forge build in an hour and 40 minutes for free

Рет қаралды 858,670

4 жыл бұрын

In this video we will build a forge out of scrap metal for fun free and easy.
#kevinrobinson6688 #HowToBuildAForge #BuildAForge
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V amzn.to/2yviG5x
Hobart 500559 Handler 140 MIG Welder 115V amzn.to/2yrVLYO
Rust-Oleum 241169 High Heat Ultra Enamel Spray, Black, 12-Ounce amzn.to/3blwbTZ
DEWALT Angle Grinder Tool, Paddle Switch, 4-1/2-Inch, 11-Amp (DWE402) amzn.to/3e1Hm63
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keep it real & clean.
Help Support My Channel paypal.me/kevinrobinson6688 Thank You.
Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123

Пікірлер: 648

@thatoneguy955 2 жыл бұрын

Just so everyone knows, that's an air to air boot ment to connect turbo boost tubes to intercoolers on diesel trucks. They are use to 30 to 50 psi at a couple hundred degrees. They can easily take the heat and pressure of a hair dryer.

@Robinson-Homestead 2 жыл бұрын

Thanks for the comment and info.

@budman76191 9 ай бұрын

Also the pipe appears to be either 2 3/8 or 2 7/8 EuE tubing and you can get caps collars Bull plugs at most oil field supply stores or pipe yards

@MattQrillz 8 ай бұрын

Grinder and paint make you the welder you aint 👌

@Robinson-Homestead 7 ай бұрын

Thanks for watching.

@tawakoni2010 2 жыл бұрын

Suddenly feels like the only person in the world who doesn't know what a clinker is...

@TheUpsetter Ай бұрын

Bits of burnt coal!! Ass Clinkers are something else entirely sometimes refered to as wealnuts .

@aberhan 3 жыл бұрын

Finally, someone who uses a torch.👍

@Robinson-Homestead 3 жыл бұрын

LOL thanks for watching

@fxnepilogue 2 жыл бұрын

Forge looks great! You’re tougher than I am welding flux core without gloves 😂😂 some of those BB’s are painful!

@Robinson-Homestead 2 жыл бұрын

They are sometime lol thanks for the comment and watching

@MrAllan9 2 жыл бұрын

Great video for a quick forge build, and built from scrap, my kind of build.👍

@ruatarengsicolneyrengsi8924 2 жыл бұрын

Very imaginative. Great for scrap collectors like me. You are efficient and relaxed when working. Really inspiring. Thanks for sharing.

@Robinson-Homestead 2 жыл бұрын

Thanks for the comment glad you liked it.

@gerardbauer4035 4 жыл бұрын

Great build. Love watching your videos. Looking forward to your next project. Take care.

@Robinson-Homestead 4 жыл бұрын

I Love projects especially if they're free.

@KEVINNOAD1 Жыл бұрын

Wow !!!

@Robinson-Homestead Жыл бұрын

Thanks for the comment.

@angusmacmillan5365 2 жыл бұрын

Great little forge.

@hectorfmaldonado5875 2 жыл бұрын

Great Job Kevin, works perfect as a heater also. A solid 10 for you sir.

@Robinson-Homestead 2 жыл бұрын

Thank you my friend glad you liked it.

@richardheaton6406 2 жыл бұрын

Great little small forge thanks for the video

@natester1064 2 жыл бұрын

You did a great job! Your exactly right...function before form.

@Robinson-Homestead 2 жыл бұрын

Thank you my friend.

@williamlangdon6809 2 жыл бұрын

Great build. Thanks for the upload.

@johnlogan8218 6 ай бұрын

Nice to see some one who can use a torch and weld decent

@Robinson-Homestead 6 ай бұрын

Thanks John.

@carlossmith607 2 жыл бұрын

I've been wanting to do this for awhile now with a free greasy truck brake drum. Thanks for the tutorial!

@Robinson-Homestead 2 жыл бұрын

Fun project thanks for the comment

@Redneckmfg 4 жыл бұрын

Very nice build !!! Quick too....

@findingikigai9834 2 жыл бұрын

Just made my own! Much of my inspiration came from this video and I credited you on my channel. Thanks for sharing this!

@Robinson-Homestead 2 жыл бұрын

Thank you you make a video?

@ajadams9278 2 жыл бұрын

Sweet,simple, and functional

@Robinson-Homestead 2 жыл бұрын

Thanks AJ.

@markjauregui8138 Жыл бұрын

Easy simple, glad I stumbled on to this video... Never thought I would be able to make me one of these forges... Thanks for sharing...

