesome! Thanks for bringing us a long. Great progress man. I wonder if you asked that friend about the drivers quarter window trim you couldn't get loose? I saw yall work around it. Nice seeing all those fords and fun out there. That reminds me I have or had a Brick nose F150, she was green and gold, 302. At the time I lived way out and couldn't afford the gas and parked it. Dad took it back and parked it at his garage. Hard to tell if it has made it or not. Great truck though.

Even Eastwood deleted that cover on the scroll compressor because of the noise issue.

I to get caught up in the videos on Facebook… particularly the one where the dudes are outside in the dirt, rebuilding a diesel engine with homemade tools and less than adequate parts..all while rocking flip flops 😂 also ones that are welding cast iron spindles on big dump truck axles are baffling….it sucks me in every time! Anytime you can get out wheelin with friends is a good time! Nice work bud!

Is there a plan for a more permanent fuel cell for the Mustard II?

He's not wrong about running the heater all night. Hardeners shut down below 60°. So it's recommended to keep the temp at 65°+. For at least a few hours.

new wife goes off roading...

Would love to wheel with all you guys. This looks like fun.

His palms are sweaty, knees weak, arms are heavy. There’s vomit on his sweater already: Moms Spaghetti.