@Robinson-Homestead Жыл бұрын

Your welcome and if you need more information on it i have a play list with more forge videos, thanks for watching.

@theusconstitution1776 2 жыл бұрын

Nice job fit and function is damn near perfect now I’m headed off to my local big truck repair shop to get a brake drum maybe something just a little bigger than that! Thanks for the idea and the instruction God bless America

@Robinson-Homestead 2 жыл бұрын

Glad you liked it Pete if I can help let me know good luck my friend.

@stephenjohnson6841 2 жыл бұрын

Awesome job. Function is always more important than appearance. Great writte work!

@Robinson-Homestead 2 жыл бұрын

Thank you

@NwoDispatcher 11 ай бұрын

Great White work

@AdamosDad Жыл бұрын

I had a job once where my job title was Plant manager/Blacksmith Engineer, you have that kind of knowledge and talent.

@Robinson-Homestead Жыл бұрын

Thank you so much for the comment AdamosDad.

@jplieurance 2 жыл бұрын

Nicely done. Not only effective, but takes the mystery (and cost) out of forges. Thanks.

@Robinson-Homestead 2 жыл бұрын

Fun project thanks for the comment.

@Robinson-Homestead 2 жыл бұрын

I have a lot of videos on how to build a forge in my playlist

@roththana9993 2 жыл бұрын

Thank you for you contribution. 👍💖

@Robinson-Homestead 2 жыл бұрын

Always welcome

@explorer867 4 жыл бұрын

Kevin what a great forge project. 👍

@Robinson-Homestead 4 жыл бұрын

Thanks Explorer 867.

@thebeardedone1225 6 ай бұрын

Great idea for a quick and efficient forge.

@Robinson-Homestead 6 ай бұрын

Thank you.

@mikehenry5688 2 жыл бұрын

Very Nice - Simple but it looks very effective

@robradcliff6415 2 жыл бұрын

Just wanted to say thanks. Been wanting to build a small cheap forge for projects and hobby work. I thought I would have to get in my pocket a good bit, thanks to this video, I know I can find everything for at most $10-$15 if even that much, so thank you my friend.

@Robinson-Homestead 2 жыл бұрын

Thanks for the comment and watching glad to help.

@Dailyartpallette 2 жыл бұрын

Great little forge

@Robinson-Homestead 2 жыл бұрын

Thank you

@danjunk-DIY 2 жыл бұрын

Very impressive Mr Kevin ! Great job !

@Robinson-Homestead 2 жыл бұрын

Thank you

@phil36135 10 ай бұрын

Great job, I like the design. Its simple,cheap,and parts are easy to get.

@Robinson-Homestead 9 ай бұрын

Glad you like it! Thanks for the comment and watching.

@rt9934 2 жыл бұрын

Thank you Kevin for sharing this. I love it, Functional not Pretty. Great! Greetings from Europe and best regards.

@Robinson-Homestead 2 жыл бұрын

Glad you like it! thanks for the comment.

@jasblick9984 2 жыл бұрын

Great job and thanks for sharing the build. God bless

@Robinson-Homestead 2 жыл бұрын

Thank you Jas.

@Sunrayman123 Жыл бұрын

Thank you Kevin! This video makes me want to run out and buy a set of torches...!

@richhalmuth160 2 жыл бұрын

Thank you for this amazing video I'm going to build a forge and this is a perfect way to build one

@Robinson-Homestead 2 жыл бұрын

This is a good little forge fun build thanks for the comment and watching.

@C-M-E 2 жыл бұрын

I think everybody starts with a hairdryer for their first low-buck forge. I still have one that looks like it was in a housefire from my first, and it still blows air mostly out the front! Since moving up to a 'high bypass' leaf blower (😎) that can scream more air in for crucible days, my only problem is finding good diameter stainless steel that won't melt! Oddly enough, charcoal chimney-style starters are a lot more durable than you'd think for that purpose, or I lucked out and the factory that day was running Inconel, ha! Yes, your coupler is silicone and will handle ~800F, though as you said, as long as air is passing through and around it, you'd have to worry about the welds melting down first long before your heat ever gets way down there! Junkyard Forge works every time.

@captaincolumbus5946 2 жыл бұрын

🚣🏴󠁧󠁢󠁥󠁮󠁧󠁿 I going to try flux cored. Looks top heavy. Thanks for them video. Admire your stuff. Just sussed out a old sewing machine. Have fun. Peace and love everyone Rick🇬🇧 🌈❤

@SKYHAWK0115 2 жыл бұрын

That's a great looking forge. Thanks for sharing. Keep up the videos. If you create knives, please show your builds. Thanks !

@rami3433 2 жыл бұрын

Great job Kevin

@harryschexnayder169 2 жыл бұрын

A brake DRUM not a disc would have given you depth(more coal)

@gregorykendrick8138 Жыл бұрын

I agree with the comment below. Great Job!!!

@dannyverhamme7970 10 ай бұрын

The magick of the flame! 🤩

@Robinson-Homestead 10 ай бұрын

Next one I'll do in 30 seconds LOL

@VanillahGarillah Жыл бұрын

You really love your torch!

@Robinson-Homestead Жыл бұрын

Lol i do it makes projects go faster.

@Pinoyphilly 2 жыл бұрын

cool.. your shop islike mine: organized chaos but everything works and within reach. thanks for this video. You are the real McGyver

@Robinson-Homestead 2 жыл бұрын

Have you seen my new shop little bigger have video.

@fredford7642 2 жыл бұрын

Great idea for a forge! I am going to copy your idea with much thanks, but I am going to ad another brake drum with a hinge on top. so that I can add a little more coal, and also have a lid on it to increase the heat if needed. The top cove will have a cutout so that I can have longer items in the forge. Once again, thank you for the great idea. It just so happens there is a heavy truck garage down the road, maybe they will have a few spare old drums.

@Robinson-Homestead Жыл бұрын

All yours thanks for the comment and watching how did it turn out?

@paulorchard7960 Жыл бұрын

My first forge I used a bean can and silver tape to connect the hair dryer, worked as good as it needed to until I upgraded! The point is, if you want to give it a go just do it, find, beg,borrow or pilfer the materials to build and get started, you wont regret it, unless the pilfering part bites you in the arse!😂 get forging, its great fun and very addictive!

@Robinson-Homestead Жыл бұрын

Thanks for the comment Paul.

@drunkwoodswyllia4885 9 ай бұрын

That’s awesome thank you sir for sharing your knowledge

@Robinson-Homestead 9 ай бұрын

You are very welcome. Thank you so much for the comment and watching.

@jdmcwteg 2 жыл бұрын

Great work. Lots of inspiration from this video

@Robinson-Homestead 2 жыл бұрын

Thank you.

@nathansilver4736 5 ай бұрын

Thank you.

@Robinson-Homestead 5 ай бұрын

Thank you so much for the comment.

@shitmonkey Жыл бұрын

The idea of adding a ring to increase the depth of your coals can also work out as a secondary use for this as a smelter

@Robinson-Homestead Жыл бұрын

Thanks for the idea Jim.

@Mtbambeno 2 жыл бұрын

44 seconds and I'm done done blew out my eardrums listening with earbuds

@Mark_72 Жыл бұрын

That sure is a good, and clean job.

@Robinson-Homestead Жыл бұрын

Thank you Mark.

@markhaith4720 Жыл бұрын

Clever. The rubber looks like an aftermarket turbo collector, probably been pointed out before!

@Robinson-Homestead Жыл бұрын

Your right Mark thanks for the comment.

@SDMountainMan 11 ай бұрын

Very cool got pieces together for drum type just gotta weld legs and I didn't know about that rattler deal thinking I'm going to use some old t Post that were Bent should have 3 with enough straight to make leg's

@Robinson-Homestead 11 ай бұрын

That works thanks S.D.

@scottloftin1730 2 жыл бұрын

Nice shop. You have some pretty serious equipment.

@er8719 Жыл бұрын

Great video thank you

@firstmkb 2 жыл бұрын

Great build - I don’t know why KZfaq waited two years to show it to me. I don’t know what I need more, a forge, or a use for the extra brake rotors I saved!

@JI-ev9pp 6 ай бұрын

Cut a hole in an empty 50 gal metal drum that fits your drum. Pop a hole in the side for a hair dryer then toss a metal grate in the bottom to keep the coal from falling through. It works like a charm.

@Robinson-Homestead 6 ай бұрын

Thanks for sharing.

@charlesseymour1482 2 жыл бұрын

my kinda forge. well done on the forge and great job on the video.

@Robinson-Homestead 2 жыл бұрын

Thanks for watching

@saintmichael3879 Жыл бұрын

Great stuff. Thank you sir.

@Robinson-Homestead Жыл бұрын

Glad you liked it thanks for the comment.

@jamesveach6918 4 жыл бұрын

your a good man Kevin

@Robinson-Homestead 4 жыл бұрын

Thank you James I've been sick sorry for the late reply

@JOEZEP54 4 жыл бұрын

Nice build. I am looking for ideas for a forge, the "clinker breaker" is a new one for me. Very practical.

@Robinson-Homestead 4 жыл бұрын

I have a lot of videos on forge building gas and coal.

@TimmyGC 2 жыл бұрын

Parts, an air source (Blowdrier), a grate to keep coals from entering the air source (not needed if it is fed horizontally), a container for the heat (the drum brake) and a stand if you want it elevated

@budgetbuilt.4098 2 жыл бұрын

Awesome idea for a forge. I'm going to build something similar myself. Cheers for the great idea.

@Robinson-Homestead 2 жыл бұрын

Thanks for the comment good luck on your build.

@budgetbuilt.4098 Жыл бұрын

Thanks again for the great idea, here's what I made of it. kzfaq.info/get/bejne/p71zn7x4ypmrhIk.html Cheers Roman.

@dusty3275 Жыл бұрын

Not one "ouch that's hot" comment in the video, haha awesome forge too. Love the simplicity of the whole process.

@Robinson-Homestead Жыл бұрын

Haha thanks for watching.

@waynesmith7487 2 жыл бұрын

This video makes me want to build a forge!

@Robinson-Homestead 2 жыл бұрын

You can do it my friend have some fun thanks for watching and the comment

@TomokosEnterprize 4 жыл бұрын

I have been bolting rotors together for pedestal grinders/polishers for years now. I can get them for free from my local tire store. Love this little forge bud. I am going to stop and get a rotor or two from the logging truck shop I used to be the head fabricator for and make a pedestal with one and a forge with the other. Love that clinker breaker. Great idea fella ! Neat build from a bunch of scrap Kevin, Well done !

@Robinson-Homestead 4 жыл бұрын

Thanks Dean I've been sick sorry for the late reply

@TomokosEnterprize Жыл бұрын

@@Robinson-Homestead I hope you are on the mend bud.

@MyLife-lg6tg 9 ай бұрын

I've already got the drum and pipe and several small blowers. Your video has inspired me to put it togather! Thanks Dan S. FROM Michigan & Texas

@TomokosEnterprize 9 ай бұрын

@@MyLife-lg6tg These forges really shine when the parts are the right size for smaller pieces. Briquets are an inexpensive fuel and last a good long time. I can do a 3 or 4 automotive piston melt and pour in just over an hour. Sure nothing wrong about that and it is recycling too. Win, win eh.

@johnvaness8445 Жыл бұрын

Great video, thanks!

@Robinson-Homestead Жыл бұрын

Glad you liked it! Thank you so much for the comment and watching.

@bigcws4522 2 жыл бұрын

Awesome job!

@Robinson-Homestead 2 жыл бұрын

Thank you.

@rickywestley6820 9 ай бұрын

Good video. Thanks for that.

@Robinson-Homestead 9 ай бұрын

No problem! Thanks for watching

@squip88 Жыл бұрын

That looks great!! Would stop the birds getting down the chimney too!

@Robinson-Homestead Жыл бұрын

Thanks i appreciate the comment and you watching.

@williamdillon4282 2 жыл бұрын

Very cool build thanks

@Robinson-Homestead 2 жыл бұрын

Thanks for the comment glad you liked it

@ronhart8857 4 жыл бұрын

Very nice job Kevin.

@Robinson-Homestead 4 жыл бұрын

Thanks Ron.

@Jennegga785 2 жыл бұрын

Fantastic !!!

@Robinson-Homestead 2 жыл бұрын

Thank you for the comment

@huntingfishing1704 2 жыл бұрын

Very cool

@cmw184 9 ай бұрын

Perfect rivet maker

@Robinson-Homestead 9 ай бұрын

Good idea thanks.

@supernatureza 4 жыл бұрын

Very good friend

@Hatch61 4 жыл бұрын

Nice little build for short money. Thanks for letting us watch. Be well my friend.

@Robinson-Homestead 4 жыл бұрын

Thanks Hatch I've been sick sorry for the late reply.

@Foontflaky 2 жыл бұрын

Real good stuff.

@Robinson-Homestead 2 жыл бұрын

Thank you

@stanleybowman4464 2 жыл бұрын

Very impressive Kevin. The flux core is running well & I think I will go down that road for fabrication of projects.!!

@elijahbates9643 Жыл бұрын

Tbh flux core is garbage

@ProleDaddy 9 ай бұрын

@@elijahbates9643 You're ego and lack of knowledge is showing. Please tuck all that back in.

@gwilbur1 2 жыл бұрын

excellent idea.

@Robinson-Homestead 2 жыл бұрын

Thanks Guy.

@edmundocordova4535 9 ай бұрын

GENIAL GRACIAS

@Robinson-Homestead 9 ай бұрын

Thanks for watching.

@1stMrSoundguy 2 жыл бұрын

looks great love the idea may use my old drums

@Robinson-Homestead 2 жыл бұрын

Thanks for watching Rick

@kenkalinowski449 Жыл бұрын

Friday November 29th....OMG....this video is from the future!!!!

@Robinson-Homestead Жыл бұрын

I guess you didn't see the video where I built the time machine LOLl

@TomokosEnterprize Жыл бұрын

Wow, I haven't been here in ages. Crazy how busy life gets that draws us apart eh old friend. I trust/hope all is well at the new homestead my old friend.

@Robinson-Homestead Жыл бұрын

It's so good to hear from you friend you have to see my cat she works with me I name her after your dog Sophie lol Thank you so much for the visit.

@TomokosEnterprize Жыл бұрын

@@Robinson-Homestead It is nice to see what you are up to these days. I was just reminiscing about the day you turned left off the road into that wall of bush. I have a bunch to get caught up on. I just told her about your little fe-line. I think she liked that and it makes me feel kind of special too my friend. Thanks eh.

@Robinson-Homestead Жыл бұрын

Tomoko ,it is good to hear from you , yes we came a long way but still a lot of projects to do maybe one day we will get done but i doubt it lol.I am glad to hear your doggie like that we named our kitty cat after her. take care and thanks for watching.

@TomokosEnterprize Жыл бұрын

@@Robinson-Homestead One guarantee in life when we go into a situation that you have here is there will NEVER be nothing to do, LOL. Big or small, makes no difference eh. Getting the big takes 20% of the time and that 80% of the time for finishing as you know sooooo well SO YOU CAN PLAN ON TAKING IT EASY IN YOUR SEINIOR YEARS. It will be really nice to travel along with you old friend.

@neanderthaloutdoors9202 Жыл бұрын

Good project, I made my forge out of an old camping gas bottle, I cut it in half length way's and inverted one half into the other and seam welded them together, but not before cutting a hole for the hair dryer, then drilled holes along the length of the furnace bottom for air flow from the dryer, works brilliantly. All the best to you. Paul.

@Robinson-Homestead Жыл бұрын

Cool idea

@Jason-hg1pc 9 ай бұрын

Did you sand off the exterior coating of enamel paint?

@paulmorrey733 2 жыл бұрын

Thanks

@Robinson-Homestead 2 жыл бұрын

Thank you for the comment and watching Paul

@Aaron_Barrett 9 ай бұрын

I like your shop! ❤

@Robinson-Homestead 9 ай бұрын

Thank you!

@James-fs4rn 2 жыл бұрын

👍well done!

@Robinson-Homestead 2 жыл бұрын

Thank you James

@robertomontanoruiz1192 2 жыл бұрын

Cool.

@Robinson-Homestead 2 жыл бұрын

Thank you

@joejhurojr3914 2 жыл бұрын

I goning to build myself one, thanks for a great video Kevin.

@Robinson-Homestead 2 жыл бұрын

Fun project

@Yaackov1 5 ай бұрын

Thanks for sharing m8

@Robinson-Homestead 5 ай бұрын

Thank you.

@lorenzodelacruz1887 2 жыл бұрын

Very good show. Thanks for the ideas.

@Robinson-Homestead 2 жыл бұрын

Thank you for the comment glad you liked it.

@vikingo1976 2 жыл бұрын

nice nice regards from venezuela i enjoed

@Robinson-Homestead 2 жыл бұрын

Thank you.

@hansfranson6570 2 жыл бұрын

Very good work!

@Robinson-Homestead 2 жыл бұрын

Thank you Hans Franson

@Jonodrew1286 2 жыл бұрын

Your Forge design is compact and very practical - Like the finished product and demonstration - keep up the good work 👌👍👍😵‍💫👍

@Robinson-Homestead 2 жыл бұрын

Thank you glad you liked it fun project

@robertrook2714 2 жыл бұрын

Nice job

@nuxboxen 8 ай бұрын

neat build

@Robinson-Homestead 7 ай бұрын

Thanks

@dannydunnagan3267 4 жыл бұрын

Nice job it,s good to have the right tools to work with.

@Robinson-Homestead 4 жыл бұрын

That's for sure thanks Danny I've been sick sorry for the late reply

@dannydunnagan3267 4 жыл бұрын

we have been sick too stomach virus.

@Robinson-Homestead 4 жыл бұрын

@@dannydunnagan3267 had a sinus infection now I got a cough I can't get rid of.

@6lr6ak6 2 жыл бұрын

Great job👍

@Robinson-Homestead 2 жыл бұрын

Thank you